From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [git pull] Input updates for v5.10-rc0
Date: Thu, 22 Oct 2020 21:54:21 -0700 [thread overview]
Message-ID: <20201023045421.GA2205724@dtor-ws> (raw)
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git for-linus
to receive updates for the input subsystem. You will get:
- a new driver for ADC driven joysticks
- a new Zintix touchscreen driver
- enhancements to Intel SoC button array driver
- support for F3A "function" in Synaptics RMI4 driver
- assorted driver fixups
Changelog:
---------
Artur Rojek (2):
dt-bindings: input: Add docs for ADC driven joystick
Input: joystick - add ADC attached joystick driver.
Dan Carpenter (1):
Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
Dmitry Torokhov (1):
Input: imx6ul_tsc - unify open/close and PM paths
Furquan Shaikh (1):
Input: raydium_i2c_ts - use single i2c_transfer transaction when using RM_CMD_BANK_SWITCH
Hans de Goede (8):
Input: allocate keycodes for notification-center, pickup-phone and hangup-phone
Input: allocate keycode for Fn + right shift
platform/x86: thinkpad_acpi: Add support for new hotkeys found on X1C8 / T14
platform/x86: thinkpad_acpi: Map Clipping tool hotkey to KEY_SELECTIVE_SCREENSHOT
Input: soc_button_array - add active_low setting to soc_button_info
Input: soc_button_array - add support for INT33D3 tablet-mode switch devices
Input: soc_button_array - work around DSDTs which modify the irqflags
Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1
Jason A. Donenfeld (2):
Input: synaptics-rmi4 - support bootloader v8 in f34v7
Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2
Joe Perches (1):
Input: MT - avoid comma separated statements
Johnny Chuang (2):
Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information.
Input: elants_i2c - fix typo for an attribute to show calibration count
Kenny Levinsen (1):
Input: evdev - per-client waitgroups
Krzysztof Kozlowski (4):
Input: ep93xx_keypad - fix handling of platform_get_irq() error
Input: omap4-keypad - fix handling of platform_get_irq() error
Input: twl4030_keypad - fix handling of platform_get_irq() error
Input: sun4i-ps2 - fix handling of platform_get_irq() error
Michael Srba (2):
dt-bindings: input/touchscreen: add bindings for zinitix
Input: add zinitix touchscreen driver
Mika Penttilä (1):
Input: Add MAINTAINERS entry for SiS i2c touch input driver
Vincent Huang (2):
Input: synaptics-rmi4 - rename f30_data to gpio_data
Input: synaptics-rmi4 - add support for F3A
YueHaibing (1):
Input: stmfts - fix a & vs && typo
Diffstat:
--------
.../devicetree/bindings/input/adc-joystick.yaml | 121 +++++
.../bindings/input/touchscreen/zinitix.txt | 40 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 7 +
drivers/hid/hid-rmi.c | 2 +-
drivers/input/evdev.c | 19 +-
drivers/input/input-mt.c | 11 +-
drivers/input/joystick/Kconfig | 10 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/adc-joystick.c | 264 ++++++++++
drivers/input/keyboard/ep93xx_keypad.c | 4 +-
drivers/input/keyboard/omap4-keypad.c | 6 +-
drivers/input/keyboard/twl4030_keypad.c | 8 +-
drivers/input/misc/soc_button_array.c | 100 +++-
drivers/input/mouse/synaptics.c | 6 +-
drivers/input/rmi4/Kconfig | 8 +
drivers/input/rmi4/Makefile | 1 +
drivers/input/rmi4/rmi_bus.c | 3 +
drivers/input/rmi4/rmi_driver.h | 1 +
drivers/input/rmi4/rmi_f30.c | 14 +-
drivers/input/rmi4/rmi_f34v7.c | 9 +-
drivers/input/rmi4/rmi_f3a.c | 241 +++++++++
drivers/input/serio/sun4i-ps2.c | 9 +-
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/elants_i2c.c | 8 +-
drivers/input/touchscreen/imx6ul_tsc.c | 47 +-
drivers/input/touchscreen/raydium_i2c_ts.c | 131 ++---
drivers/input/touchscreen/stmfts.c | 2 +-
drivers/input/touchscreen/zinitix.c | 581 +++++++++++++++++++++
drivers/platform/x86/thinkpad_acpi.c | 18 +-
include/linux/rmi.h | 11 +-
include/uapi/linux/input-event-codes.h | 4 +
33 files changed, 1531 insertions(+), 171 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
create mode 100644 drivers/input/joystick/adc-joystick.c
create mode 100644 drivers/input/rmi4/rmi_f3a.c
create mode 100644 drivers/input/touchscreen/zinitix.c
Thanks.
--
Dmitry
next reply other threads:[~2020-10-23 4:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-23 4:54 Dmitry Torokhov [this message]
2020-10-23 23:42 ` [git pull] Input updates for v5.10-rc0 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201023045421.GA2205724@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).