linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Yoshinori Sato <ysato@users.sourceforge.jp>,
	Rich Felker <dalias@libc.org>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arch@vger.kernel.org,
	dmaengine@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-input@vger.kernel.org, linux-media@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org,
	netdev@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-serial@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-fbdev@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-sh@vger.kernel.org
Subject: [PATCH 10/22] input: remove sh_keysc
Date: Fri, 13 Jan 2023 07:23:27 +0100	[thread overview]
Message-ID: <20230113062339.1909087-11-hch@lst.de> (raw)
In-Reply-To: <20230113062339.1909087-1-hch@lst.de>

Now that arch/sh is removed this driver is dead code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/input/keyboard/Kconfig    |  10 -
 drivers/input/keyboard/Makefile   |   1 -
 drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
 3 files changed, 345 deletions(-)
 delete mode 100644 drivers/input/keyboard/sh_keysc.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 84490915ae4d5a..882ec5fef214ac 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sunkbd.
 
-config KEYBOARD_SH_KEYSC
-	tristate "SuperH KEYSC keypad support"
-	depends on ARCH_SHMOBILE || COMPILE_TEST
-	help
-	  Say Y here if you want to use a keypad attached to the KEYSC block
-	  on SuperH processors such as sh7722 and sh7343.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sh_keysc.
-
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 5f67196bb2c1ea..8aba0b052b4504 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -60,7 +60,6 @@ obj-$(CONFIG_KEYBOARD_QT1050)           += qt1050.o
 obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
-obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY)	+= snvs_pwrkey.o
 obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
deleted file mode 100644
index 2c00320f739fc1..00000000000000
--- a/drivers/input/keyboard/sh_keysc.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SuperH KEYSC Keypad Driver
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on gpio_keys.c, Copyright 2005 Phil Blundell
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/bitmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-static const struct {
-	unsigned char kymd, keyout, keyin;
-} sh_keysc_mode[] = {
-	[SH_KEYSC_MODE_1] = { 0, 6, 5 },
-	[SH_KEYSC_MODE_2] = { 1, 5, 6 },
-	[SH_KEYSC_MODE_3] = { 2, 4, 7 },
-	[SH_KEYSC_MODE_4] = { 3, 6, 6 },
-	[SH_KEYSC_MODE_5] = { 4, 6, 7 },
-	[SH_KEYSC_MODE_6] = { 5, 8, 8 },
-};
-
-struct sh_keysc_priv {
-	void __iomem *iomem_base;
-	DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
-	struct input_dev *input;
-	struct sh_keysc_info pdata;
-};
-
-#define KYCR1 0
-#define KYCR2 1
-#define KYINDR 2
-#define KYOUTDR 3
-
-#define KYCR2_IRQ_LEVEL    0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
-static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
-{
-	return ioread16(p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
-			   unsigned long value)
-{
-	iowrite16(value, p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_level_mode(struct sh_keysc_priv *p,
-				unsigned long keys_set)
-{
-	struct sh_keysc_info *pdata = &p->pdata;
-
-	sh_keysc_write(p, KYOUTDR, 0);
-	sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
-
-	if (pdata->kycr2_delay)
-		udelay(pdata->kycr2_delay);
-}
-
-static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
-			     const char *str)
-{
-	int k;
-
-	for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
-		dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
-}
-
-static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
-{
-	struct platform_device *pdev = dev_id;
-	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-	struct sh_keysc_info *pdata = &priv->pdata;
-	int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
-	int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
-	DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
-	DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
-	DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
-	unsigned char keyin_set, tmp;
-	int i, k, n;
-
-	dev_dbg(&pdev->dev, "isr!\n");
-
-	bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
-	bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
-
-	do {
-		bitmap_zero(keys, SH_KEYSC_MAXKEYS);
-		keyin_set = 0;
-
-		sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
-		for (i = 0; i < keyout_nr; i++) {
-			n = keyin_nr * i;
-
-			/* drive one KEYOUT pin low, read KEYIN pins */
-			sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
-			udelay(pdata->delay);
-			tmp = sh_keysc_read(priv, KYINDR);
-
-			/* set bit if key press has been detected */
-			for (k = 0; k < keyin_nr; k++) {
-				if (tmp & (1 << k))
-					__set_bit(n + k, keys);
-			}
-
-			/* keep track of which KEYIN bits that have been set */
-			keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
-		}
-
-		sh_keysc_level_mode(priv, keyin_set);
-
-		bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
-		bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
-		bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
-
-		sh_keysc_map_dbg(&pdev->dev, keys, "keys");
-
-	} while (sh_keysc_read(priv, KYCR2) & 0x01);
-
-	sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
-	sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
-	sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
-
-	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
-		k = pdata->keycodes[i];
-		if (!k)
-			continue;
-
-		if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
-			continue;
-
-		if (test_bit(i, keys1) || test_bit(i, keys0)) {
-			input_event(priv->input, EV_KEY, k, 1);
-			__set_bit(i, priv->last_keys);
-		}
-
-		if (!test_bit(i, keys1)) {
-			input_event(priv->input, EV_KEY, k, 0);
-			__clear_bit(i, priv->last_keys);
-		}
-
-	}
-	input_sync(priv->input);
-
-	return IRQ_HANDLED;
-}
-
-static int sh_keysc_probe(struct platform_device *pdev)
-{
-	struct sh_keysc_priv *priv;
-	struct sh_keysc_info *pdata;
-	struct resource *res;
-	struct input_dev *input;
-	int i;
-	int irq, error;
-
-	if (!dev_get_platdata(&pdev->dev)) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		error = -EINVAL;
-		goto err0;
-	}
-
-	error = -ENXIO;
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to get I/O memory\n");
-		goto err0;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		goto err0;
-
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
-		error = -ENOMEM;
-		goto err0;
-	}
-
-	platform_set_drvdata(pdev, priv);
-	memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
-	pdata = &priv->pdata;
-
-	priv->iomem_base = ioremap(res->start, resource_size(res));
-	if (priv->iomem_base == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -ENXIO;
-		goto err1;
-	}
-
-	priv->input = input_allocate_device();
-	if (!priv->input) {
-		dev_err(&pdev->dev, "failed to allocate input device\n");
-		error = -ENOMEM;
-		goto err2;
-	}
-
-	input = priv->input;
-	input->evbit[0] = BIT_MASK(EV_KEY);
-
-	input->name = pdev->name;
-	input->phys = "sh-keysc-keys/input0";
-	input->dev.parent = &pdev->dev;
-
-	input->id.bustype = BUS_HOST;
-	input->id.vendor = 0x0001;
-	input->id.product = 0x0001;
-	input->id.version = 0x0100;
-
-	input->keycode = pdata->keycodes;
-	input->keycodesize = sizeof(pdata->keycodes[0]);
-	input->keycodemax = ARRAY_SIZE(pdata->keycodes);
-
-	error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
-				     dev_name(&pdev->dev), pdev);
-	if (error) {
-		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto err3;
-	}
-
-	for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
-		__set_bit(pdata->keycodes[i], input->keybit);
-	__clear_bit(KEY_RESERVED, input->keybit);
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err4;
-	}
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
-		       pdata->scan_timing);
-	sh_keysc_level_mode(priv, 0);
-
-	device_init_wakeup(&pdev->dev, 1);
-
-	return 0;
-
- err4:
-	free_irq(irq, pdev);
- err3:
-	input_free_device(input);
- err2:
-	iounmap(priv->iomem_base);
- err1:
-	kfree(priv);
- err0:
-	return error;
-}
-
-static int sh_keysc_remove(struct platform_device *pdev)
-{
-	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-
-	sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
-	input_unregister_device(priv->input);
-	free_irq(platform_get_irq(pdev, 0), pdev);
-	iounmap(priv->iomem_base);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-
-	kfree(priv);
-
-	return 0;
-}
-
-static int sh_keysc_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-	int irq = platform_get_irq(pdev, 0);
-	unsigned short value;
-
-	value = sh_keysc_read(priv, KYCR1);
-
-	if (device_may_wakeup(dev)) {
-		sh_keysc_write(priv, KYCR1, value | 0x80);
-		enable_irq_wake(irq);
-	} else {
-		sh_keysc_write(priv, KYCR1, value & ~0x80);
-		pm_runtime_put_sync(dev);
-	}
-
-	return 0;
-}
-
-static int sh_keysc_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int irq = platform_get_irq(pdev, 0);
-
-	if (device_may_wakeup(dev))
-		disable_irq_wake(irq);
-	else
-		pm_runtime_get_sync(dev);
-
-	return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops,
-				sh_keysc_suspend, sh_keysc_resume);
-
-static struct platform_driver sh_keysc_device_driver = {
-	.probe		= sh_keysc_probe,
-	.remove		= sh_keysc_remove,
-	.driver		= {
-		.name	= "sh_keysc",
-		.pm	= pm_sleep_ptr(&sh_keysc_dev_pm_ops),
-	}
-};
-module_platform_driver(sh_keysc_device_driver);
-
-MODULE_AUTHOR("Magnus Damm");
-MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
-MODULE_LICENSE("GPL");
-- 
2.39.0


  parent reply	other threads:[~2023-01-13  6:27 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-13  6:23 remove arch/sh Christoph Hellwig
2023-01-13  6:23 ` [PATCH 01/22] gpu/drm: remove the shmobile drm driver Christoph Hellwig
2023-01-13  7:46   ` Laurent Pinchart
2023-01-13  7:55     ` Laurent Pinchart
2023-01-13  8:19       ` Geert Uytterhoeven
2023-02-03  7:15     ` Christoph Hellwig
2023-02-03 13:49       ` Laurent Pinchart
2023-02-03 13:53         ` Geert Uytterhoeven
2023-01-13  6:23 ` [PATCH 02/22] usb: remove the dead USB_OHCI_SH option Christoph Hellwig
2023-01-13  7:12   ` Greg Kroah-Hartman
2023-01-13  7:14     ` Christoph Hellwig
2023-01-15  0:55     ` Rob Landley
2023-02-03  7:15     ` Christoph Hellwig
2023-02-03  7:25       ` Greg Kroah-Hartman
2023-01-13  8:59   ` Geert Uytterhoeven
2023-01-13  6:23 ` [PATCH 04/22] sound: remove sound/sh Christoph Hellwig
2023-01-13 16:18   ` Takashi Iwai
2023-01-13  6:23 ` [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers Christoph Hellwig
2023-01-17 22:52   ` Kuninori Morimoto
2023-01-13  6:23 ` [PATCH 06/22] watchdog: remove the shwdt driver Christoph Hellwig
2023-01-13 14:00   ` Guenter Roeck
2023-01-13  6:23 ` [PATCH 07/22] cpufreq: remove the sh-cpufreq driver Christoph Hellwig
2023-01-13  6:23 ` [PATCH 08/22] dmaengine: remove the shdmac driver Christoph Hellwig
2023-01-13  6:23 ` [PATCH 09/22] i2c: remove i2c-sh7760 Christoph Hellwig
2023-01-13  6:23 ` Christoph Hellwig [this message]
2023-01-13  8:28   ` [PATCH 10/22] input: remove sh_keysc Geert Uytterhoeven
2023-01-13  6:23 ` [PATCH 11/22] mtd/nand: remove sh_flctl Christoph Hellwig
2023-01-13  8:30   ` Geert Uytterhoeven
2023-01-13 10:06     ` Arnd Bergmann
2023-01-13  6:23 ` [PATCH 12/22] net/ethernet/8390: remove stnic Christoph Hellwig
2023-01-13  6:23 ` [PATCH 15/22] spi: remove spi-sh Christoph Hellwig
2023-01-13  6:23 ` [PATCH 16/22] spi: remove spi-sh-sci Christoph Hellwig
2023-01-13  8:50   ` Geert Uytterhoeven
2023-01-13  6:23 ` [PATCH 17/22] spi: remove spi-jcore Christoph Hellwig
2023-01-13  6:23 ` [PATCH 18/22] usb: remove ehci-sh Christoph Hellwig
2023-01-13  6:23 ` [PATCH 19/22] fbdev: remove sh7760fb Christoph Hellwig
2023-01-13  8:53   ` Geert Uytterhoeven
2023-01-13  6:23 ` [PATCH 20/22] media: remove sh_vou Christoph Hellwig
2023-01-13  8:01   ` Laurent Pinchart
2023-01-13  9:05     ` Hans Verkuil
2023-01-13  6:23 ` [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device Christoph Hellwig
2023-01-13  6:23 ` [PATCH 22/22] drivers: platform: remove early_platform_cleanup Christoph Hellwig
2023-01-13  8:09 ` remove arch/sh John Paul Adrian Glaubitz
2023-01-13  8:26   ` Geert Uytterhoeven
2023-01-13  8:52     ` John Paul Adrian Glaubitz
2023-01-13 19:11       ` Rob Landley
2023-01-13 19:05         ` John Paul Adrian Glaubitz
2023-01-13 23:32           ` Rob Landley
2023-01-16  7:14     ` Christoph Hellwig
2023-01-16  7:13   ` Christoph Hellwig
2023-01-16  8:52     ` John Paul Adrian Glaubitz
2023-02-03  7:14       ` Christoph Hellwig
2023-02-03  8:24         ` John Paul Adrian Glaubitz
2023-02-03  8:30           ` Christoph Hellwig
2023-02-03 10:29             ` John Paul Adrian Glaubitz
2023-02-03 10:33               ` Geert Uytterhoeven
2023-02-03 10:36                 ` John Paul Adrian Glaubitz
2023-02-03 15:57                 ` Randy Dunlap
2023-02-03 16:04                   ` Geert Uytterhoeven
2023-02-09  3:06                   ` Rob Landley
2023-02-05 23:08             ` Stephen Rothwell
2023-02-05 23:20               ` John Paul Adrian Glaubitz
2023-02-13 16:30               ` John Paul Adrian Glaubitz
2023-02-07  9:06         ` John Paul Adrian Glaubitz
2023-02-08  1:31           ` Randy Dunlap
2023-02-08 12:13             ` John Paul Adrian Glaubitz
2023-02-08 12:24               ` Huacai Chen
2023-02-08 12:37                 ` John Paul Adrian Glaubitz
2023-02-08 14:12                   ` Wolfram Sang
2023-02-09  3:09               ` Rob Landley
2023-02-09  9:15                 ` John Paul Adrian Glaubitz
2023-01-17 19:13     ` Rob Landley
2023-01-17 20:26       ` Geert Uytterhoeven
2023-01-17 23:05         ` Guenter Roeck
2023-01-18  0:10           ` D. Jeff Dionne
2023-01-18  5:03         ` Rob Landley
2023-01-18  7:46           ` Geert Uytterhoeven
2023-01-18 11:14             ` Rob Landley
     [not found] ` <20230113062339.1909087-14-hch@lst.de>
2023-01-13  8:45   ` [PATCH 13/22] pinctrl: remove renesas sh controllers Geert Uytterhoeven
2023-01-13 15:18 ` remove arch/sh Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230113062339.1909087-11-hch@lst.de \
    --to=hch@lst.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=dalias@libc.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).