* [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected [not found] <20210127172500.13356-1-andre.przywara@arm.com> @ 2021-01-27 17:24 ` Andre Przywara 2021-01-27 19:42 ` Dmitry Torokhov 0 siblings, 1 reply; 6+ messages in thread From: Andre Przywara @ 2021-01-27 17:24 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai Cc: Jernej Skrabec, Samuel Holland, Icenowy Zheng, Rob Herring, Clément Péron, Shuosheng Huang, Yangtao Li, linux-arm-kernel, linux-kernel, linux-sunxi, Lee Jones, Dmitry Torokhov, linux-input On at least one board (Orangepi Zero2) the AXP305 PMIC does not have its interrupt line connected to the CPU (mostly because the H616 SoC does not feature an NMI pin anymore). After allowing the AXP driver to proceed without an "interrupts" property [1], the axp20x-pek driver crashes with a NULL pointer dereference (see below). Check for the regmap_irqc member to be not NULL before proceeding with probe. This gets normally filled by the call to regmap_add_irq_chip(), which we allow to skip now, when the DT node lacks an interrupt property. .... [ 3.843388] sunxi-rsb 7083000.rsb: RSB running at 3000000 Hz [ 3.849972] axp20x-rsb sunxi-rsb-745: AXP20x variant AXP806 found [ 3.857971] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001b8 [ 3.866855] Mem abort info: [ 3.869691] ESR = 0x96000004 [ 3.872749] EC = 0x25: DABT (current EL), IL = 32 bits [ 3.878092] SET = 0, FnV = 0 [ 3.881149] EA = 0, S1PTW = 0 [ 3.884309] Data abort info: [ 3.887210] ISV = 0, ISS = 0x00000004 [ 3.891062] CM = 0, WnR = 0 [ 3.894049] [00000000000001b8] user address but active_mm is swapper [ 3.900590] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 3.906166] Modules linked in: [ 3.909227] CPU: 2 PID: 34 Comm: kworker/2:1 Not tainted 5.11.0-rc1 [ 3.915925] Hardware name: OrangePi Zero2 (DT) [ 3.920367] Workqueue: events deferred_probe_work_func [ 3.925518] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 3.931522] pc : regmap_irq_get_virq+0x0/0x48 [ 3.935883] lr : axp20x_pek_probe+0x78/0x200 [ 3.940147] sp : ffff800012fdb450 [ 3.943459] x29: ffff800012fdb450 x28: ffff0000054af340 [ 3.948776] x27: ffff000005534000 x26: ffff000005534810 [ 3.954091] x25: ffff800012883028 x24: 0000000000000002 [ 3.959407] x23: ffff80001157eaf0 x22: ffff000005534810 [ 3.964722] x21: ffff000005534800 x20: ffff0000054b0580 [ 3.970037] x19: 000000000000000b x18: 0000000000000000 [ 3.975353] x17: 0000000000000001 x16: 0000000000000019 [ 3.980668] x15: 000002ce4ea04ae6 x14: 000000000000014f [ 3.985983] x13: 0000000000000282 x12: 0000000000000030 [ 3.991298] x11: 0000000000000038 x10: 0101010101010101 [ 3.996613] x9 : 0000000000000000 x8 : 7f7f7f7f7f7f7f7f [ 4.001928] x7 : ff5141435e4a444f x6 : 0000000000000080 [ 4.007243] x5 : 0000000000000000 x4 : 8000000000000000 [ 4.012558] x3 : 0000000000000000 x2 : 0000000000000000 [ 4.017872] x1 : 000000000000000b x0 : 0000000000000000 [ 4.023188] Call trace: [ 4.025635] regmap_irq_get_virq+0x0/0x48 [ 4.029646] platform_probe+0x68/0xd8 [ 4.033312] really_probe+0xe4/0x3b0 [ 4.036889] driver_probe_device+0x58/0xb8 [ 4.040986] __device_attach_driver+0x84/0xc8 [ 4.045342] bus_for_each_drv+0x78/0xc8 [ 4.049178] __device_attach+0xf0/0x150 [ 4.053013] device_initial_probe+0x14/0x20 [ 4.057196] bus_probe_device+0x9c/0xa8 [ 4.061032] device_add+0x36c/0x7b8 [ 4.064525] platform_device_add+0x100/0x238 [ 4.068796] mfd_add_devices+0x494/0x718 [ 4.072721] axp20x_device_probe+0x70/0x158 [ 4.076904] axp20x_rsb_probe+0x94/0xd0 [ 4.080741] sunxi_rsb_device_probe+0x6c/0x88 [ 4.085102] really_probe+0xe4/0x3b0 [ 4.088679] driver_probe_device+0x58/0xb8 [ 4.092776] __device_attach_driver+0x84/0xc8 [ 4.097132] bus_for_each_drv+0x78/0xc8 [ 4.100967] __device_attach+0xf0/0x150 [ 4.104803] device_initial_probe+0x14/0x20 [ 4.108986] bus_probe_device+0x9c/0xa8 [ 4.112821] device_add+0x36c/0x7b8 [ 4.116313] device_register+0x20/0x30 [ 4.120065] sunxi_rsb_probe+0x4e4/0x608 .... [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/633392.html Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/input/misc/axp20x-pek.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index 9c6386b2af33..abe52ef194ee 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -309,6 +309,10 @@ static int axp20x_pek_probe(struct platform_device *pdev) axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); + /* In case there is no interrupt line from the AXP towards the CPU. */ + if (!axp20x_pek->axp20x->regmap_irqc) + return -ENODEV; + axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); if (axp20x_pek->irq_dbr < 0) return axp20x_pek->irq_dbr; -- 2.17.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected 2021-01-27 17:24 ` [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected Andre Przywara @ 2021-01-27 19:42 ` Dmitry Torokhov 2021-01-28 11:11 ` Andre Przywara 0 siblings, 1 reply; 6+ messages in thread From: Dmitry Torokhov @ 2021-01-27 19:42 UTC (permalink / raw) To: Andre Przywara Cc: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Icenowy Zheng, Rob Herring, Clément Péron, Shuosheng Huang, Yangtao Li, linux-arm-kernel, linux-kernel, linux-sunxi, Lee Jones, linux-input Hi Andre, On Wed, Jan 27, 2021 at 05:24:45PM +0000, Andre Przywara wrote: > On at least one board (Orangepi Zero2) the AXP305 PMIC does not have its > interrupt line connected to the CPU (mostly because the H616 SoC does > not feature an NMI pin anymore). > After allowing the AXP driver to proceed without an "interrupts" > property [1], the axp20x-pek driver crashes with a NULL pointer > dereference (see below). > > Check for the regmap_irqc member to be not NULL before proceeding with > probe. This gets normally filled by the call to regmap_add_irq_chip(), > which we allow to skip now, when the DT node lacks an interrupt > property. No, the driver is not the right place to patch this; regmap should be fixed so it does not crash instead. Thanks. -- Dmitry ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected 2021-01-27 19:42 ` Dmitry Torokhov @ 2021-01-28 11:11 ` Andre Przywara 2021-01-28 11:36 ` Mark Brown 0 siblings, 1 reply; 6+ messages in thread From: Andre Przywara @ 2021-01-28 11:11 UTC (permalink / raw) To: Dmitry Torokhov Cc: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Icenowy Zheng, Rob Herring, Clément Péron, Shuosheng Huang, Yangtao Li, linux-arm-kernel, linux-kernel, linux-sunxi, Lee Jones, linux-input, Mark Brown On Wed, 27 Jan 2021 11:42:15 -0800 Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: Hi Dmitry, thanks for your feedback! > On Wed, Jan 27, 2021 at 05:24:45PM +0000, Andre Przywara wrote: > > On at least one board (Orangepi Zero2) the AXP305 PMIC does not have its > > interrupt line connected to the CPU (mostly because the H616 SoC does > > not feature an NMI pin anymore). > > After allowing the AXP driver to proceed without an "interrupts" > > property [1], the axp20x-pek driver crashes with a NULL pointer > > dereference (see below). > > > > Check for the regmap_irqc member to be not NULL before proceeding with > > probe. This gets normally filled by the call to regmap_add_irq_chip(), > > which we allow to skip now, when the DT node lacks an interrupt > > property. > > No, the driver is not the right place to patch this; regmap should be > fixed so it does not crash instead. I am not sure this is the right approach, those regmap functions look more like an internal interface to me, with lots of wrapper functions happily dereferencing pointers and reaching into structs. Moving NULL checks into those does not sound like the right thing. CC:ing Mark for more opinions on this. A more general solution would be to not instantiate this driver here at all, when we don't have an interrupt line. However at the moment the AXP MFD driver uses a const struct to hold all MFD cells, so there is no easy way of omitting the power key device dynamically. And even then it would hard code the requirement for an interrupt into the MFD driver, when this could be considered an implementation detail of the axp20x-pek driver. That's why I came up with this patch here, which was the easiest and cleanest: This driver *requires* a valid regmap_irqc, so it should verify this at probe time, kind of like a normal driver would bail out if no IRQ line could be reserved. Let me know what you think! Cheers, Andre ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected 2021-01-28 11:11 ` Andre Przywara @ 2021-01-28 11:36 ` Mark Brown 2021-01-28 12:31 ` Andre Przywara 0 siblings, 1 reply; 6+ messages in thread From: Mark Brown @ 2021-01-28 11:36 UTC (permalink / raw) To: Andre Przywara Cc: Dmitry Torokhov, Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Icenowy Zheng, Rob Herring, Clément Péron, Shuosheng Huang, Yangtao Li, linux-arm-kernel, linux-kernel, linux-sunxi, Lee Jones, linux-input [-- Attachment #1: Type: text/plain, Size: 1834 bytes --] On Thu, Jan 28, 2021 at 11:11:28AM +0000, Andre Przywara wrote: > Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > > On Wed, Jan 27, 2021 at 05:24:45PM +0000, Andre Przywara wrote: > > > Check for the regmap_irqc member to be not NULL before proceeding with > > > probe. This gets normally filled by the call to regmap_add_irq_chip(), > > > which we allow to skip now, when the DT node lacks an interrupt > > > property. It sounds like you're trying to register an IRQ chip with a somehow bogus configuration? > > No, the driver is not the right place to patch this; regmap should be > > fixed so it does not crash instead. > I am not sure this is the right approach, those regmap functions look > more like an internal interface to me, with lots of wrapper functions > happily dereferencing pointers and reaching into structs. Moving > NULL checks into those does not sound like the right thing. CC:ing Mark > for more opinions on this. Without having seen the actual issue if you're trying to register an interrupt controller with a known broken hardware configuration that does seem like something the caller just shouldn't be doing, it's not something that's going to transiently happen at runtime and we're very much trusting that the caller got things right. > A more general solution would be to not instantiate this driver here > at all, when we don't have an interrupt line. > However at the moment the AXP MFD driver uses a const struct to hold > all MFD cells, so there is no easy way of omitting the power key > device dynamically. And even then it would hard code the requirement > for an interrupt into the MFD driver, when this could be considered an > implementation detail of the axp20x-pek driver. Another approach is to just register the optional device separately. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected 2021-01-28 11:36 ` Mark Brown @ 2021-01-28 12:31 ` Andre Przywara 2021-01-28 15:05 ` Mark Brown 0 siblings, 1 reply; 6+ messages in thread From: Andre Przywara @ 2021-01-28 12:31 UTC (permalink / raw) To: Mark Brown Cc: Dmitry Torokhov, Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Icenowy Zheng, Rob Herring, Clément Péron, Shuosheng Huang, Yangtao Li, linux-arm-kernel, linux-kernel, linux-sunxi, Lee Jones, linux-input On Thu, 28 Jan 2021 11:36:01 +0000 Mark Brown <broonie@kernel.org> wrote: > On Thu, Jan 28, 2021 at 11:11:28AM +0000, Andre Przywara wrote: > > Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > > > On Wed, Jan 27, 2021 at 05:24:45PM +0000, Andre Przywara wrote: > > > > > Check for the regmap_irqc member to be not NULL before proceeding with > > > > probe. This gets normally filled by the call to regmap_add_irq_chip(), > > > > which we allow to skip now, when the DT node lacks an interrupt > > > > property. > > It sounds like you're trying to register an IRQ chip with a somehow > bogus configuration? Quick background: Those AXP PMICs have an IRQ pin, that was always connected to the NMI pin on Allwinner SoCs. This was used for the power button GPIO interrupt. Now the H616 does not have this pin anymore, and the board does not use a GPIO either. I patched the AXP MFD driver [1] to skip the regmap-irq creation when no interrupts DT property was found, but this NULL pointer now understandably confuses the -pek driver, and leads to this crash: http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/634969.html Hence I wanted to plug this hole, which seems useful regardless of this particular issue. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/634971.html > > > No, the driver is not the right place to patch this; regmap should be > > > fixed so it does not crash instead. > > > I am not sure this is the right approach, those regmap functions look > > more like an internal interface to me, with lots of wrapper functions > > happily dereferencing pointers and reaching into structs. Moving > > NULL checks into those does not sound like the right thing. CC:ing Mark > > for more opinions on this. > > Without having seen the actual issue if you're trying to register an > interrupt controller with a known broken hardware configuration that > does seem like something the caller just shouldn't be doing, it's not > something that's going to transiently happen at runtime and we're very > much trusting that the caller got things right. > > > A more general solution would be to not instantiate this driver here > > at all, when we don't have an interrupt line. > > However at the moment the AXP MFD driver uses a const struct to hold > > all MFD cells, so there is no easy way of omitting the power key > > device dynamically. And even then it would hard code the requirement > > for an interrupt into the MFD driver, when this could be considered an > > implementation detail of the axp20x-pek driver. > > Another approach is to just register the optional device separately. I will have a look at how much this takes. Thanks, Andre ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected 2021-01-28 12:31 ` Andre Przywara @ 2021-01-28 15:05 ` Mark Brown 0 siblings, 0 replies; 6+ messages in thread From: Mark Brown @ 2021-01-28 15:05 UTC (permalink / raw) To: Andre Przywara Cc: Dmitry Torokhov, Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Icenowy Zheng, Rob Herring, Clément Péron, Shuosheng Huang, Yangtao Li, linux-arm-kernel, linux-kernel, linux-sunxi, Lee Jones, linux-input [-- Attachment #1: Type: text/plain, Size: 1916 bytes --] On Thu, Jan 28, 2021 at 12:31:36PM +0000, Andre Przywara wrote: > Mark Brown <broonie@kernel.org> wrote: > > It sounds like you're trying to register an IRQ chip with a somehow > > bogus configuration? > I patched the AXP MFD driver [1] to skip the regmap-irq creation when no > interrupts DT property was found, but this NULL pointer now > understandably confuses the -pek driver, and leads to this crash: > http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/634969.html > Hence I wanted to plug this hole, which seems useful regardless of this > particular issue. The driver code here looks pretty confused. It appears to be looking up the interrupt to use from a resource (which is what I'd expect for a MFD child) then for reasons I can't fathom trying to pass that resource into regmap_irq_get_virq() which is at best going to just return the value that was passed in but may potentially end up just returning a random interrupt other than the one that was asked for since we're passing in a global interrupt number rather than a controller relative one. I really can't tell what's supposed to be going on there. A driver should either use resources or it should use regmap_irq_get_virq(), using both is a bug. The MFD for this device is also just plain buggy in that it is providing IRQ resources to the children when there is in fact no support for the interrupts on the device in the system. This means that the MFD core sees that it has no interrupt domain, assumes that those interrupt resources are in fact absolute interrupt numbers and passes them straight through to the children. This means that the children will just be requesting random interrupts in the system which may actually exist and be requestable which probably isn't going to end well. When there is no interrupt controller the parent should not be trying to supply interrupt resources to the children at all. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-01-28 15:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20210127172500.13356-1-andre.przywara@arm.com>
2021-01-27 17:24 ` [PATCH v5 05/20] Input: axp20x-pek: Bail out if AXP has no interrupt line connected Andre Przywara
2021-01-27 19:42 ` Dmitry Torokhov
2021-01-28 11:11 ` Andre Przywara
2021-01-28 11:36 ` Mark Brown
2021-01-28 12:31 ` Andre Przywara
2021-01-28 15:05 ` Mark Brown
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).