[PATCH v1 02/14] spi: pxa2xx: Utilize MMIO and physical base from struct ssp_device

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

We have a duplication of MMIO and physical base addresses in
the struct driver_data, get rid of it and reuse members from
struct ssp_device instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx-dma.c |  4 ++--
 drivers/spi/spi-pxa2xx.c     |  4 +---
 drivers/spi/spi-pxa2xx.h     | 14 ++++----------
 3 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 37567bc7a523..3b27f356a18f 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -94,14 +94,14 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 	cfg.direction = dir;
 
 	if (dir == DMA_MEM_TO_DEV) {
-		cfg.dst_addr = drv_data->ssdr_physical;
+		cfg.dst_addr = drv_data->ssp->phys_base + SSDR;
 		cfg.dst_addr_width = width;
 		cfg.dst_maxburst = chip->dma_burst_size;
 
 		sgt = &xfer->tx_sg;
 		chan = drv_data->controller->dma_tx;
 	} else {
-		cfg.src_addr = drv_data->ssdr_physical;
+		cfg.src_addr = drv_data->ssp->phys_base + SSDR;
 		cfg.src_addr_width = width;
 		cfg.src_maxburst = chip->dma_burst_size;
 
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 0ef22045b006..82df028c4a71 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -325,7 +325,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
 	u32 value;
 
 	config = lpss_get_config(drv_data);
-	drv_data->lpss_base = drv_data->ioaddr + config->offset;
+	drv_data->lpss_base = drv_data->ssp->mmio_base + config->offset;
 
 	/* Enable software chip select control */
 	value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
@@ -1729,8 +1729,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 
 	drv_data->ssp_type = ssp->type;
 
-	drv_data->ioaddr = ssp->mmio_base;
-	drv_data->ssdr_physical = ssp->phys_base + SSDR;
 	if (pxa25x_ssp_comp(drv_data)) {
 		switch (drv_data->ssp_type) {
 		case QUARK_X1000_SSP:
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index 1400472bc986..ad9980ebefa6 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -33,10 +33,6 @@ struct driver_data {
 	/* PXA hookup */
 	struct pxa2xx_spi_controller *controller_info;
 
-	/* SSP register addresses */
-	void __iomem *ioaddr;
-	phys_addr_t ssdr_physical;
-
 	/* SSP masks*/
 	u32 dma_cr1;
 	u32 int_cr1;
@@ -87,16 +83,14 @@ struct chip_data {
 	void (*cs_control)(u32 command);
 };
 
-static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data,
-				  unsigned reg)
+static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg)
 {
-	return __raw_readl(drv_data->ioaddr + reg);
+	return pxa_ssp_read_reg(drv_data->ssp, reg);
 }
 
-static  inline void pxa2xx_spi_write(const struct driver_data *drv_data,
-				     unsigned reg, u32 val)
+static inline void pxa2xx_spi_write(const struct driver_data *drv_data, u32 reg, u32 val)
 {
-	__raw_writel(val, drv_data->ioaddr + reg);
+	pxa_ssp_write_reg(drv_data->ssp, reg, val);
 }
 
 #define DMA_ALIGNMENT		8
-- 
2.30.2