From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: David Jander <david@protonic.nl>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org
Subject: Re: [PATCH v2] Input: touchscreen: ads7846.c: Fix race that causes missing releases
Date: Mon, 9 Nov 2020 12:00:28 +0100 [thread overview]
Message-ID: <20201109110028.atbas5gcmgthaufy@pengutronix.de> (raw)
In-Reply-To: <20201027105416.18773-1-o.rempel@pengutronix.de>
Hello Dmitry,
ping for this patch. Are there some changes needed?
Regards,
Oleksij
On Tue, Oct 27, 2020 at 11:54:16AM +0100, Oleksij Rempel wrote:
> From: David Jander <david@protonic.nl>
>
> If touchscreen is released while busy reading HWMON device, the release
> can be missed. The IRQ thread is not started because no touch is active
> and BTN_TOUCH release event is never sent.
>
> Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon")
> Co-Developed-by: David Jander <david@protonic.nl>
> Signed-off-by: David Jander <david@protonic.nl>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/input/touchscreen/ads7846.c | 44 +++++++++++++++++------------
> 1 file changed, 26 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index f2dc2c8ab5ec..4164a9834b59 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -199,6 +199,26 @@ struct ads7846 {
> #define REF_ON (READ_12BIT_DFR(x, 1, 1))
> #define REF_OFF (READ_12BIT_DFR(y, 0, 0))
>
> +static int get_pendown_state(struct ads7846 *ts)
> +{
> + if (ts->get_pendown_state)
> + return ts->get_pendown_state();
> +
> + return !gpio_get_value(ts->gpio_pendown);
> +}
> +
> +static void ads7846_report_pen_up(struct ads7846 *ts)
> +{
> + struct input_dev *input = ts->input;
> +
> + input_report_key(input, BTN_TOUCH, 0);
> + input_report_abs(input, ABS_PRESSURE, 0);
> + input_sync(input);
> +
> + ts->pendown = false;
> + dev_vdbg(&ts->spi->dev, "UP\n");
> +}
> +
> /* Must be called with ts->lock held */
> static void ads7846_stop(struct ads7846 *ts)
> {
> @@ -215,6 +235,10 @@ static void ads7846_stop(struct ads7846 *ts)
> static void ads7846_restart(struct ads7846 *ts)
> {
> if (!ts->disabled && !ts->suspended) {
> + /* Check if pen was released since last stop */
> + if (ts->pendown && !get_pendown_state(ts))
> + ads7846_report_pen_up(ts);
> +
> /* Tell IRQ thread that it may poll the device. */
> ts->stopped = false;
> mb();
> @@ -606,14 +630,6 @@ static const struct attribute_group ads784x_attr_group = {
>
> /*--------------------------------------------------------------------------*/
>
> -static int get_pendown_state(struct ads7846 *ts)
> -{
> - if (ts->get_pendown_state)
> - return ts->get_pendown_state();
> -
> - return !gpio_get_value(ts->gpio_pendown);
> -}
> -
> static void null_wait_for_sync(void)
> {
> }
> @@ -868,16 +884,8 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
> msecs_to_jiffies(TS_POLL_PERIOD));
> }
>
> - if (ts->pendown && !ts->stopped) {
> - struct input_dev *input = ts->input;
> -
> - input_report_key(input, BTN_TOUCH, 0);
> - input_report_abs(input, ABS_PRESSURE, 0);
> - input_sync(input);
> -
> - ts->pendown = false;
> - dev_vdbg(&ts->spi->dev, "UP\n");
> - }
> + if (ts->pendown && !ts->stopped)
> + ads7846_report_pen_up(ts);
>
> return IRQ_HANDLED;
> }
> --
> 2.28.0
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2020-11-09 11:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 10:54 [PATCH v2] Input: touchscreen: ads7846.c: Fix race that causes missing releases Oleksij Rempel
2020-11-09 11:00 ` Oleksij Rempel [this message]
2020-11-11 19:07 ` Dmitry Torokhov
2020-11-12 11:48 ` Oleksij Rempel
2020-11-18 0:31 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201109110028.atbas5gcmgthaufy@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=alexandru.ardelean@analog.com \
--cc=david@protonic.nl \
--cc=dmitry.torokhov@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).