From: Dmitry Antipov <daantipov@gmail.com>
To: jikos@kernel.org, benjamin.tissoires@redhat.com,
linux-input@vger.kernel.org, felipe.balbi@microsoft.com,
jeff.glaum@microsoft.com
Cc: Dmitry Antipov <dmanti@microsoft.com>
Subject: [PATCH] HID: Support Microsoft Surface Duo SPI-based touch controller driver as a module.
Date: Wed, 11 Aug 2021 17:12:50 -0700 [thread overview]
Message-ID: <20210812001250.1709418-1-dmanti@microsoft.com> (raw)
Surface Duo uses a touch digitizer that communicates to the main SoC via SPI
and presents itself as a HID device. This patch contains the changes needed
for the driver to work as a module: HID Core affordances for SPI devices,
addition of the new Device IDs, and a new quirk in hid-microsoft. The driver
itself is being prepared for a submission in the near future.
Signed-off-by: Dmitry Antipov dmanti@microsoft.com
---
drivers/hid/hid-core.c | 3 +++
drivers/hid/hid-ids.h | 2 ++
drivers/hid/hid-microsoft.c | 15 +++++++++++++--
drivers/hid/hid-quirks.c | 2 ++
include/linux/hid.h | 2 ++
5 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 7db332139f7d..123a0e3a6b1a 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2005,6 +2005,9 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
case BUS_I2C:
bus = "I2C";
break;
+ case BUS_SPI:
+ bus = "SPI";
+ break;
case BUS_VIRTUAL:
bus = "VIRTUAL";
break;
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 8f1893e68112..5c181d23a7ae 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -885,6 +885,8 @@
#define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd
#define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb
#define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS 0x02e0
+#define SPI_DEVICE_ID_MS_SURFACE_G6_0 0x0c1d
+#define SPI_DEVICE_ID_MS_SURFACE_G6_1 0x0c42
#define USB_VENDOR_ID_MOJO 0x8282
#define USB_DEVICE_ID_RETRO_ADAPTER 0x3201
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index 071fd093a5f4..50ea1f68c285 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -27,6 +27,7 @@
#define MS_DUPLICATE_USAGES BIT(5)
#define MS_SURFACE_DIAL BIT(6)
#define MS_QUIRK_FF BIT(7)
+#define MS_NOHIDINPUT BIT(8)
struct ms_data {
unsigned long quirks;
@@ -367,6 +368,7 @@ static int ms_probe(struct hid_device *hdev, const struct hid_device_id *id)
unsigned long quirks = id->driver_data;
struct ms_data *ms;
int ret;
+ unsigned int connect_mask;
ms = devm_kzalloc(&hdev->dev, sizeof(*ms), GFP_KERNEL);
if (ms == NULL)
@@ -376,20 +378,25 @@ static int ms_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_set_drvdata(hdev, ms);
+ connect_mask = HID_CONNECT_DEFAULT | ((quirks & MS_HIDINPUT) ?
+ HID_CONNECT_HIDINPUT_FORCE : 0);
+
if (quirks & MS_NOGET)
hdev->quirks |= HID_QUIRK_NOGET;
if (quirks & MS_SURFACE_DIAL)
hdev->quirks |= HID_QUIRK_INPUT_PER_APP;
+ if (quirks & MS_NOHIDINPUT)
+ connect_mask &= ~HID_CONNECT_HIDINPUT;
+
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err_free;
}
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT | ((quirks & MS_HIDINPUT) ?
- HID_CONNECT_HIDINPUT_FORCE : 0));
+ ret = hid_hw_start(hdev, connect_mask);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err_free;
@@ -450,6 +457,10 @@ static const struct hid_device_id ms_devices[] = {
.driver_data = MS_QUIRK_FF },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS),
.driver_data = MS_QUIRK_FF },
+ { HID_SPI_DEVICE(USB_VENDOR_ID_MICROSOFT, SPI_DEVICE_ID_MS_SURFACE_G6_0),
+ .driver_data = MS_NOHIDINPUT },
+ { HID_SPI_DEVICE(USB_VENDOR_ID_MICROSOFT, SPI_DEVICE_ID_MS_SURFACE_G6_1),
+ .driver_data = MS_NOHIDINPUT },
{ }
};
MODULE_DEVICE_TABLE(hid, ms_devices);
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 51b39bda9a9d..01609e5425b9 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -506,6 +506,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
+ { HID_SPI_DEVICE(USB_VENDOR_ID_MICROSOFT, SPI_DEVICE_ID_MS_SURFACE_G6_0) },
+ { HID_SPI_DEVICE(USB_VENDOR_ID_MICROSOFT, SPI_DEVICE_ID_MS_SURFACE_G6_1) },
#endif
#if IS_ENABLED(CONFIG_HID_MONTEREY)
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 9e067f937dbc..32823c6b65f6 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -684,6 +684,8 @@ struct hid_descriptor {
.bus = BUS_BLUETOOTH, .vendor = (ven), .product = (prod)
#define HID_I2C_DEVICE(ven, prod) \
.bus = BUS_I2C, .vendor = (ven), .product = (prod)
+#define HID_SPI_DEVICE(ven, prod) \
+ .bus = BUS_SPI, .vendor = (ven), .product = (prod)
#define HID_REPORT_ID(rep) \
.report_type = (rep)
--
2.25.1
next reply other threads:[~2021-08-12 0:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-12 0:12 Dmitry Antipov [this message]
2021-08-12 5:04 ` [PATCH] HID: Support Microsoft Surface Duo SPI-based touch controller driver as a module Felipe Balbi
2021-08-12 16:47 ` Benjamin Tissoires
2021-08-12 17:13 ` Felipe Balbi
2021-08-12 17:23 ` Benjamin Tissoires
2021-08-12 21:01 ` Dmitry Antipov
2021-08-13 5:09 ` Felipe Balbi
2021-08-13 8:11 ` Benjamin Tissoires
2021-08-13 8:55 ` Felipe Balbi
2021-08-13 10:04 ` Benjamin Tissoires
2021-08-15 6:18 ` Felipe Balbi
2021-08-13 7:53 ` Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210812001250.1709418-1-dmanti@microsoft.com \
--to=daantipov@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dmanti@microsoft.com \
--cc=felipe.balbi@microsoft.com \
--cc=jeff.glaum@microsoft.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).