From: Jeff LaBundy <jeff@labundy.com>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH 11/11] Input: iqs7222 - add support for IQS7222A v1.13+
Date: Thu, 8 Sep 2022 08:15:48 -0500 [thread overview]
Message-ID: <20220908131548.48120-12-jeff@labundy.com> (raw)
In-Reply-To: <20220908131548.48120-1-jeff@labundy.com>
IQS7222A revisions 1.13 and later widen the gesture multiplier from
x4 ms to x16 ms. Add a means to scale the gesture timings specified
in the device tree based on the revision of the device.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
drivers/input/misc/iqs7222.c | 122 +++++++++++++++++++++++++++++++++--
1 file changed, 118 insertions(+), 4 deletions(-)
diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c
index ac810b8ab69f..15f0bfa899dd 100644
--- a/drivers/input/misc/iqs7222.c
+++ b/drivers/input/misc/iqs7222.c
@@ -86,7 +86,9 @@ enum iqs7222_reg_key_id {
IQS7222_REG_KEY_TOUCH,
IQS7222_REG_KEY_DEBOUNCE,
IQS7222_REG_KEY_TAP,
+ IQS7222_REG_KEY_TAP_LEGACY,
IQS7222_REG_KEY_AXIAL,
+ IQS7222_REG_KEY_AXIAL_LEGACY,
IQS7222_REG_KEY_WHEEL,
IQS7222_REG_KEY_NO_WHEEL,
IQS7222_REG_KEY_RESERVED
@@ -202,10 +204,68 @@ struct iqs7222_dev_desc {
int allow_offset;
int event_offset;
int comms_offset;
+ bool legacy_gesture;
struct iqs7222_reg_grp_desc reg_grps[IQS7222_NUM_REG_GRPS];
};
static const struct iqs7222_dev_desc iqs7222_devs[] = {
+ {
+ .prod_num = IQS7222_PROD_NUM_A,
+ .fw_major = 1,
+ .fw_minor = 13,
+ .sldr_res = U8_MAX * 16,
+ .touch_link = 1768,
+ .allow_offset = 9,
+ .event_offset = 10,
+ .comms_offset = 12,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 8,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 7,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8700,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 12,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xA000,
+ .num_row = 12,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xAC00,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SLDR] = {
+ .base = 0xB000,
+ .num_row = 2,
+ .num_col = 11,
+ },
+ [IQS7222_REG_GRP_GPIO] = {
+ .base = 0xC000,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 13,
+ },
+ },
+ },
{
.prod_num = IQS7222_PROD_NUM_A,
.fw_major = 1,
@@ -215,6 +275,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = {
.allow_offset = 9,
.event_offset = 10,
.comms_offset = 12,
+ .legacy_gesture = true,
.reg_grps = {
[IQS7222_REG_GRP_STAT] = {
.base = IQS7222_SYS_STATUS,
@@ -874,6 +935,16 @@ static const struct iqs7222_prop_desc iqs7222_props[] = {
.reg_offset = 9,
.reg_shift = 8,
.reg_width = 8,
+ .val_pitch = 16,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_TAP_LEGACY,
+ .reg_offset = 9,
+ .reg_shift = 8,
+ .reg_width = 8,
.val_pitch = 4,
.label = "maximum gesture time",
},
@@ -884,6 +955,16 @@ static const struct iqs7222_prop_desc iqs7222_props[] = {
.reg_offset = 9,
.reg_shift = 3,
.reg_width = 5,
+ .val_pitch = 16,
+ .label = "minimum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-min-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_TAP_LEGACY,
+ .reg_offset = 9,
+ .reg_shift = 3,
+ .reg_width = 5,
.val_pitch = 4,
.label = "minimum gesture time",
},
@@ -897,6 +978,16 @@ static const struct iqs7222_prop_desc iqs7222_props[] = {
.val_pitch = 16,
.label = "gesture distance",
},
+ {
+ .name = "azoteq,gesture-dist",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_AXIAL_LEGACY,
+ .reg_offset = 10,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "gesture distance",
+ },
{
.name = "azoteq,gesture-max-ms",
.reg_grp = IQS7222_REG_GRP_SLDR,
@@ -904,6 +995,16 @@ static const struct iqs7222_prop_desc iqs7222_props[] = {
.reg_offset = 10,
.reg_shift = 0,
.reg_width = 8,
+ .val_pitch = 16,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_AXIAL_LEGACY,
+ .reg_offset = 10,
+ .reg_shift = 0,
+ .reg_width = 8,
.val_pitch = 4,
.label = "maximum gesture time",
},
@@ -2213,16 +2314,29 @@ static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222, int sldr_index)
for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++) {
const char *event_name = iqs7222_sl_events[i].name;
struct fwnode_handle *event_node;
+ enum iqs7222_reg_key_id reg_key;
event_node = fwnode_get_named_child_node(sldr_node, event_name);
if (!event_node)
continue;
+ /*
+ * Depending on the device, gestures are either offered using
+ * one of two timing resolutions, or are not supported at all.
+ */
+ if (reg_offset)
+ reg_key = IQS7222_REG_KEY_RESERVED;
+ else if (dev_desc->legacy_gesture &&
+ iqs7222_sl_events[i].reg_key == IQS7222_REG_KEY_TAP)
+ reg_key = IQS7222_REG_KEY_TAP_LEGACY;
+ else if (dev_desc->legacy_gesture &&
+ iqs7222_sl_events[i].reg_key == IQS7222_REG_KEY_AXIAL)
+ reg_key = IQS7222_REG_KEY_AXIAL_LEGACY;
+ else
+ reg_key = iqs7222_sl_events[i].reg_key;
+
error = iqs7222_parse_props(iqs7222, &event_node, sldr_index,
- IQS7222_REG_GRP_SLDR,
- reg_offset ?
- IQS7222_REG_KEY_RESERVED :
- iqs7222_sl_events[i].reg_key);
+ IQS7222_REG_GRP_SLDR, reg_key);
if (error) {
fwnode_handle_put(event_node);
goto put_sldr_node;
--
2.25.1
prev parent reply other threads:[~2022-09-08 13:17 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 13:15 [PATCH 00/11] Additional fixes for Azoteq IQS7222A/B/C Jeff LaBundy
2022-09-08 13:15 ` [PATCH 01/11] Input: iqs7222 - drop unused device node references Jeff LaBundy
2022-09-08 21:17 ` Dmitry Torokhov
2022-09-09 2:04 ` Jeff LaBundy
2022-09-09 4:37 ` Dmitry Torokhov
2022-09-10 0:00 ` Jeff LaBundy
2022-09-08 13:15 ` [PATCH 02/11] Input: iqs7222 - report malformed properties Jeff LaBundy
2022-09-08 21:21 ` Dmitry Torokhov
2022-09-09 2:08 ` Jeff LaBundy
2022-09-09 4:42 ` Dmitry Torokhov
2022-09-10 0:04 ` Jeff LaBundy
2022-09-08 13:15 ` [PATCH 03/11] dt-bindings: input: iqs7222: Correct minimum slider size Jeff LaBundy
2022-09-13 11:37 ` Rob Herring
2022-09-08 13:15 ` [PATCH 04/11] Input: iqs7222 - protect against undefined " Jeff LaBundy
2022-09-08 13:15 ` [PATCH 05/11] Input: iqs7222 - trim force communication command Jeff LaBundy
2022-09-08 21:24 ` Dmitry Torokhov
2022-09-13 21:24 ` Jeff LaBundy
2022-09-14 10:10 ` Dmitry Torokhov
2022-09-08 13:15 ` [PATCH 06/11] Input: iqs7222 - avoid sending empty SYN_REPORT events Jeff LaBundy
2022-09-14 10:10 ` Dmitry Torokhov
2022-09-08 13:15 ` [PATCH 07/11] Input: iqs7222 - set all ULP entry masks by default Jeff LaBundy
2022-09-14 10:10 ` Dmitry Torokhov
2022-09-08 13:15 ` [PATCH 08/11] Input: iqs7222 - allow 'linux,code' to be optional Jeff LaBundy
2022-09-08 13:15 ` [PATCH 09/11] dt-bindings: input: iqs7222: Allow " Jeff LaBundy
2022-09-13 11:42 ` Rob Herring
2022-09-13 13:47 ` Jeff LaBundy
2022-09-08 13:15 ` [PATCH 10/11] dt-bindings: input: iqs7222: Add support for IQS7222A v1.13+ Jeff LaBundy
2022-09-13 11:44 ` Rob Herring
2022-09-08 13:15 ` Jeff LaBundy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908131548.48120-12-jeff@labundy.com \
--to=jeff@labundy.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).