[PATCH] Fix strange behavior of touchpad on Clevo NS70PU

[PATCH] Fix strange behavior of touchpad on Clevo NS70PU

[Werner Sembach]

When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.

The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
 drivers/input/serio/i8042-acpipnpio.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index efc61736099b9..3a6640a11dd99 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1156,6 +1156,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
 					SERIO_QUIRK_NOPNP)
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
-- 
2.34.1

Re: [PATCH] Fix strange behavior of touchpad on Clevo NS70PU

[Hans de Goede]

Hi,

On 2/20/23 19:30, Werner Sembach wrote:
> When closing the laptop lid with an external screen connected, the mouse
> pointer has a constant movement to the lower right corner. Opening the
> lid again stops this movement, but after that the touchpad does no longer
> register clicks.
> 
> The touchpad is connected both via i2c-hid and PS/2, the predecessor of
> this device (NS70MU) has the same layout in this regard and also strange
> behaviour caused by the psmouse and the i2c-hid driver fighting over
> touchpad control. This fix is reusing the same workaround by just
> disabling the PS/2 aux port, that is only used by the touchpad, to give the
> i2c-hid driver the lone control over the touchpad.
> 
> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> Cc: stable@vger.kernel.org

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans


> ---
>  drivers/input/serio/i8042-acpipnpio.h | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
> index efc61736099b9..3a6640a11dd99 100644
> --- a/drivers/input/serio/i8042-acpipnpio.h
> +++ b/drivers/input/serio/i8042-acpipnpio.h
> @@ -1156,6 +1156,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
>  					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
>  					SERIO_QUIRK_NOPNP)
>  	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
> +		},
> +		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
> +	},
>  	{
>  		.matches = {
>  			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),

Re: [PATCH] Fix strange behavior of touchpad on Clevo NS70PU

[Werner Sembach]

Hi,

I just checked and saw that this never got merged. So I wanted to gently bump it.

Kind regards,

Werner Sembach

Re: [PATCH] Fix strange behavior of touchpad on Clevo NS70PU

[Mattijs Korpershoek]

On lun., févr. 20, 2023 at 19:30, Werner Sembach <wse@tuxedocomputers.com> wrote:

> When closing the laptop lid with an external screen connected, the mouse
> pointer has a constant movement to the lower right corner. Opening the
> lid again stops this movement, but after that the touchpad does no longer
> register clicks.
>
> The touchpad is connected both via i2c-hid and PS/2, the predecessor of
> this device (NS70MU) has the same layout in this regard and also strange
> behaviour caused by the psmouse and the i2c-hid driver fighting over
> touchpad control. This fix is reusing the same workaround by just
> disabling the PS/2 aux port, that is only used by the touchpad, to give the
> i2c-hid driver the lone control over the touchpad.
>
> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> Cc: stable@vger.kernel.org

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> ---
>  drivers/input/serio/i8042-acpipnpio.h | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
> index efc61736099b9..3a6640a11dd99 100644
> --- a/drivers/input/serio/i8042-acpipnpio.h
> +++ b/drivers/input/serio/i8042-acpipnpio.h
> @@ -1156,6 +1156,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
>  					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
>  					SERIO_QUIRK_NOPNP)
>  	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
> +		},
> +		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
> +	},
>  	{
>  		.matches = {
>  			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
> -- 
> 2.34.1