[PATCH v7 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver

[PATCH v7 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver

[Charles Mirabile]

This patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD
key events when moved in any of the four directions and the BTN_SELECT
event when depressed.

Co-developed-by: Daniel Bauman <dbauman@redhat.com>
Signed-off-by: Daniel Bauman <dbauman@redhat.com>
Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
---
 drivers/input/joystick/Kconfig             |  11 ++
 drivers/input/joystick/Makefile            |   1 +
 drivers/input/joystick/sensehat-joystick.c | 128 +++++++++++++++++++++
 3 files changed, 140 insertions(+)
 create mode 100644 drivers/input/joystick/sensehat-joystick.c

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 3b23078bc7b5..505a032e2786 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -399,4 +399,15 @@ config JOYSTICK_N64
 	  Say Y here if you want enable support for the four
 	  built-in controller ports on the Nintendo 64 console.
 
+config JOYSTICK_SENSEHAT
+	tristate "Raspberry Pi Sense HAT joystick"
+	depends on INPUT && I2C
+	select MFD_SIMPLE_MFD_I2C
+	help
+	  Say Y here if you want to enable the driver for the
+	  the Raspberry Pi Sense HAT.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sensehat_joystick.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 5174b8aba2dd..39c8b5c6e5ae 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_JOYSTICK_N64)		+= n64joy.o
 obj-$(CONFIG_JOYSTICK_PSXPAD_SPI)	+= psxpad-spi.o
 obj-$(CONFIG_JOYSTICK_PXRC)		+= pxrc.o
 obj-$(CONFIG_JOYSTICK_QWIIC)		+= qwiic-joystick.o
+obj-$(CONFIG_JOYSTICK_SENSEHAT)         += sensehat-joystick.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
 obj-$(CONFIG_JOYSTICK_SPACEORB)		+= spaceorb.o
diff --git a/drivers/input/joystick/sensehat-joystick.c b/drivers/input/joystick/sensehat-joystick.c
new file mode 100644
index 000000000000..0a99cf0f3ba0
--- /dev/null
+++ b/drivers/input/joystick/sensehat-joystick.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Raspberry Pi Sense HAT joystick driver
+ * http://raspberrypi.org
+ *
+ * Copyright (C) 2015 Raspberry Pi
+ * Copyright (C) 2021 Charles Mirabile, Mwesigwa Guma, Joel Savitz
+ *
+ * Original Author: Serge Schneider
+ * Revised for upstream Linux by: Charles Mirabile, Mwesigwa Guma, Joel Savitz
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/property.h>
+
+#define JOYSTICK_SMB_REG 0xf2
+
+struct sensehat_joystick {
+	struct platform_device *pdev;
+	struct input_dev *keys_dev;
+	unsigned long prev_states;
+	struct regmap *regmap;
+};
+
+static const unsigned int keymap[] = {
+	BTN_DPAD_DOWN, BTN_DPAD_RIGHT, BTN_DPAD_UP, BTN_SELECT, BTN_DPAD_LEFT,
+};
+
+static irqreturn_t sensehat_joystick_report(int n, void *cookie)
+{
+	int i, error, keys;
+	struct sensehat_joystick *sensehat_joystick = cookie;
+	unsigned long curr_states, changes;
+
+	error = regmap_read(sensehat_joystick->regmap, JOYSTICK_SMB_REG, &keys);
+	if (error < 0) {
+		dev_err(&sensehat_joystick->pdev->dev,
+			"Failed to read joystick state: %d", error);
+		return IRQ_NONE;
+	}
+	curr_states = keys;
+	bitmap_xor(&changes, &curr_states, &sensehat_joystick->prev_states,
+		   ARRAY_SIZE(keymap));
+
+	for_each_set_bit(i, &changes, ARRAY_SIZE(keymap)) {
+		input_report_key(sensehat_joystick->keys_dev, keymap[i],
+				 curr_states & BIT(i));
+	}
+
+	input_sync(sensehat_joystick->keys_dev);
+	sensehat_joystick->prev_states = keys;
+	return IRQ_HANDLED;
+}
+
+static int sensehat_joystick_probe(struct platform_device *pdev)
+{
+	int error, i, irq;
+	struct sensehat_joystick *sensehat_joystick = devm_kzalloc(
+		&pdev->dev, sizeof(*sensehat_joystick), GFP_KERNEL);
+
+	sensehat_joystick->pdev = pdev;
+
+	sensehat_joystick->regmap = dev_get_regmap(sensehat_joystick->pdev->dev.parent, NULL);
+
+	sensehat_joystick->keys_dev = devm_input_allocate_device(&pdev->dev);
+	if (!sensehat_joystick->keys_dev) {
+		dev_err(&pdev->dev, "Could not allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(keymap); i++)
+		set_bit(keymap[i], sensehat_joystick->keys_dev->keybit);
+
+	sensehat_joystick->keys_dev->name = "Raspberry Pi Sense HAT Joystick";
+	sensehat_joystick->keys_dev->phys = "sensehat-joystick/input0";
+	sensehat_joystick->keys_dev->id.bustype = BUS_I2C;
+	sensehat_joystick->keys_dev->evbit[0] =
+		BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+
+	error = input_register_device(sensehat_joystick->keys_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Could not register input device.\n");
+		return error;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Could not retrieve interrupt request.\n");
+		return irq;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					  sensehat_joystick_report,
+					  IRQF_ONESHOT, "keys",
+					  sensehat_joystick);
+
+	if (error) {
+		dev_err(&pdev->dev, "IRQ request failed.\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sensehat_joystick_device_id[] = {
+	{ .compatible = "raspberrypi,sensehat-joystick" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sensehat_joystick_device_id);
+
+static struct platform_driver sensehat_joystick_driver = {
+	.probe = sensehat_joystick_probe,
+	.driver = {
+		.name = "sensehat-joystick",
+		.of_match_table = sensehat_joystick_device_id,
+	},
+};
+
+module_platform_driver(sensehat_joystick_driver);
+
+MODULE_DESCRIPTION("Raspberry Pi Sense HAT joystick driver");
+MODULE_AUTHOR("Serge Schneider <serge@raspberrypi.org>");
+MODULE_LICENSE("GPL");
-- 
2.31.1

[PATCH v7 4/6] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema

[Charles Mirabile]

This patch adds the device tree bindings for the Sense HAT
and each of its children devices in yaml form.

Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
---
 .../raspberrypi,sensehat-display.yaml         | 27 ++++++++
 .../input/raspberrypi,sensehat-joystick.yaml  | 33 +++++++++
 .../bindings/mfd/raspberrypi,sensehat.yaml    | 69 +++++++++++++++++++
 3 files changed, 129 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml
 create mode 100644 Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml

diff --git a/Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml b/Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml
new file mode 100644
index 000000000000..5e41d6b7817d
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/raspberrypi,sensehat-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi Sensehat Display
+
+maintainers:
+  - Charles Mirabile <cmirabil@redhat.com>
+  - Mwesigwa Guma <mguma@redhat.com>
+  - Joel Savitz <jsavitz@redhat.com>
+
+description:
+  This device is part of the sensehat multi function device.
+  For more information see ../mfd/raspberrypi,sensehat.yaml.
+
+  This device features a programmable 8x8 RGB LED matrix.
+
+properties:
+  compatible:
+    const: raspberrypi,sensehat-display
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml b/Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml
new file mode 100644
index 000000000000..c97cd1d8eac6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/raspberrypi,sensehat-joystick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi Sensehat Joystick
+
+maintainers:
+  - Charles Mirabile <cmirabil@redhat.com>
+  - Mwesigwa Guma <mguma@redhat.com>
+  - Joel Savitz <jsavitz@redhat.com>
+
+description:
+  This device is part of the sensehat multi function device.
+  For more information see ../mfd/raspberrypi,sensehat.yaml.
+
+  This device features a five button joystick (up, down,left,
+  right, click)
+
+properties:
+  compatible:
+    const: raspberrypi,sensehat-joystick
+
+  interrupts:
+    items:
+      - description: pin number for joystick interrupt
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml b/Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
new file mode 100644
index 000000000000..2484ec91b430
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/raspberrypi,sensehat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi Sensehat
+
+maintainers:
+  - Charles Mirabile <cmirabil@redhat.com>
+  - Mwesigwa Guma <mguma@redhat.com>
+  - Joel Savitz <jsavitz@redhat.com>
+
+description:
+  The Raspberry Pi Sensehat is an addon board originally developed
+  for the Raspberry Pi that has a joystick and an 8x8 RGB LED display
+  as well as several environmental sensors. It connects via i2c and
+  a gpio for irq.
+
+properties:
+  compatible:
+    const: raspberrypi,sensehat
+
+  reg:
+    items:
+      - description: i2c device address
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "joystick":
+    $ref: ../input/raspberrypi,sensehat-joystick.yaml
+
+  "display":
+    $ref: ../auxdisplay/raspberrypi,sensehat-display.yaml
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - joystick
+  - display
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      sensehat@46 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "raspberrypi,sensehat";
+        reg = <0x46>;
+        display {
+          compatible = "raspberrypi,sensehat-display";
+        };
+        joystick {
+          compatible = "raspberrypi,sensehat-joystick";
+          interrupts = <23 GPIO_ACTIVE_HIGH>;
+        };
+      };
+    };
-- 
2.31.1

Re: [PATCH v7 4/6] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema

[Rob Herring]

On Thu, 03 Mar 2022 12:39:33 -0500, Charles Mirabile wrote:
> This patch adds the device tree bindings for the Sense HAT
> and each of its children devices in yaml form.
> 
> Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
> Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
> Co-developed-by: Joel Savitz <jsavitz@redhat.com>
> Signed-off-by: Joel Savitz <jsavitz@redhat.com>
> Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
> ---
>  .../raspberrypi,sensehat-display.yaml         | 27 ++++++++
>  .../input/raspberrypi,sensehat-joystick.yaml  | 33 +++++++++
>  .../bindings/mfd/raspberrypi,sensehat.yaml    | 69 +++++++++++++++++++
>  3 files changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml
>  create mode 100644 Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml
>  create mode 100644 Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>