[PATCH 0/4] Input: touchscreen - Goodix bugfix + settings mod-param support

[Hans de Goede <hdegoede@redhat.com>]

Hi Dmitry, et al,

The first patch in this set is a bugfix for the Goodix touchscreen driver,
it really is independent of the rest, but since the 4th patch will not
apply cleanly without this I have decided to send this as 1 big series.

If there are issues with the rest of the series please apply at least 1/4.

The rest of the series adds support for overriding various silead and
goodix touchscreen related device-properties from the kernel cmdline.
This is a reposting of an earlier version which had the following
cover letter:

On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.

This is handled by drivers/platform/x86/touchscreen_dmi.c which contains
a large list of per-model touchscreen properties which it attaches to the
(i2c)device before the touchscreen driver's probe() method gets called.
This means that ATM changing these settings requires recompiling the
kernel. This makes figuring out what settings/properties a specific
touchscreen needs very hard for normal users to do.

This new settings parameter support is especially useful for helping
users to get their Silead touchscreens to work. These need to have
all of their settings (min-x, width, min-y, height, swapping, inverting)
hardcoded in touchscreen_dmi.c. The settings mod-param allows users
to find the right setting without them needing to be capable of
building their own kernel (and without a lot of rebooting) after which
they can ask someone with some kernel-dev experience to turn this into
a touchscreen_dmi.c patch for them (and yes the way this hw works sucks,
but we cannot change that).

An example of a user who was stuck getting their touchscreen to work and
who was helped by providing a kernel with the settings mod-param added:
https://github.com/onitake/gsl-firmware/discussions/193

Regards,

Hans


Hans de Goede (4):
  Input: goodix - Try resetting the controller when no config is set
  Input: touchscreen - Extend touchscreen_parse_properties() to allow
    overriding settings with a module option
  Input: silead - Add a settings module-parameter
  Input: goodix - Add a settings module-parameter

 drivers/input/touchscreen.c        | 103 ++++++++++++++++++++++++++---
 drivers/input/touchscreen/goodix.c |  18 ++++-
 drivers/input/touchscreen/silead.c |  26 +++++---
 include/linux/input/touchscreen.h  |  19 +++++-
 4 files changed, 142 insertions(+), 24 deletions(-)

-- 
2.37.3