[PATCH v13 0/3] adc-joystick: add poll-interval

[PATCH v13 0/3] adc-joystick: add poll-interval

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support to the existing adc-joystick driver to support polling
rather than relying on triggered buffers. This is useful for devices
that do not offer triggered buffers in hardware. Code adapted from
changes made by Maya Matuszczyk <maccraft123mc@gmail.com>.

Changes from V12:
 - Refactor for 6.0 kernel. This required changing the return routine
   slightly for the probe function as the input device registration
   has moved.
 - Modified error handling for checking the "poll-interval" property.

Changes from V11:
 - Remove additional unnecessary line breaks.

Changes from V10:
 - Removed two unnecessary line breaks.

Changes from V9:
 - Simplified skipping of channel checking logic.
 - Simplified return logic for driver probe.

Changes from V8:
 - Changed logic for checking channels to skip checking of storagebits.
 - Changed comment format to comply with Linux style rules.

Changes from V7:
 - Dropped acks from adc-joystick.c changes, as it has been altered
   somewhat since v7.
 - Improved checking value of poll-interval to ensure explicit error
   handling in the event of malformed values.
 - Adjusted logic to not check for storagebits if polling is in use,
   which allows adc-joystick to work in polling mode for devices that
   utilize a mux (such as the Odroid Go Super and the Anbernic RG353).
 - Changed error message and channel size comparison logic slightly to
   ensure code can fit within 80 character column width.

Changes from V6:
 - Reverted back to "poll-interval" after mailing list discussion.
 - Referenced input.yaml for definition of poll-interval in adc-joystick
   documentation.

Changes from V5:
 - Corrected an error found by yamllint in the documentation.

Changes from V4:
 - Added unit property to devicetree attribute making it now
   "poll-interval-ms".
 - Simplified logic for setting polled value and made variable names
   more clear.

Changes from V3:
 - After lengthy discussion decided to support with existing attribute
   of "poll-interval". If present, the driver will use polling and if
   not present, it will use triggered buffers (as the driver does
   today).
 - Corrected some lines to honor the 80 character line-limit.
 - Check return value from polling method and return early if there
   is an error reading the data.

Changes from V2:
 - Changed parameter from "adc-joystick,polled" to
   "adc-joystick,no-hardware-trigger" as it is more representative of
   what the driver and hardware are doing.

Changes from V1:
 - Removed driver compatible string of "adc-joystick-polled".
 - Added new optional boolean value of "adc-joystick,polled".
 - Cleaned up if statements regarding polling behavior.

Chris Morgan (3):
  dt-bindings: adc-joystick: add poll-interval
  input: adc-joystick - Add polled input device support
  arm64: dts: rockchip: Update joystick to polled for OG2

 .../bindings/input/adc-joystick.yaml          |  5 ++
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   |  1 +
 drivers/input/joystick/adc-joystick.c         | 48 +++++++++++++++++--
 3 files changed, 51 insertions(+), 3 deletions(-)

-- 
2.25.1

[PATCH v13 1/3] dt-bindings: adc-joystick: add poll-interval

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
---
 Documentation/devicetree/bindings/input/adc-joystick.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 64d961458ac7..da0f8dfca8bf 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -14,6 +14,9 @@ description: >
   Bindings for joystick devices connected to ADC controllers supporting
   the Industrial I/O subsystem.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: adc-joystick
@@ -28,6 +31,8 @@ properties:
       https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
       for details.
 
+  poll-interval: true
+
   '#address-cells':
     const: 1
 
-- 
2.25.1

[PATCH v13 2/3] input: adc-joystick - Add polled input device support

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add polled input device support to the adc-joystick driver. This is
useful for devices which do not have hardware capable triggers on
their SARADC. Code modified from adc-joystick.c changes made by Maya
Matuszczyk.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/input/joystick/adc-joystick.c | 48 +++++++++++++++++++++++++--
 1 file changed, 45 insertions(+), 3 deletions(-)

diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
index e0cfdc84763f..3942574e8ecf 100644
--- a/drivers/input/joystick/adc-joystick.c
+++ b/drivers/input/joystick/adc-joystick.c
@@ -26,8 +26,23 @@ struct adc_joystick {
 	struct adc_joystick_axis *axes;
 	struct iio_channel *chans;
 	int num_chans;
+	bool polled;
 };
 
+static void adc_joystick_poll(struct input_dev *input)
+{
+	struct adc_joystick *joy = input_get_drvdata(input);
+	int i, val, ret;
+
+	for (i = 0; i < joy->num_chans; i++) {
+		ret = iio_read_channel_raw(&joy->chans[i], &val);
+		if (ret < 0)
+			return;
+		input_report_abs(input, joy->axes[i].code, val);
+	}
+	input_sync(input);
+}
+
 static int adc_joystick_handle(const void *data, void *private)
 {
 	struct adc_joystick *joy = private;
@@ -179,6 +194,7 @@ static int adc_joystick_probe(struct platform_device *pdev)
 	int error;
 	int bits;
 	int i;
+	unsigned int poll_interval;
 
 	joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
 	if (!joy)
@@ -192,8 +208,25 @@ static int adc_joystick_probe(struct platform_device *pdev)
 		return error;
 	}
 
-	/* Count how many channels we got. NULL terminated. */
+	error = device_property_read_u32(dev, "poll-interval", &poll_interval);
+	if (error) {
+		/* -EINVAL means the property is absent. */
+		if (error != -EINVAL)
+			return error;
+	} else if (poll_interval == 0) {
+		dev_err(dev, "Unable to get poll-interval\n");
+		return -EINVAL;
+	} else {
+		joy->polled = true;
+	}
+
+	/*
+	 * Count how many channels we got. NULL terminated.
+	 * Do not check the storage size if using polling.
+	 */
 	for (i = 0; joy->chans[i].indio_dev; i++) {
+		if (joy->polled)
+			continue;
 		bits = joy->chans[i].channel->scan_type.storagebits;
 		if (!bits || bits > 16) {
 			dev_err(dev, "Unsupported channel storage size\n");
@@ -215,13 +248,20 @@ static int adc_joystick_probe(struct platform_device *pdev)
 	joy->input = input;
 	input->name = pdev->name;
 	input->id.bustype = BUS_HOST;
-	input->open = adc_joystick_open;
-	input->close = adc_joystick_close;
 
 	error = adc_joystick_set_axes(dev, joy);
 	if (error)
 		return error;
 
+	if (joy->polled) {
+		input_setup_polling(input, adc_joystick_poll);
+		input_set_poll_interval(input, poll_interval);
+		goto register_joystick;
+	} else {
+		input->open = adc_joystick_open;
+		input->close = adc_joystick_close;
+	}
+
 	joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
 	if (IS_ERR(joy->buffer)) {
 		dev_err(dev, "Unable to allocate callback buffer\n");
@@ -234,6 +274,8 @@ static int adc_joystick_probe(struct platform_device *pdev)
 		return error;
 	}
 
+register_joystick:
+
 	input_set_drvdata(input, joy);
 
 	error = input_register_device(input);
-- 
2.25.1

[PATCH v13 3/3] arm64: dts: rockchip: Update joystick to polled for OG2

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Update the Odroid Go Advance to use "poll-interval" from the
adc-joystick driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 415aa9ff8bd4..3389755dbdc8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -26,6 +26,7 @@ adc-joystick {
 		compatible = "adc-joystick";
 		io-channels = <&saradc 1>,
 			      <&saradc 2>;
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-- 
2.25.1

Re: (subset) [PATCH v13 0/3] adc-joystick: add poll-interval

[Heiko Stuebner]

On Tue, 16 Aug 2022 16:04:37 -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support to the existing adc-joystick driver to support polling
> rather than relying on triggered buffers. This is useful for devices
> that do not offer triggered buffers in hardware. Code adapted from
> changes made by Maya Matuszczyk <maccraft123mc@gmail.com>.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: rockchip: Update joystick to polled for OG2
      commit: ec3fd1adfda96f42e70dd5f0f69451d642d3598b

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>