From: Hans de Goede <hdegoede@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
Bastien Nocera <hadess@hadess.net>,
linux-input@vger.kernel.org
Subject: [PATCH v2 3/6] Input: goodix - Refactor reset handling
Date: Mon, 20 Sep 2021 17:06:40 +0200 [thread overview]
Message-ID: <20210920150643.155872-4-hdegoede@redhat.com> (raw)
In-Reply-To: <20210920150643.155872-1-hdegoede@redhat.com>
Refactor reset handling a bit, change the main reset handler
into a new goodix_reset_no_int_sync() helper and add a
goodix_reset() wrapper which calls goodix_int_sync()
separately.
Also push the dev_err() call on reset failure into the
goodix_reset_no_int_sync() and goodix_int_sync() functions,
so that we don't need to have separate dev_err() calls in
all their callers.
This is a preparation patch for adding support for controllers
without flash, which need to have their firmware uploaded and
need some other special handling too.
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/input/touchscreen/goodix.c | 46 +++++++++++++++++++-----------
drivers/input/touchscreen/goodix.h | 1 +
2 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index ecd2e4dcaf53..7ab4a19fb2bf 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -595,56 +595,74 @@ int goodix_int_sync(struct goodix_ts_data *ts)
error = goodix_irq_direction_output(ts, 0);
if (error)
- return error;
+ goto error;
msleep(50); /* T5: 50ms */
error = goodix_irq_direction_input(ts);
if (error)
- return error;
+ goto error;
return 0;
+error:
+ dev_err(&ts->client->dev, "Controller irq sync failed.\n");
+ return error;
}
/**
- * goodix_reset - Reset device during power on
+ * goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode
*
* @ts: goodix_ts_data pointer
*/
-static int goodix_reset(struct goodix_ts_data *ts)
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
{
int error;
/* begin select I2C slave addr */
error = gpiod_direction_output(ts->gpiod_rst, 0);
if (error)
- return error;
+ goto error;
msleep(20); /* T2: > 10ms */
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
if (error)
- return error;
+ goto error;
usleep_range(100, 2000); /* T3: > 100us */
error = gpiod_direction_output(ts->gpiod_rst, 1);
if (error)
- return error;
+ goto error;
usleep_range(6000, 10000); /* T4: > 5ms */
/* end select I2C slave addr */
error = gpiod_direction_input(ts->gpiod_rst);
if (error)
- return error;
+ goto error;
- error = goodix_int_sync(ts);
+ return 0;
+error:
+ dev_err(&ts->client->dev, "Controller reset failed.\n");
+ return error;
+}
+
+/**
+ * goodix_reset - Reset device during power on
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_reset(struct goodix_ts_data *ts)
+{
+ int error;
+
+ error = goodix_reset_no_int_sync(ts);
if (error)
return error;
- return 0;
+ return goodix_int_sync(ts);
}
#ifdef ACPI_GPIO_SUPPORT
@@ -1143,10 +1161,8 @@ static int goodix_ts_probe(struct i2c_client *client,
if (ts->reset_controller_at_probe) {
/* reset the controller */
error = goodix_reset(ts);
- if (error) {
- dev_err(&client->dev, "Controller reset failed.\n");
+ if (error)
return error;
- }
}
error = goodix_i2c_test(client);
@@ -1288,10 +1304,8 @@ static int __maybe_unused goodix_resume(struct device *dev)
if (error != 0 || config_ver != ts->config[0]) {
error = goodix_reset(ts);
- if (error) {
- dev_err(dev, "Controller reset failed.\n");
+ if (error)
return error;
- }
error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
if (error)
diff --git a/drivers/input/touchscreen/goodix.h b/drivers/input/touchscreen/goodix.h
index cdaced4f2980..0b88554ba2ae 100644
--- a/drivers/input/touchscreen/goodix.h
+++ b/drivers/input/touchscreen/goodix.h
@@ -69,5 +69,6 @@ int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len)
int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value);
int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len);
int goodix_int_sync(struct goodix_ts_data *ts);
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts);
#endif
--
2.31.1
next prev parent reply other threads:[~2021-09-20 15:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-20 15:06 [PATCH v2 0/6] Input: goodix - Add support for controllers without flash Hans de Goede
2021-09-20 15:06 ` [PATCH v2 1/6] Input: goodix - Change goodix_i2c_write() len parameter type to int Hans de Goede
2021-09-20 15:06 ` [PATCH v2 2/6] Input: goodix - Add a goodix.h header file Hans de Goede
2021-09-20 15:06 ` Hans de Goede [this message]
2021-09-20 15:06 ` [PATCH v2 4/6] Input: goodix - Push error logging up into i2c_read and i2c_write helpers Hans de Goede
2021-09-20 15:06 ` [PATCH v2 5/6] Input: goodix - Allow specifying the config filename through a "goodix,config-name" device-property Hans de Goede
2021-09-20 15:06 ` [PATCH v2 6/6] Input: goodix - Add support for controllers without flash Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210920150643.155872-4-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=hadess@hadess.net \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).