linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sven Van Asbroeck <thesven73@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Marek Vasut <marex@denx.de>, Adam Ford <aford173@gmail.com>,
	linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH v1 1/3] Input: ili210x - do not retrieve/print chip firmware version
Date: Tue, 12 Nov 2019 11:44:27 -0500	[thread overview]
Message-ID: <20191112164429.11225-1-TheSven73@gmail.com> (raw)

The driver's method to retrieve the firmware version on ili2117/
ili2118 chip flavours is incorrect. The firmware version register
address and layout are wrong.

The firmware version is not actually used anywhere inside or
outside this driver. There is a dev_dbg() print, but that is
only visible when the developer explicitly compiles in debug
support.

Don't make the code more complicated to preserve a feature that
no-one is using. Remove all code associated with chip firmware
version.

Link: https://lore.kernel.org/lkml/20191111181657.GA57214@dtor-ws/
Cc: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: <linux-kernel@vger.kernel.org>
Cc: linux-input@vger.kernel.org
Tree: https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/log/?h=next
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
---
 drivers/input/touchscreen/ili210x.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index 0ed6014af6d7..a6feae5ce887 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -21,15 +21,8 @@
 /* Touchscreen commands */
 #define REG_TOUCHDATA		0x10
 #define REG_PANEL_INFO		0x20
-#define REG_FIRMWARE_VERSION	0x40
 #define REG_CALIBRATE		0xcc
 
-struct firmware_version {
-	u8 id;
-	u8 major;
-	u8 minor;
-} __packed;
-
 struct ili2xxx_chip {
 	int (*read_reg)(struct i2c_client *client, u8 reg,
 			void *buf, size_t len);
@@ -342,7 +335,6 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 	struct ili210x *priv;
 	struct gpio_desc *reset_gpio;
 	struct input_dev *input;
-	struct firmware_version firmware;
 	int error;
 
 	dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
@@ -389,15 +381,6 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 	priv->chip = chip;
 	i2c_set_clientdata(client, priv);
 
-	/* Get firmware version */
-	error = chip->read_reg(client, REG_FIRMWARE_VERSION,
-			       &firmware, sizeof(firmware));
-	if (error) {
-		dev_err(dev, "Failed to get firmware version, err: %d\n",
-			error);
-		return error;
-	}
-
 	/* Setup input device */
 	input->name = "ILI210x Touchscreen";
 	input->id.bustype = BUS_I2C;
@@ -439,10 +422,6 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 		return error;
 	}
 
-	dev_dbg(dev,
-		"ILI210x initialized (IRQ: %d), firmware version %d.%d.%d",
-		client->irq, firmware.id, firmware.major, firmware.minor);
-
 	return 0;
 }
 
-- 
2.17.1


             reply	other threads:[~2019-11-12 16:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-12 16:44 Sven Van Asbroeck [this message]
2019-11-12 16:44 ` [PATCH v1 2/3] Input: ili210x - add resolution to chip operations structure Sven Van Asbroeck
2019-11-12 19:42   ` Dmitry Torokhov
2019-11-12 16:44 ` [PATCH v1 3/3] Input: ili210x - optionally hide calibrate sysfs attribute Sven Van Asbroeck
2019-11-12 19:38   ` Dmitry Torokhov
2019-11-12 23:34 ` [PATCH v1 1/3] Input: ili210x - do not retrieve/print chip firmware version Sebastian Reichel
2019-11-13  0:06   ` Dmitry Torokhov
2019-11-12 23:53 ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191112164429.11225-1-TheSven73@gmail.com \
    --to=thesven73@gmail.com \
    --cc=aford173@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).