From: Rob Herring <robh@kernel.org>
To: Mike Looijmans <mike.looijmans@topic.nl>
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, dmitry.torokhov@gmail.com,
krzysztof.kozlowski+dt@linaro.org, martink@posteo.de,
geert+renesas@glider.be, john@metanate.com, hechtb@gmail.com
Subject: Re: [PATCH] Input: st1232 - Support power supply regulators
Date: Thu, 2 Jun 2022 08:38:55 -0500 [thread overview]
Message-ID: <20220602133855.GA2166481-robh@kernel.org> (raw)
In-Reply-To: <20220524081216.8550-1-mike.looijmans@topic.nl>
On Tue, May 24, 2022 at 10:12:16AM +0200, Mike Looijmans wrote:
> Add support for the VDD and IOVDD power supply inputs. This allows the
> chip to share its supplies with other components (e.g. panel) and manage
> them.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> .../input/touchscreen/sitronix,st1232.yaml | 6 +++
Separate patch please.
> drivers/input/touchscreen/st1232.c | 54 ++++++++++++++++---
> 2 files changed, 52 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
> index 1d8ca19fd37a..240be8d49232 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
> @@ -28,6 +28,12 @@ properties:
> description: A phandle to the reset GPIO
> maxItems: 1
>
> + vdd-supply:
> + description: Power supply regulator for the chip
> +
> + vddio-supply:
> + description: Power supply regulator for the I2C bus
> +
> required:
> - compatible
> - reg
> diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
> index e38ba3e4f183..d9c9f6f1f11a 100644
> --- a/drivers/input/touchscreen/st1232.c
> +++ b/drivers/input/touchscreen/st1232.c
> @@ -44,6 +44,11 @@
> #define REG_XY_COORDINATES 0x12
> #define ST_TS_MAX_FINGERS 10
>
> +enum st1232_regulators {
> + ST1232_REGULATOR_VDD,
> + ST1232_REGULATOR_IOVDD,
> +};
> +
> struct st_chip_info {
> bool have_z;
> u16 max_area;
> @@ -56,6 +61,7 @@ struct st1232_ts_data {
> struct touchscreen_properties prop;
> struct dev_pm_qos_request low_latency_req;
> struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data regulators[2];
> const struct st_chip_info *chip_info;
> int read_buf_len;
> u8 *read_buf;
> @@ -197,17 +203,36 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
> +static int st1232_ts_power_on(struct st1232_ts_data *ts)
> +{
> + int err;
> +
> + err = regulator_bulk_enable(ARRAY_SIZE(ts->regulators), ts->regulators);
> + if (err)
> + return err;
> +
> + usleep_range(5000, 6000);
> +
> + if (ts->reset_gpio)
> + gpiod_set_value_cansleep(ts->reset_gpio, 0);
> +
> + return 0;
> +}
> +
> +static void st1232_ts_power_off(struct st1232_ts_data *ts)
> {
> if (ts->reset_gpio)
> - gpiod_set_value_cansleep(ts->reset_gpio, !poweron);
> + gpiod_set_value_cansleep(ts->reset_gpio, 1);
> + usleep_range(100, 150);
> + regulator_bulk_disable(ARRAY_SIZE(ts->regulators), ts->regulators);
> }
>
> -static void st1232_ts_power_off(void *data)
> +static void st1232_ts_power_off_action(void *data)
> {
> - st1232_ts_power(data, false);
> + st1232_ts_power_off(data);
> }
>
> +
> static const struct st_chip_info st1232_chip_info = {
> .have_z = true,
> .max_area = 0xff,
> @@ -266,6 +291,14 @@ static int st1232_ts_probe(struct i2c_client *client,
> ts->client = client;
> ts->input_dev = input_dev;
>
> + ts->regulators[ST1232_REGULATOR_VDD].supply = "vdd";
> + ts->regulators[ST1232_REGULATOR_IOVDD].supply = "iovdd";
> + error = devm_regulator_bulk_get(&client->dev,
> + ARRAY_SIZE(ts->regulators),
> + ts->regulators);
> + if (error)
> + return error;
> +
> ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL,
> GPIOD_OUT_HIGH);
> if (IS_ERR(ts->reset_gpio)) {
> @@ -275,9 +308,14 @@ static int st1232_ts_probe(struct i2c_client *client,
> return error;
> }
>
> - st1232_ts_power(ts, true);
> + error = st1232_ts_power_on(ts);
> + if (error) {
> + dev_err(&client->dev, "Failed to power on: %d\n", error);
> + return error;
> + }
>
> - error = devm_add_action_or_reset(&client->dev, st1232_ts_power_off, ts);
> + error = devm_add_action_or_reset(&client->dev,
> + st1232_ts_power_off_action, ts);
> if (error) {
> dev_err(&client->dev,
> "Failed to install power off action: %d\n", error);
> @@ -348,7 +386,7 @@ static int __maybe_unused st1232_ts_suspend(struct device *dev)
> disable_irq(client->irq);
>
> if (!device_may_wakeup(&client->dev))
> - st1232_ts_power(ts, false);
> + st1232_ts_power_off(ts);
>
> return 0;
> }
> @@ -359,7 +397,7 @@ static int __maybe_unused st1232_ts_resume(struct device *dev)
> struct st1232_ts_data *ts = i2c_get_clientdata(client);
>
> if (!device_may_wakeup(&client->dev))
> - st1232_ts_power(ts, true);
> + st1232_ts_power_on(ts);
>
> enable_irq(client->irq);
>
> --
> 2.17.1
>
>
prev parent reply other threads:[~2022-06-02 13:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-24 8:12 [PATCH] Input: st1232 - Support power supply regulators Mike Looijmans
2022-05-28 4:47 ` Dmitry Torokhov
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.448f4393-43fc-4ee3-8849-d41a20e1be99@emailsignatures365.codetwo.com>
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.0d2bd5fa-15cc-4b27-b94e-83614f9e5b38.95a3a45c-fed7-48c4-9f4f-59d66a927377@emailsignatures365.codetwo.com>
2022-05-30 5:50 ` Mike Looijmans
2022-06-02 13:38 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220602133855.GA2166481-robh@kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=geert+renesas@glider.be \
--cc=hechtb@gmail.com \
--cc=john@metanate.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mike.looijmans@topic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).