[PATCH AUTOSEL 4.14 04/58] Input: atmel_mxt_ts - disable IRQ across suspend

[PATCH AUTOSEL 4.14 04/58] Input: atmel_mxt_ts - disable IRQ across suspend

[Sasha Levin]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ]

Across suspend and resume, we are seeing error messages like the following:

atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)

This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.

Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.

Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 59aaac43db91f..138d1f3b12b2e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3257,6 +3257,8 @@ static int __maybe_unused mxt_suspend(struct device *dev)
 
 	mutex_unlock(&input_dev->mutex);
 
+	disable_irq(data->irq);
+
 	return 0;
 }
 
@@ -3269,6 +3271,8 @@ static int __maybe_unused mxt_resume(struct device *dev)
 	if (!input_dev)
 		return 0;
 
+	enable_irq(data->irq);
+
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)
-- 
2.20.1

[PATCH AUTOSEL 4.14 34/58] HID: logitech-hidpp: Silence intermittent get_battery_capacity errors

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 61005d65b6c7dcf61c19516e6ebe5acc02d2cdda ]

My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing
intermittent errors like these in the log:

[11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09

We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
errors in other places, lets do the same in
hidpp20_batterylevel_get_battery_capacity to remove these harmless,
but scary looking errors from the dmesg output.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 4706fb852eafb..6ad776b4711b7 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -978,6 +978,9 @@ static int hidpp20_batterylevel_get_battery_capacity(struct hidpp_device *hidpp,
 	ret = hidpp_send_fap_command_sync(hidpp, feature_index,
 					  CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_LEVEL_STATUS,
 					  NULL, 0, &response);
+	/* Ignore these intermittent errors */
+	if (ret == HIDPP_ERROR_RESOURCE_ERROR)
+		return -EIO;
 	if (ret > 0) {
 		hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
 			__func__, ret);
-- 
2.20.1

[PATCH AUTOSEL 4.14 36/58] HID: Improve Windows Precision Touchpad detection.

[Sasha Levin]

From: Blaž Hrastnik <blaz@mxxn.io>

[ Upstream commit 2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]

Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing
data used to verify the touchpad as a Windows Precision Touchpad.

   0x85, REPORTID_PTPHQA,    //    REPORT_ID (PTPHQA)
    0x09, 0xC5,              //    USAGE (Vendor Usage 0xC5)
    0x15, 0x00,              //    LOGICAL_MINIMUM (0)
    0x26, 0xff, 0x00,        //    LOGICAL_MAXIMUM (0xff)
    0x75, 0x08,              //    REPORT_SIZE (8)
    0x96, 0x00, 0x01,        //    REPORT_COUNT (0x100 (256))
    0xb1, 0x02,              //    FEATURE (Data,Var,Abs)

However, some devices, namely Microsoft's Surface line of products
instead implement a "segmented device certification report" (usage 0xC6)
which returns the same report, but in smaller chunks.

    0x06, 0x00, 0xff,        //     USAGE_PAGE (Vendor Defined)
    0x85, REPORTID_PTPHQA,   //     REPORT_ID (PTPHQA)
    0x09, 0xC6,              //     USAGE (Vendor usage for segment #)
    0x25, 0x08,              //     LOGICAL_MAXIMUM (8)
    0x75, 0x08,              //     REPORT_SIZE (8)
    0x95, 0x01,              //     REPORT_COUNT (1)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)
    0x09, 0xC7,              //     USAGE (Vendor Usage)
    0x26, 0xff, 0x00,        //     LOGICAL_MAXIMUM (0xff)
    0x95, 0x20,              //     REPORT_COUNT (32)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)

By expanding Win8 touchpad detection to also look for the segmented
report, all Surface touchpads are now properly recognized by
hid-multitouch.

Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 0c547bf841f40..6a04b56d161b4 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -760,6 +760,10 @@ static void hid_scan_feature_usage(struct hid_parser *parser, u32 usage)
 	if (usage == 0xff0000c5 && parser->global.report_count == 256 &&
 	    parser->global.report_size == 8)
 		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
+
+	if (usage == 0xff0000c6 && parser->global.report_count == 1 &&
+	    parser->global.report_size == 8)
+		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
 }
 
 static void hid_scan_collection(struct hid_parser *parser, unsigned type)
-- 
2.20.1