From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: "Allison Randal" <allison@lohutok.net>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Dong Aisheng" <aisheng.dong@nxp.com>,
"Jacky Bai" <ping.bai@nxp.com>,
"Marco Felsch" <m.felsch@pengutronix.de>,
"Ronald Tschalär" <ronald@innovation.ch>,
"Stefan Agner" <stefan@agner.ch>,
linux-kernel@vger.kernel.org
Subject: [PATCH 05/22] Input: adc-keys - switch to using polled mode of input devices
Date: Thu, 17 Oct 2019 13:41:59 -0700 [thread overview]
Message-ID: <20191017204217.106453-6-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20191017204217.106453-1-dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts adc-keys driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/keyboard/Kconfig | 1 -
drivers/input/keyboard/adc-keys.c | 36 ++++++++++++++++---------------
2 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a716a90de683..c6bf99d23b1a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -16,7 +16,6 @@ if INPUT_KEYBOARD
config KEYBOARD_ADC
tristate "ADC Ladder Buttons"
depends on IIO
- select INPUT_POLLDEV
help
This driver implements support for buttons connected
to an ADC using a resistor ladder.
diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c
index 9885fd56f5f9..6d5be48d1b3d 100644
--- a/drivers/input/keyboard/adc-keys.c
+++ b/drivers/input/keyboard/adc-keys.c
@@ -9,7 +9,6 @@
#include <linux/iio/consumer.h>
#include <linux/iio/types.h>
#include <linux/input.h>
-#include <linux/input-polldev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -30,9 +29,9 @@ struct adc_keys_state {
const struct adc_keys_button *map;
};
-static void adc_keys_poll(struct input_polled_dev *dev)
+static void adc_keys_poll(struct input_dev *input)
{
- struct adc_keys_state *st = dev->private;
+ struct adc_keys_state *st = input_get_drvdata(input);
int i, value, ret;
u32 diff, closest = 0xffffffff;
int keycode = 0;
@@ -55,12 +54,12 @@ static void adc_keys_poll(struct input_polled_dev *dev)
keycode = 0;
if (st->last_key && st->last_key != keycode)
- input_report_key(dev->input, st->last_key, 0);
+ input_report_key(input, st->last_key, 0);
if (keycode)
- input_report_key(dev->input, keycode, 1);
+ input_report_key(input, keycode, 1);
- input_sync(dev->input);
+ input_sync(input);
st->last_key = keycode;
}
@@ -108,7 +107,6 @@ static int adc_keys_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct adc_keys_state *st;
- struct input_polled_dev *poll_dev;
struct input_dev *input;
enum iio_chan_type type;
int i, value;
@@ -145,19 +143,13 @@ static int adc_keys_probe(struct platform_device *pdev)
if (error)
return error;
- poll_dev = devm_input_allocate_polled_device(dev);
- if (!poll_dev) {
+ input = devm_input_allocate_device(dev);
+ if (!input) {
dev_err(dev, "failed to allocate input device\n");
return -ENOMEM;
}
- if (!device_property_read_u32(dev, "poll-interval", &value))
- poll_dev->poll_interval = value;
-
- poll_dev->poll = adc_keys_poll;
- poll_dev->private = st;
-
- input = poll_dev->input;
+ input_set_drvdata(input, st);
input->name = pdev->name;
input->phys = "adc-keys/input0";
@@ -174,7 +166,17 @@ static int adc_keys_probe(struct platform_device *pdev)
if (device_property_read_bool(dev, "autorepeat"))
__set_bit(EV_REP, input->evbit);
- error = input_register_polled_device(poll_dev);
+
+ error = input_setup_polling(input, adc_keys_poll);
+ if (error) {
+ dev_err(dev, "Unable to set up polling: %d\n", error);
+ return error;
+ }
+
+ if (!device_property_read_u32(dev, "poll-interval", &value))
+ input_set_poll_interval(input, value);
+
+ error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device: %d\n", error);
return error;
--
2.23.0.866.gb869b98d4c-goog
next prev parent reply other threads:[~2019-10-17 20:44 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-17 20:41 [PATCH 00/22] Stop using input_polled_dev in polling drivers Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 01/22] Input: raspberrypi-ts - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 02/22] Input: sur40 " Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 03/22] Input: ts4800-ts " Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 04/22] Input: tsc6507x-ts " Dmitry Torokhov
2019-10-17 20:41 ` Dmitry Torokhov [this message]
2019-10-17 20:42 ` [PATCH 06/22] Input: clps711x-keypad " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 07/22] Input: jornada680_kbd " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 08/22] Input: gpio_keys_polled " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 09/22] Input: apanel " Dmitry Torokhov
2019-10-21 20:05 ` Sven Van Asbroeck
2019-10-21 21:27 ` Dmitry Torokhov
2019-10-22 13:21 ` Sven Van Asbroeck
2019-10-17 20:42 ` [PATCH 10/22] Input: wistron_btns " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 11/22] Input: cobalt_btns - convert to use managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 12/22] Input: cobalt_btns - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 13/22] Input: sgi_btns - switch to using managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 14/22] Input: sgi_btns - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 15/22] Input: rb532_button - switch to using managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 16/22] Input: rb532_button - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 17/22] Input: gpio_decoder " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 18/22] Input: mma8450 " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 19/22] Input: bma150 - use managed resources helpers Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 20/22] Input: bma150 - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 21/22] Input: kxtj9 - switch to using managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 22/22] Input: kxtj9 - switch to using polled mode of input devices Dmitry Torokhov
2019-10-18 8:44 ` [PATCH 00/22] Stop using input_polled_dev in polling drivers Andy Shevchenko
2019-10-21 8:03 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191017204217.106453-6-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=Anson.Huang@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=allison@lohutok.net \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=ping.bai@nxp.com \
--cc=ronald@innovation.ch \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).