* [PATCH v2] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema
@ 2021-05-17 7:18 Oleksij Rempel
2021-05-18 12:41 ` Oleksij Rempel
2021-05-18 14:47 ` Rob Herring
0 siblings, 2 replies; 3+ messages in thread
From: Oleksij Rempel @ 2021-05-17 7:18 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Jonathan Cameron
Cc: Oleksij Rempel, kernel, linux-kernel, linux-input, David Jander,
devicetree
Convert the resistive-adc-touch binding to DT schema format using json-schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../input/touchscreen/resistive-adc-touch.txt | 33 ----------
.../touchscreen/resistive-adc-touch.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 33 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
deleted file mode 100644
index af5223bb5bdd..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Generic resistive touchscreen ADC
-
-Required properties:
-
- - compatible: must be "resistive-adc-touch"
-The device must be connected to an ADC device that provides channels for
-position measurement and optional pressure.
-Refer to
-https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
-for details
-
- - iio-channels: must have at least two channels connected to an ADC device.
-These should correspond to the channels exposed by the ADC device and should
-have the right index as the ADC device registers them. These channels
-represent the relative position on the "x" and "y" axes.
- - iio-channel-names: must have all the channels' names. Mandatory channels
-are "x" and "y".
-
-Optional properties:
- - iio-channels: The third channel named "pressure" is optional and can be
-used if the ADC device also measures pressure besides position.
-If this channel is missing, pressure will be ignored and the touchscreen
-will only report position.
- - iio-channel-names: optional channel named "pressure".
-
-Example:
-
- resistive_touch: resistive_touch {
- compatible = "resistive-adc-touch";
- touchscreen-min-pressure = <50000>;
- io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
- io-channel-names = "x", "y", "pressure";
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
new file mode 100644
index 000000000000..53df21a6589e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic resistive touchscreen ADC
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+ Generic ADC based resistive touchscreen controller
+ The device must be connected to an ADC device that provides channels for
+ position measurement and optional pressure.
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: resistive-adc-touch
+
+ io-channels:
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: x
+ - description: y
+ - description: pressure (optional)
+
+ io-channel-names:
+ items:
+ - const: x
+ - const: y
+ - const: pressure
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-min-pressure: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+
+examples:
+ - |
+ resistive_touch {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+ io-channel-names = "x", "y", "pressure";
+ };
--
2.29.2
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema
2021-05-17 7:18 [PATCH v2] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema Oleksij Rempel
@ 2021-05-18 12:41 ` Oleksij Rempel
2021-05-18 14:47 ` Rob Herring
1 sibling, 0 replies; 3+ messages in thread
From: Oleksij Rempel @ 2021-05-18 12:41 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Jonathan Cameron
Cc: kernel, linux-kernel, linux-input, David Jander, devicetree
I'll resend this patch with all followup patches depending on this
change.
On Mon, May 17, 2021 at 09:18:24AM +0200, Oleksij Rempel wrote:
> Convert the resistive-adc-touch binding to DT schema format using json-schema.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../input/touchscreen/resistive-adc-touch.txt | 33 ----------
> .../touchscreen/resistive-adc-touch.yaml | 61 +++++++++++++++++++
> 2 files changed, 61 insertions(+), 33 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
> deleted file mode 100644
> index af5223bb5bdd..000000000000
> --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Generic resistive touchscreen ADC
> -
> -Required properties:
> -
> - - compatible: must be "resistive-adc-touch"
> -The device must be connected to an ADC device that provides channels for
> -position measurement and optional pressure.
> -Refer to
> -https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
> -for details
> -
> - - iio-channels: must have at least two channels connected to an ADC device.
> -These should correspond to the channels exposed by the ADC device and should
> -have the right index as the ADC device registers them. These channels
> -represent the relative position on the "x" and "y" axes.
> - - iio-channel-names: must have all the channels' names. Mandatory channels
> -are "x" and "y".
> -
> -Optional properties:
> - - iio-channels: The third channel named "pressure" is optional and can be
> -used if the ADC device also measures pressure besides position.
> -If this channel is missing, pressure will be ignored and the touchscreen
> -will only report position.
> - - iio-channel-names: optional channel named "pressure".
> -
> -Example:
> -
> - resistive_touch: resistive_touch {
> - compatible = "resistive-adc-touch";
> - touchscreen-min-pressure = <50000>;
> - io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
> - io-channel-names = "x", "y", "pressure";
> - };
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
> new file mode 100644
> index 000000000000..53df21a6589e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic resistive touchscreen ADC
> +
> +maintainers:
> + - Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +description: |
> + Generic ADC based resistive touchscreen controller
> + The device must be connected to an ADC device that provides channels for
> + position measurement and optional pressure.
> +
> +allOf:
> + - $ref: touchscreen.yaml#
> +
> +properties:
> + compatible:
> + const: resistive-adc-touch
> +
> + io-channels:
> + minItems: 2
> + maxItems: 3
> + items:
> + - description: x
> + - description: y
> + - description: pressure (optional)
> +
> + io-channel-names:
> + items:
> + - const: x
> + - const: y
> + - const: pressure
> +
> + touchscreen-size-x: true
> + touchscreen-size-y: true
> + touchscreen-fuzz-x: true
> + touchscreen-fuzz-y: true
> + touchscreen-inverted-x: true
> + touchscreen-inverted-y: true
> + touchscreen-swapped-x-y: true
> + touchscreen-min-pressure: true
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - io-channels
> + - io-channel-names
> +
> +examples:
> + - |
> + resistive_touch {
> + compatible = "resistive-adc-touch";
> + touchscreen-min-pressure = <50000>;
> + io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
> + io-channel-names = "x", "y", "pressure";
> + };
> --
> 2.29.2
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema
2021-05-17 7:18 [PATCH v2] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema Oleksij Rempel
2021-05-18 12:41 ` Oleksij Rempel
@ 2021-05-18 14:47 ` Rob Herring
1 sibling, 0 replies; 3+ messages in thread
From: Rob Herring @ 2021-05-18 14:47 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Dmitry Torokhov, Jonathan Cameron, kernel, linux-kernel,
linux-input, David Jander, devicetree
On Mon, May 17, 2021 at 09:18:24AM +0200, Oleksij Rempel wrote:
> Convert the resistive-adc-touch binding to DT schema format using json-schema.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../input/touchscreen/resistive-adc-touch.txt | 33 ----------
> .../touchscreen/resistive-adc-touch.yaml | 61 +++++++++++++++++++
> 2 files changed, 61 insertions(+), 33 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
> deleted file mode 100644
> index af5223bb5bdd..000000000000
> --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Generic resistive touchscreen ADC
> -
> -Required properties:
> -
> - - compatible: must be "resistive-adc-touch"
> -The device must be connected to an ADC device that provides channels for
> -position measurement and optional pressure.
> -Refer to
> -https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
> -for details
> -
> - - iio-channels: must have at least two channels connected to an ADC device.
> -These should correspond to the channels exposed by the ADC device and should
> -have the right index as the ADC device registers them. These channels
> -represent the relative position on the "x" and "y" axes.
> - - iio-channel-names: must have all the channels' names. Mandatory channels
> -are "x" and "y".
> -
> -Optional properties:
> - - iio-channels: The third channel named "pressure" is optional and can be
> -used if the ADC device also measures pressure besides position.
> -If this channel is missing, pressure will be ignored and the touchscreen
> -will only report position.
> - - iio-channel-names: optional channel named "pressure".
> -
> -Example:
> -
> - resistive_touch: resistive_touch {
> - compatible = "resistive-adc-touch";
> - touchscreen-min-pressure = <50000>;
> - io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
> - io-channel-names = "x", "y", "pressure";
> - };
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
> new file mode 100644
> index 000000000000..53df21a6589e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic resistive touchscreen ADC
> +
> +maintainers:
> + - Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +description: |
> + Generic ADC based resistive touchscreen controller
> + The device must be connected to an ADC device that provides channels for
> + position measurement and optional pressure.
> +
> +allOf:
> + - $ref: touchscreen.yaml#
> +
> +properties:
> + compatible:
> + const: resistive-adc-touch
> +
> + io-channels:
> + minItems: 2
> + maxItems: 3
maxItems is implied by the 'items' length.
> + items:
> + - description: x
> + - description: y
> + - description: pressure (optional)
> +
> + io-channel-names:
This needs minItems, too.
> + items:
> + - const: x
> + - const: y
> + - const: pressure
> +
> + touchscreen-size-x: true
> + touchscreen-size-y: true
> + touchscreen-fuzz-x: true
> + touchscreen-fuzz-y: true
> + touchscreen-inverted-x: true
> + touchscreen-inverted-y: true
> + touchscreen-swapped-x-y: true
> + touchscreen-min-pressure: true
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - io-channels
> + - io-channel-names
> +
> +examples:
> + - |
> + resistive_touch {
touchscreen {
> + compatible = "resistive-adc-touch";
> + touchscreen-min-pressure = <50000>;
> + io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
> + io-channel-names = "x", "y", "pressure";
> + };
> --
> 2.29.2
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-05-18 14:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-05-17 7:18 [PATCH v2] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema Oleksij Rempel
2021-05-18 12:41 ` Oleksij Rempel
2021-05-18 14:47 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).