[PATCH AUTOSEL 5.4 023/266] Input: edt-ft5x06 - fix get_default register write access

[PATCH AUTOSEL 5.4 023/266] Input: edt-ft5x06 - fix get_default register write access

[Sasha Levin]

From: Marco Felsch <m.felsch@pengutronix.de>

[ Upstream commit 255cdaf73412de13608fb776101402dca68bed2b ]

Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for
ev-ft5726") offset-x and offset-y is supported. Devices using those
offset parameters don't support the offset parameter so we need to add
the NO_REGISTER check for edt_ft5x06_ts_get_defaults().

Fixes: b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/edt-ft5x06.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 240e8de24cd2..b41b97c962ed 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -935,19 +935,25 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
 
 	error = device_property_read_u32(dev, "offset", &val);
 	if (!error) {
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val);
+		if (reg_addr->reg_offset != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset, val);
 		tsdata->offset = val;
 	}
 
 	error = device_property_read_u32(dev, "offset-x", &val);
 	if (!error) {
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val);
+		if (reg_addr->reg_offset_x != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset_x, val);
 		tsdata->offset_x = val;
 	}
 
 	error = device_property_read_u32(dev, "offset-y", &val);
 	if (!error) {
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val);
+		if (reg_addr->reg_offset_y != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset_y, val);
 		tsdata->offset_y = val;
 	}
 }
-- 
2.25.1

[PATCH AUTOSEL 5.4 103/266] Input: mms114 - add extra compatible for mms345l

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 7842087b0196d674ed877d768de8f2a34d7fdc53 ]

MMS345L is another first generation touch screen from Melfas,
which uses mostly the same registers as MMS152.

However, there is some garbage printed during initialization.
Apparently MMS345L does not have the MMS152_COMPAT_GROUP register
that is read+printed during initialization.

  TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06

On earlier kernel versions the compat group was actually printed as
an ASCII control character, seems like it gets escaped now.

But we probably shouldn't print something from a random register.

Add a separate "melfas,mms345l" compatible that avoids reading
from the MMS152_COMPAT_GROUP register. This might also help in case
there is some other device-specific quirk in the future.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/mms114.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index fca908ba4841..fb28fd2d6f1c 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -54,6 +54,7 @@
 enum mms_type {
 	TYPE_MMS114	= 114,
 	TYPE_MMS152	= 152,
+	TYPE_MMS345L	= 345,
 };
 
 struct mms114_data {
@@ -250,6 +251,15 @@ static int mms114_get_version(struct mms114_data *data)
 	int error;
 
 	switch (data->type) {
+	case TYPE_MMS345L:
+		error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
+		if (error)
+			return error;
+
+		dev_info(dev, "TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x\n",
+			 buf[0], buf[1], buf[2]);
+		break;
+
 	case TYPE_MMS152:
 		error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
 		if (error)
@@ -287,8 +297,8 @@ static int mms114_setup_regs(struct mms114_data *data)
 	if (error < 0)
 		return error;
 
-	/* MMS152 has no configuration or power on registers */
-	if (data->type == TYPE_MMS152)
+	/* Only MMS114 has configuration and power on registers */
+	if (data->type != TYPE_MMS114)
 		return 0;
 
 	error = mms114_set_active(data, true);
@@ -598,6 +608,9 @@ static const struct of_device_id mms114_dt_match[] = {
 	}, {
 		.compatible = "melfas,mms152",
 		.data = (void *)TYPE_MMS152,
+	}, {
+		.compatible = "melfas,mms345l",
+		.data = (void *)TYPE_MMS345L,
 	},
 	{ }
 };
-- 
2.25.1

[PATCH AUTOSEL 5.4 115/266] HID: intel-ish-hid: avoid bogus uninitialized-variable warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 0b66fb3e6b7a53688f8e20945ac78cd3d832c65f ]

Older compilers like gcc-4.8 don't see that the variable is
initialized when it is used:

In file included from include/linux/compiler_types.h:68:0,
                 from <command-line>:0:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host':
include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
 #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
                                             ^
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here
  struct shim_fw_info fw_info;
                      ^

Make sure to initialize it before returning an error from ish_query_loader_prop().

Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
index aa2dbed30fc3..6cf59fd26ad7 100644
--- a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
+++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
@@ -480,6 +480,7 @@ static int ish_query_loader_prop(struct ishtp_cl_data *client_data,
 			    sizeof(ldr_xfer_query_resp));
 	if (rv < 0) {
 		client_data->flag_retry = true;
+		*fw_info = (struct shim_fw_info){};
 		return rv;
 	}
 
@@ -489,6 +490,7 @@ static int ish_query_loader_prop(struct ishtp_cl_data *client_data,
 			"data size %d is not equal to size of loader_xfer_query_response %zu\n",
 			rv, sizeof(struct loader_xfer_query_response));
 		client_data->flag_retry = true;
+		*fw_info = (struct shim_fw_info){};
 		return -EMSGSIZE;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 146/266] HID: Add quirks for Trust Panora Graphic Tablet

[Sasha Levin]

From: Cristian Klein <cristian.klein@elastisys.com>

[ Upstream commit fb68ada81e65d593b51544fa43c284322107a742 ]

The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen
movement, pen pressure and pen buttons. Interface one reports tablet buttons
and tablet scroll. Both use the mouse protocol.

Without these quirks, libinput gets confused about what device it talks to.

For completeness, here is the usbhid-dump:

```
$ sudo usbhid-dump -d 145f:0212
003:013:001:DESCRIPTOR         1588949402.559961
 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07
 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52
 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36
 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20
 75 01 81 02 C0

003:013:000:DESCRIPTOR         1588949402.563942
 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01
 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01
 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08
 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01
 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01
 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95
 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10
 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF
 00 09 00 75 08 95 07 B1 02 C0 C0
```

Signed-off-by: Cristian Klein <cristian.klein@elastisys.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 3 +++
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 13b7222ef2c9..c552a6bc627e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1147,6 +1147,9 @@
 #define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882	0x8882
 #define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883	0x8883
 
+#define USB_VENDOR_ID_TRUST             0x145f
+#define USB_DEVICE_ID_TRUST_PANORA_TABLET   0x0212
+
 #define USB_VENDOR_ID_TURBOX		0x062a
 #define USB_DEVICE_ID_TURBOX_KEYBOARD	0x0201
 #define USB_DEVICE_ID_ASUS_MD_5110	0x5110
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 90ec2390ef68..168fdaa1999f 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -168,6 +168,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883), HID_QUIRK_NOGET },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_TRUST, USB_DEVICE_ID_TRUST_PANORA_TABLET), HID_QUIRK_MULTI_INPUT | HID_QUIRK_HIDINPUT_FORCE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60), HID_QUIRK_MULTI_INPUT },
-- 
2.25.1

[PATCH AUTOSEL 5.4 206/266] input: i8042 - Remove special PowerPC handling

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit e4f4ffa8a98c24a4ab482669b1e2b4cfce3f52f4 ]

This causes a build error with CONFIG_WALNUT because kb_cs and kb_data
were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and
include/asm-ppc").

ld.lld: error: undefined symbol: kb_cs
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a

ld.lld: error: undefined symbol: kb_data
> referenced by i8042.c:309 (drivers/input/serio/i8042.c:309)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042.c:319 (drivers/input/serio/i8042.c:319)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced 15 more times

Presumably since nobody has noticed this for the last 12 years, there is
not anyone actually trying to use this driver so we can just remove this
special walnut code and use the generic header so it builds for all
configurations.

Fixes: 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-ppcio.h | 57 -------------------------------
 drivers/input/serio/i8042.h       |  2 --
 2 files changed, 59 deletions(-)
 delete mode 100644 drivers/input/serio/i8042-ppcio.h

diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h
deleted file mode 100644
index 391f94d9e47d..000000000000
--- a/drivers/input/serio/i8042-ppcio.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef _I8042_PPCIO_H
-#define _I8042_PPCIO_H
-
-
-#if defined(CONFIG_WALNUT)
-
-#define I8042_KBD_IRQ 25
-#define I8042_AUX_IRQ 26
-
-#define I8042_KBD_PHYS_DESC "walnutps2/serio0"
-#define I8042_AUX_PHYS_DESC "walnutps2/serio1"
-#define I8042_MUX_PHYS_DESC "walnutps2/serio%d"
-
-extern void *kb_cs;
-extern void *kb_data;
-
-#define I8042_COMMAND_REG (*(int *)kb_cs)
-#define I8042_DATA_REG (*(int *)kb_data)
-
-static inline int i8042_read_data(void)
-{
-	return readb(kb_data);
-}
-
-static inline int i8042_read_status(void)
-{
-	return readb(kb_cs);
-}
-
-static inline void i8042_write_data(int val)
-{
-	writeb(val, kb_data);
-}
-
-static inline void i8042_write_command(int val)
-{
-	writeb(val, kb_cs);
-}
-
-static inline int i8042_platform_init(void)
-{
-	i8042_reset = I8042_RESET_ALWAYS;
-	return 0;
-}
-
-static inline void i8042_platform_exit(void)
-{
-}
-
-#else
-
-#include "i8042-io.h"
-
-#endif
-
-#endif /* _I8042_PPCIO_H */
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index 38dc27ad3c18..eb376700dfff 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -17,8 +17,6 @@
 #include "i8042-ip22io.h"
 #elif defined(CONFIG_SNI_RM)
 #include "i8042-snirm.h"
-#elif defined(CONFIG_PPC)
-#include "i8042-ppcio.h"
 #elif defined(CONFIG_SPARC)
 #include "i8042-sparcio.h"
 #elif defined(CONFIG_X86) || defined(CONFIG_IA64)
-- 
2.25.1