Re: [PATCH V2 1/2] Documentation: devicetree: bindings: input

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

Hi Fengping,

On Wed, Jan 08, 2020 at 02:29:22PM +0800, fengping yu wrote:
> From: "fengping.yu" <fengping.yu@mediatek.com>
> 
> Add mtk keypad device tree documentation.
> 
> Change-Id: I415b76ee980784992763c768829b2dda76699dea
> Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
> ---
>  .../devicetree/bindings/input/mtk-kpd.txt     | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.txt b/Documentation/devicetree/bindings/input/mtk-kpd.txt
> new file mode 100644
> index 000000000000..2af81e696159
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/mtk-kpd.txt
> @@ -0,0 +1,45 @@
> +* Mediatek's Keypad Controller device tree binding
> +
> +Mediatek's Keypad controller is used to interface a SoC with a matrix-type
> +keypad device. The keypad controller supports multiple row and column lines.
> +A key can be placed at each intersection of a unique row and a unique column.
> +The keypad controller can sense a key-press and key-release and report the
> +event using a interrupt to the cpu.
> +
> +Required properties:
> +- compatible should contain:
> +	* "mediatek,mt6779-keypad" for MT6779 keypad
> +	* "mediatek,kp" for common keypad
> +
> +- reg: The base address of the Keypad register bank.
> +
> +- interrupts: A single interrupt specifier.
> +
> +- mediatek,key-debounce-ms: Debounce interval in milliseconds, maximum value
> +  is 256ms
> +
> +- mediatek,hw-map-num: Number of entries of keycode in mediatek,hw-init-map
> +
> +- mediatek,hw-init-map: An array of packed 1-cell entries containing the
> +  equivalent of hw-map-num linux key-code. Each cell is Linux keymap of
> +  corresponding row/col, arrange like this:
> +
> +  row0col0, row0col1, row0col2,...row0col8,
> +  row1col0, row1col1, row1col2,...row1col8,
> +  ...
> +  row7col0, row7col1, row7col2,...row7col8.

Please use standard "linux,keymap" property as defined in
Documentation/devicetree/bindings/input/matrix-keymap.txt. You can use
API from drivers/input/matrix-keymap.c to handle the property.

Thanks.

-- 
Dmitry