[PATCH AUTOSEL 4.19 03/68] HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT

[PATCH AUTOSEL 4.19 03/68] HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT

[Sasha Levin]

From: Ilya Trukhanov <lahvuun@gmail.com>

[ Upstream commit 65f11c72780fa9d598df88def045ccb6a885cf80 ]

Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force
gamepad. Compared to other Thrustmaster devices, left and right rumble
motors here are swapped.

Signed-off-by: Ilya Trukhanov <lahvuun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-tmff.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index bea8def64f437..30b8c3256c991 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -34,6 +34,8 @@
 
 #include "hid-ids.h"
 
+#define THRUSTMASTER_DEVICE_ID_2_IN_1_DT	0xb320
+
 static const signed short ff_rumble[] = {
 	FF_RUMBLE,
 	-1
@@ -88,6 +90,7 @@ static int tmff_play(struct input_dev *dev, void *data,
 	struct hid_field *ff_field = tmff->ff_field;
 	int x, y;
 	int left, right;	/* Rumbling */
+	int motor_swap;
 
 	switch (effect->type) {
 	case FF_CONSTANT:
@@ -112,6 +115,13 @@ static int tmff_play(struct input_dev *dev, void *data,
 					ff_field->logical_minimum,
 					ff_field->logical_maximum);
 
+		/* 2-in-1 strong motor is left */
+		if (hid->product == THRUSTMASTER_DEVICE_ID_2_IN_1_DT) {
+			motor_swap = left;
+			left = right;
+			right = motor_swap;
+		}
+
 		dbg_hid("(left,right)=(%08x, %08x)\n", left, right);
 		ff_field->value[0] = left;
 		ff_field->value[1] = right;
@@ -238,6 +248,8 @@ static const struct hid_device_id tm_devices[] = {
 		.driver_data = (unsigned long)ff_rumble },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304),   /* FireStorm Dual Power 2 (and 3) */
 		.driver_data = (unsigned long)ff_rumble },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, THRUSTMASTER_DEVICE_ID_2_IN_1_DT),   /* Dual Trigger 2-in-1 */
+		.driver_data = (unsigned long)ff_rumble },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb323),   /* Dual Trigger 3-in-1 (PC Mode) */
 		.driver_data = (unsigned long)ff_rumble },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb324),   /* Dual Trigger 3-in-1 (PS3 Mode) */
-- 
2.20.1

[PATCH AUTOSEL 4.19 35/68] Input: kbtab - sanity check for endpoint type

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit c88090dfc84254fa149174eb3e6a8458de1912c4 ]

The driver should check whether the endpoint it uses has the correct
type.

Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/tablet/kbtab.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
index 75b500651e4e4..b1cf0c9712740 100644
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -116,6 +116,10 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
 		return -ENODEV;
 
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
 	kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!kbtab || !input_dev)
@@ -154,8 +158,6 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
 
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
 	usb_fill_int_urb(kbtab->irq, dev,
 			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
 			 kbtab->data, 8,
-- 
2.20.1

[PATCH AUTOSEL 4.19 42/68] HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52

[Sasha Levin]

From: István Váradi <ivaradi@varadiistvan.hu>

[ Upstream commit 7bc74853fd61432ec59f812a40425bf6d8c986a4 ]

The Saitek X52 joystick has a pair of axes that are originally
(by the Windows driver) used as mouse pointer controls. The corresponding
usage->hid values are 0x50024 and 0x50026. Thus they are handled
as unknown axes and both get mapped to ABS_MISC. The quirk makes
the second axis to be mapped to ABS_MISC1 and thus made available
separately.

[jkosina@suse.cz: squashed two patches into one]
Signed-off-by: István Váradi <ivaradi@varadiistvan.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 2898bb0619454..4a2fa57ddcb84 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -971,6 +971,7 @@
 #define USB_DEVICE_ID_SAITEK_RAT7	0x0cd7
 #define USB_DEVICE_ID_SAITEK_RAT9	0x0cfa
 #define USB_DEVICE_ID_SAITEK_MMO7	0x0cd0
+#define USB_DEVICE_ID_SAITEK_X52	0x075c
 
 #define USB_VENDOR_ID_SAMSUNG		0x0419
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index d29c7c9cd185d..e553f6fae7a4c 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -143,6 +143,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RETROUSB, USB_DEVICE_ID_RETROUSB_SNES_RETROPAD), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RETROUSB, USB_DEVICE_ID_RETROUSB_SNES_RETROPORT), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD), HID_QUIRK_BADPAD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD2), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB), HID_QUIRK_NOGET },
-- 
2.20.1

[PATCH AUTOSEL 4.19 43/68] HID: holtek: test for sanity of intfdata

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit 01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 ]

The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.

[jkosina@suse.cz: fix newly added spurious space]
Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-holtek-kbd.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-holtek-kbd.c b/drivers/hid/hid-holtek-kbd.c
index 6e1a4a4fc0c10..ab9da597106fa 100644
--- a/drivers/hid/hid-holtek-kbd.c
+++ b/drivers/hid/hid-holtek-kbd.c
@@ -126,9 +126,14 @@ static int holtek_kbd_input_event(struct input_dev *dev, unsigned int type,
 
 	/* Locate the boot interface, to receive the LED change events */
 	struct usb_interface *boot_interface = usb_ifnum_to_if(usb_dev, 0);
+	struct hid_device *boot_hid;
+	struct hid_input *boot_hid_input;
 
-	struct hid_device *boot_hid = usb_get_intfdata(boot_interface);
-	struct hid_input *boot_hid_input = list_first_entry(&boot_hid->inputs,
+	if (unlikely(boot_interface == NULL))
+		return -ENODEV;
+
+	boot_hid = usb_get_intfdata(boot_interface);
+	boot_hid_input = list_first_entry(&boot_hid->inputs,
 		struct hid_input, list);
 
 	return boot_hid_input->input->event(boot_hid_input->input, type, code,
-- 
2.20.1

[PATCH AUTOSEL 4.19 44/68] HID: input: fix a4tech horizontal wheel custom usage

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit 1c703b53e5bfb5c2205c30f0fb157ce271fd42fb ]

Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether
the previous wheel report was horizontal or vertical. Before
c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key") this
usage was being mapped to 'Relative.Misc'. After the patch it's simply
ignored (usage->type == 0 & usage->code == 0). Which ultimately makes
hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no
usage->type.

We shouldn't rely on a mapping for that usage as it's nonstandard and
doesn't really map to an input event. So we bypass the mapping and make
sure the custom event handling properly handles both reports.

Fixes: c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-a4tech.c | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-a4tech.c b/drivers/hid/hid-a4tech.c
index 9428ea7cdf8a0..c52bd163abb3e 100644
--- a/drivers/hid/hid-a4tech.c
+++ b/drivers/hid/hid-a4tech.c
@@ -26,12 +26,36 @@
 #define A4_2WHEEL_MOUSE_HACK_7	0x01
 #define A4_2WHEEL_MOUSE_HACK_B8	0x02
 
+#define A4_WHEEL_ORIENTATION	(HID_UP_GENDESK | 0x000000b8)
+
 struct a4tech_sc {
 	unsigned long quirks;
 	unsigned int hw_wheel;
 	__s32 delayed_value;
 };
 
+static int a4_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+			    struct hid_field *field, struct hid_usage *usage,
+			    unsigned long **bit, int *max)
+{
+	struct a4tech_sc *a4 = hid_get_drvdata(hdev);
+
+	if (a4->quirks & A4_2WHEEL_MOUSE_HACK_B8 &&
+	    usage->hid == A4_WHEEL_ORIENTATION) {
+		/*
+		 * We do not want to have this usage mapped to anything as it's
+		 * nonstandard and doesn't really behave like an HID report.
+		 * It's only selecting the orientation (vertical/horizontal) of
+		 * the previous mouse wheel report. The input_events will be
+		 * generated once both reports are recorded in a4_event().
+		 */
+		return -1;
+	}
+
+	return 0;
+
+}
+
 static int a4_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
@@ -53,8 +77,7 @@ static int a4_event(struct hid_device *hdev, struct hid_field *field,
 	struct a4tech_sc *a4 = hid_get_drvdata(hdev);
 	struct input_dev *input;
 
-	if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput ||
-			!usage->type)
+	if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput)
 		return 0;
 
 	input = field->hidinput->input;
@@ -65,7 +88,7 @@ static int a4_event(struct hid_device *hdev, struct hid_field *field,
 			return 1;
 		}
 
-		if (usage->hid == 0x000100b8) {
+		if (usage->hid == A4_WHEEL_ORIENTATION) {
 			input_event(input, EV_REL, value ? REL_HWHEEL :
 					REL_WHEEL, a4->delayed_value);
 			return 1;
@@ -129,6 +152,7 @@ MODULE_DEVICE_TABLE(hid, a4_devices);
 static struct hid_driver a4_driver = {
 	.name = "a4tech",
 	.id_table = a4_devices,
+	.input_mapping = a4_input_mapping,
 	.input_mapped = a4_input_mapped,
 	.event = a4_event,
 	.probe = a4_probe,
-- 
2.20.1

[PATCH AUTOSEL 4.19 48/68] HID: hiddev: avoid opening a disconnected device

[Sasha Levin]

From: Hillf Danton <hdanton@sina.com>

[ Upstream commit 9c09b214f30e3c11f9b0b03f89442df03643794d ]

syzbot found the following crash on:

HEAD commit:    e96407b4 usb-fuzzer: main usb gadget fuzzer driver
git tree:       https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=792eb47789f57810
dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)

==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260

CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753
  lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412
  __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
  _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159
  hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  exit_task_work include/linux/task_work.h:22 [inline]
  do_exit+0x8ef/0x2c50 kernel/exit.c:878
  do_group_exit+0x125/0x340 kernel/exit.c:982
  get_signal+0x466/0x23d0 kernel/signal.c:2728
  do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815
  exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078
RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c
R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c

Allocated by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff8881cf591900
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8881cf591900, ffff8881cf591b00)
The buggy address belongs to the page:
page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.

Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/usbhid/hiddev.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index a746017fac170..56da33bc3862e 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -297,6 +297,14 @@ static int hiddev_open(struct inode *inode, struct file *file)
 	spin_unlock_irq(&list->hiddev->list_lock);
 
 	mutex_lock(&hiddev->existancelock);
+	/*
+	 * recheck exist with existance lock held to
+	 * avoid opening a disconnected device
+	 */
+	if (!list->hiddev->exist) {
+		res = -ENODEV;
+		goto bail_unlock;
+	}
 	if (!list->hiddev->open++)
 		if (list->hiddev->exist) {
 			struct hid_device *hid = hiddev->hid;
-- 
2.20.1

[PATCH AUTOSEL 4.19 49/68] HID: hiddev: do cleanup in failure of opening a device

[Sasha Levin]

From: Hillf Danton <hdanton@sina.com>

[ Upstream commit 6d4472d7bec39917b54e4e80245784ea5d60ce49 ]

Undo what we did for opening before releasing the memory slice.

Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/usbhid/hiddev.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 56da33bc3862e..5a949ca42b1d0 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -321,6 +321,10 @@ static int hiddev_open(struct inode *inode, struct file *file)
 	hid_hw_power(hid, PM_HINT_NORMAL);
 bail_unlock:
 	mutex_unlock(&hiddev->existancelock);
+
+	spin_lock_irq(&list->hiddev->list_lock);
+	list_del(&list->node);
+	spin_unlock_irq(&list->hiddev->list_lock);
 bail:
 	file->private_data = NULL;
 	vfree(list);
-- 
2.20.1

[PATCH AUTOSEL 4.19 51/68] Input: iforce - add sanity checks

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit 849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c ]

The endpoint type should also be checked before a device
is accepted.

Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/iforce/iforce-usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 78073259c9a1a..c431df7401b44 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -141,7 +141,12 @@ static int iforce_usb_probe(struct usb_interface *intf,
 		return -ENODEV;
 
 	epirq = &interface->endpoint[0].desc;
+	if (!usb_endpoint_is_int_in(epirq))
+		return -ENODEV;
+
 	epout = &interface->endpoint[1].desc;
+	if (!usb_endpoint_is_int_out(epout))
+		return -ENODEV;
 
 	if (!(iforce = kzalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
 		goto fail;
-- 
2.20.1