[PATCH AUTOSEL 6.2 07/60] HID: Add Mapping for System Microphone Mute

[PATCH AUTOSEL 6.2 07/60] HID: Add Mapping for System Microphone Mute

[Sasha Levin]

From: Jingyuan Liang <jingyliang@chromium.org>

[ Upstream commit 2d60f9f4f26785a00273cb81fe60eff129ebd449 ]

HUTRR110 added a new usage code for a key that is supposed to
mute/unmute microphone system-wide.

Map the new usage code(0x01 0xa9) to keycode KEY_MICMUTE.
Additionally hid-debug is adjusted to recognize this keycode as well.

Signed-off-by: Jingyuan Liang <jingyliang@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-debug.c | 1 +
 drivers/hid/hid-input.c | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index e213bdde543af..e7ef1ea107c9e 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -975,6 +975,7 @@ static const char *keys[KEY_MAX + 1] = {
 	[KEY_CAMERA_ACCESS_DISABLE] = "CameraAccessDisable",
 	[KEY_CAMERA_ACCESS_TOGGLE] = "CameraAccessToggle",
 	[KEY_DICTATE] = "Dictate",
+	[KEY_MICMUTE] = "MicrophoneMute",
 	[KEY_BRIGHTNESS_MIN] = "BrightnessMin",
 	[KEY_BRIGHTNESS_MAX] = "BrightnessMax",
 	[KEY_BRIGHTNESS_AUTO] = "BrightnessAuto",
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 77c8c49852b5c..bd0cfccfb7a25 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -793,6 +793,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			break;
 		}
 
+		if ((usage->hid & 0xf0) == 0xa0) {	/* SystemControl */
+			switch (usage->hid & 0xf) {
+			case 0x9: map_key_clear(KEY_MICMUTE); break;
+			default: goto ignore;
+			}
+			break;
+		}
+
 		if ((usage->hid & 0xf0) == 0xb0) {	/* SC - Display */
 			switch (usage->hid & 0xf) {
 			case 0x05: map_key_clear(KEY_SWITCHVIDEOMODE); break;
-- 
2.39.0

[PATCH AUTOSEL 6.2 19/60] HID: uclogic: Add frame type quirk

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit 14b71e6ad8ca59dd734c7fa9676f3d60bddee2a9 ]

The report descriptor used to get information about UGEE v2 devices is
incorrect in the XP-PEN Deco Pro SW. It indicates that the device frame
is of type UCLOGIC_PARAMS_FRAME_BUTTONS but the device has a frame of
type UCLOGIC_PARAMS_FRAME_MOUSE.

Here is the original report descriptor:

  0x0e 0x03 0xc8 0xb3 0x34 0x65 0x08 0x00 0xff 0x1f 0xd8 0x13 0x00 0x00
                                     ^ This byte should be 2

Add a quirk to be able to fix the reported frame type.

Tested-by: Mia Kanashi <chad@redpilled.dev>
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-uclogic-core.c   | 20 +-------------------
 drivers/hid/hid-uclogic-params.c |  5 +++++
 drivers/hid/hid-uclogic-params.h | 23 +++++++++++++++++++++++
 3 files changed, 29 insertions(+), 19 deletions(-)

diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index cfbbc39807a69..739984b8fa1b8 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -22,25 +22,6 @@
 
 #include "hid-ids.h"
 
-/* Driver data */
-struct uclogic_drvdata {
-	/* Interface parameters */
-	struct uclogic_params params;
-	/* Pointer to the replacement report descriptor. NULL if none. */
-	__u8 *desc_ptr;
-	/*
-	 * Size of the replacement report descriptor.
-	 * Only valid if desc_ptr is not NULL
-	 */
-	unsigned int desc_size;
-	/* Pen input device */
-	struct input_dev *pen_input;
-	/* In-range timer */
-	struct timer_list inrange_timer;
-	/* Last rotary encoder state, or U8_MAX for none */
-	u8 re_state;
-};
-
 /**
  * uclogic_inrange_timeout - handle pen in-range state timeout.
  * Emulate input events normally generated when pen goes out of range for
@@ -202,6 +183,7 @@ static int uclogic_probe(struct hid_device *hdev,
 	}
 	timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0);
 	drvdata->re_state = U8_MAX;
+	drvdata->quirks = id->driver_data;
 	hid_set_drvdata(hdev, drvdata);
 
 	/* Initialize the device and retrieve interface parameters */
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 3c5eea3df3288..e052538a62fb3 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1298,6 +1298,7 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 				       struct hid_device *hdev)
 {
 	int rc = 0;
+	struct uclogic_drvdata *drvdata;
 	struct usb_interface *iface;
 	__u8 bInterfaceNumber;
 	const int str_desc_len = 12;
@@ -1316,6 +1317,7 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 		goto cleanup;
 	}
 
+	drvdata = hid_get_drvdata(hdev);
 	iface = to_usb_interface(hdev->dev.parent);
 	bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
 
@@ -1382,6 +1384,9 @@ static int uclogic_params_ugee_v2_init(struct uclogic_params *params,
 	p.pen.subreport_list[0].id = UCLOGIC_RDESC_V1_FRAME_ID;
 
 	/* Initialize the frame interface */
+	if (drvdata->quirks & UCLOGIC_MOUSE_FRAME_QUIRK)
+		frame_type = UCLOGIC_PARAMS_FRAME_MOUSE;
+
 	switch (frame_type) {
 	case UCLOGIC_PARAMS_FRAME_DIAL:
 	case UCLOGIC_PARAMS_FRAME_MOUSE:
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index a97477c02ff82..10a05c7fd9398 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -19,6 +19,8 @@
 #include <linux/usb.h>
 #include <linux/hid.h>
 
+#define UCLOGIC_MOUSE_FRAME_QUIRK	BIT(0)
+
 /* Types of pen in-range reporting */
 enum uclogic_params_pen_inrange {
 	/* Normal reports: zero - out of proximity, one - in proximity */
@@ -215,6 +217,27 @@ struct uclogic_params {
 	struct uclogic_params_frame frame_list[3];
 };
 
+/* Driver data */
+struct uclogic_drvdata {
+	/* Interface parameters */
+	struct uclogic_params params;
+	/* Pointer to the replacement report descriptor. NULL if none. */
+	__u8 *desc_ptr;
+	/*
+	 * Size of the replacement report descriptor.
+	 * Only valid if desc_ptr is not NULL
+	 */
+	unsigned int desc_size;
+	/* Pen input device */
+	struct input_dev *pen_input;
+	/* In-range timer */
+	struct timer_list inrange_timer;
+	/* Last rotary encoder state, or U8_MAX for none */
+	u8 re_state;
+	/* Device quirks */
+	unsigned long quirks;
+};
+
 /* Initialize a tablet interface and discover its parameters */
 extern int uclogic_params_init(struct uclogic_params *params,
 				struct hid_device *hdev);
-- 
2.39.0

[PATCH AUTOSEL 6.2 20/60] HID: uclogic: Add battery quirk

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit f60c377f52de37f8705c5fc6d57737fdaf309ff9 ]

Some UGEE v2 tablets have a wireless version with an internal battery
and their firmware is able to report their battery level.

However, there was not found a field on their descriptor indicating
whether the tablet has battery or not, making it mandatory to classify
such devices through the UCLOGIC_BATTERY_QUIRK quirk.

Tested-by: Mia Kanashi <chad@redpilled.dev>
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-uclogic-params.c | 5 +++++
 drivers/hid/hid-uclogic-params.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index e052538a62fb3..23624d5b07b5a 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1222,6 +1222,11 @@ static int uclogic_params_ugee_v2_init_frame_mouse(struct uclogic_params *p)
  */
 static bool uclogic_params_ugee_v2_has_battery(struct hid_device *hdev)
 {
+	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & UCLOGIC_BATTERY_QUIRK)
+		return true;
+
 	/* The XP-PEN Deco LW vendor, product and version are identical to the
 	 * Deco L. The only difference reported by their firmware is the product
 	 * name. Add a quirk to support battery reporting on the wireless
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index 10a05c7fd9398..b0e7f3807939b 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -20,6 +20,7 @@
 #include <linux/hid.h>
 
 #define UCLOGIC_MOUSE_FRAME_QUIRK	BIT(0)
+#define UCLOGIC_BATTERY_QUIRK		BIT(1)
 
 /* Types of pen in-range reporting */
 enum uclogic_params_pen_inrange {
-- 
2.39.0

[PATCH AUTOSEL 6.2 21/60] HID: uclogic: Add support for XP-PEN Deco Pro SW

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit 7744ca571af55b794595cff2da9d51a26904998f ]

The XP-PEN Deco Pro SW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse; however, the UCLOGIC_MOUSE_FRAME_QUIRK is
required because it reports an incorrect frame type. Its pen has 2
buttons, supports tilt and pressure.

It can be connected using a USB cable or, to use it in wireless mode,
using a USB Bluetooth dongle. When it is connected in wireless mode the
device battery is used to power it.

All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-input.c          | 2 ++
 drivers/hid/hid-uclogic-core.c   | 3 +++
 drivers/hid/hid-uclogic-params.c | 2 ++
 4 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 9e36b4cd905ee..c662994d73381 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1300,6 +1300,7 @@
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2	0x0905
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L	0x0935
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S	0x0909
+#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW	0x0933
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06	0x0078
 #define USB_DEVICE_ID_UGEE_TABLET_G5		0x0074
 #define USB_DEVICE_ID_UGEE_TABLET_EX07S		0x0071
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index bd0cfccfb7a25..0f8a5152e48b1 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -378,6 +378,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L),
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
+	  HID_BATTERY_QUIRK_AVOID_QUERY },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15),
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15T_DR100),
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 739984b8fa1b8..7c05d38d3afad 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -513,6 +513,9 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
+		.driver_data = UCLOGIC_MOUSE_FRAME_QUIRK | UCLOGIC_BATTERY_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06) },
 	{ }
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 23624d5b07b5a..492a30f83575a 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1671,6 +1671,8 @@ int uclogic_params_init(struct uclogic_params *params,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L):
 	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S):
+	case VID_PID(USB_VENDOR_ID_UGEE,
+		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW):
 		rc = uclogic_params_ugee_v2_init(&p, hdev);
 		if (rc != 0)
 			goto cleanup;
-- 
2.39.0

[PATCH AUTOSEL 6.2 22/60] HID: uclogic: Add support for XP-PEN Deco Pro MW

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit 9266a88156d1fbb8e50d6eeff7bac44ad4eaecc2 ]

The XP-PEN Deco Pro MW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and
pressure.

It can be connected using a USB cable or, to use it in wireless mode,
using a USB Bluetooth dongle. When it is connected in wireless mode the
device battery is used to power it.

All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.

Link: https://github.com/DIGImend/digimend-kernel-drivers/issues/622
Tested-by: Andreas Grosse <andig.mail@t-online.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-input.c          | 2 ++
 drivers/hid/hid-uclogic-core.c   | 3 +++
 drivers/hid/hid-uclogic-params.c | 2 ++
 4 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index c662994d73381..2235d78784b1b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1299,6 +1299,7 @@
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01	0x0042
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2	0x0905
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L	0x0935
+#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW	0x0934
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S	0x0909
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW	0x0933
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06	0x0078
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 0f8a5152e48b1..c3c7d0abb01ad 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -378,6 +378,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L),
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW),
+	  HID_BATTERY_QUIRK_AVOID_QUERY },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15),
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 7c05d38d3afad..bfbb51f8b5beb 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -511,6 +511,9 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW),
+		.driver_data = UCLOGIC_MOUSE_FRAME_QUIRK | UCLOGIC_BATTERY_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 492a30f83575a..0cc03c11ecc22 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -1669,6 +1669,8 @@ int uclogic_params_init(struct uclogic_params *params,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01_V2):
 	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L):
+	case VID_PID(USB_VENDOR_ID_UGEE,
+		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_MW):
 	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S):
 	case VID_PID(USB_VENDOR_ID_UGEE,
-- 
2.39.0

[PATCH AUTOSEL 6.2 23/60] HID: multitouch: Add quirks for flipped axes

[Sasha Levin]

From: Allen Ballway <ballway@chromium.org>

[ Upstream commit a2f416bf062a38bb76cccd526d2d286b8e4db4d9 ]

Certain touchscreen devices, such as the ELAN9034, are oriented
incorrectly and report touches on opposite points on the X and Y axes.
For example, a 100x200 screen touched at (10,20) would report (90, 180)
and vice versa.

This is fixed by adding device quirks to transform the touch points
into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.

Signed-off-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-multitouch.c             | 39 ++++++++++++++++++---
 drivers/hid/hid-quirks.c                 |  6 ++++
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 43 ++++++++++++++++++++++++
 drivers/hid/i2c-hid/i2c-hid.h            |  3 ++
 4 files changed, 87 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 372cbdd223e09..e31be0cb8b850 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -71,6 +71,7 @@ MODULE_LICENSE("GPL");
 #define MT_QUIRK_SEPARATE_APP_REPORT	BIT(19)
 #define MT_QUIRK_FORCE_MULTI_INPUT	BIT(20)
 #define MT_QUIRK_DISABLE_WAKEUP		BIT(21)
+#define MT_QUIRK_ORIENTATION_INVERT	BIT(22)
 
 #define MT_INPUTMODE_TOUCHSCREEN	0x02
 #define MT_INPUTMODE_TOUCHPAD		0x03
@@ -1009,6 +1010,7 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 			    struct mt_usages *slot)
 {
 	struct input_mt *mt = input->mt;
+	struct hid_device *hdev = td->hdev;
 	__s32 quirks = app->quirks;
 	bool valid = true;
 	bool confidence_state = true;
@@ -1086,6 +1088,10 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 		int orientation = wide;
 		int max_azimuth;
 		int azimuth;
+		int x;
+		int y;
+		int cx;
+		int cy;
 
 		if (slot->a != DEFAULT_ZERO) {
 			/*
@@ -1104,6 +1110,9 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 			if (azimuth > max_azimuth * 2)
 				azimuth -= max_azimuth * 4;
 			orientation = -azimuth;
+			if (quirks & MT_QUIRK_ORIENTATION_INVERT)
+				orientation = -orientation;
+
 		}
 
 		if (quirks & MT_QUIRK_TOUCH_SIZE_SCALING) {
@@ -1115,10 +1124,23 @@ static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 			minor = minor >> 1;
 		}
 
-		input_event(input, EV_ABS, ABS_MT_POSITION_X, *slot->x);
-		input_event(input, EV_ABS, ABS_MT_POSITION_Y, *slot->y);
-		input_event(input, EV_ABS, ABS_MT_TOOL_X, *slot->cx);
-		input_event(input, EV_ABS, ABS_MT_TOOL_Y, *slot->cy);
+		x = hdev->quirks & HID_QUIRK_X_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_X) - *slot->x :
+			*slot->x;
+		y = hdev->quirks & HID_QUIRK_Y_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_Y) - *slot->y :
+			*slot->y;
+		cx = hdev->quirks & HID_QUIRK_X_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_X) - *slot->cx :
+			*slot->cx;
+		cy = hdev->quirks & HID_QUIRK_Y_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_Y) - *slot->cy :
+			*slot->cy;
+
+		input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
+		input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
+		input_event(input, EV_ABS, ABS_MT_TOOL_X, cx);
+		input_event(input, EV_ABS, ABS_MT_TOOL_Y, cy);
 		input_event(input, EV_ABS, ABS_MT_DISTANCE, !*slot->tip_state);
 		input_event(input, EV_ABS, ABS_MT_ORIENTATION, orientation);
 		input_event(input, EV_ABS, ABS_MT_PRESSURE, *slot->p);
@@ -1735,6 +1757,15 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
 		td->serial_maybe = true;
 
+
+	/* Orientation is inverted if the X or Y axes are
+	 * flipped, but normalized if both are inverted.
+	 */
+	if (hdev->quirks & (HID_QUIRK_X_INVERT | HID_QUIRK_Y_INVERT) &&
+	    !((hdev->quirks & HID_QUIRK_X_INVERT)
+	      && (hdev->quirks & HID_QUIRK_Y_INVERT)))
+		td->mtclass.quirks = MT_QUIRK_ORIENTATION_INVERT;
+
 	/* This allows the driver to correctly support devices
 	 * that emit events over several HID messages.
 	 */
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 5bc91f68b3747..30e35f79def47 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -19,6 +19,7 @@
 #include <linux/input/elan-i2c-ids.h>
 
 #include "hid-ids.h"
+#include "i2c-hid/i2c-hid.h"
 
 /*
  * Alphabetically sorted by vendor then product.
@@ -1298,6 +1299,11 @@ unsigned long hid_lookup_quirk(const struct hid_device *hdev)
 		quirks = hid_gets_squirk(hdev);
 	mutex_unlock(&dquirks_lock);
 
+	/* Get quirks specific to I2C devices */
+	if (IS_ENABLED(CONFIG_I2C_DMI_CORE) && IS_ENABLED(CONFIG_DMI) &&
+	    hdev->bus == BUS_I2C)
+		quirks |= i2c_hid_get_dmi_quirks(hdev->vendor, hdev->product);
+
 	return quirks;
 }
 EXPORT_SYMBOL_GPL(hid_lookup_quirk);
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
index 8e0f67455c098..554a7dc285365 100644
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -10,8 +10,10 @@
 #include <linux/types.h>
 #include <linux/dmi.h>
 #include <linux/mod_devicetable.h>
+#include <linux/hid.h>
 
 #include "i2c-hid.h"
+#include "../hid-ids.h"
 
 
 struct i2c_hid_desc_override {
@@ -416,6 +418,28 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
 	{ }	/* Terminate list */
 };
 
+static const struct hid_device_id i2c_hid_elan_flipped_quirks = {
+	HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, USB_VENDOR_ID_ELAN, 0x2dcd),
+		HID_QUIRK_X_INVERT | HID_QUIRK_Y_INVERT
+};
+
+/*
+ * This list contains devices which have specific issues based on the system
+ * they're on and not just the device itself. The driver_data will have a
+ * specific hid device to match against.
+ */
+static const struct dmi_system_id i2c_hid_dmi_quirk_table[] = {
+	{
+		.ident = "DynaBook K50/FR",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dynabook Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "dynabook K50/FR"),
+		},
+		.driver_data = (void *)&i2c_hid_elan_flipped_quirks,
+	},
+	{ }	/* Terminate list */
+};
+
 
 struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
 {
@@ -450,3 +474,22 @@ char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 	*size = override->hid_report_desc_size;
 	return override->hid_report_desc;
 }
+
+u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
+{
+	u32 quirks = 0;
+	const struct dmi_system_id *system_id =
+			dmi_first_match(i2c_hid_dmi_quirk_table);
+
+	if (system_id) {
+		const struct hid_device_id *device_id =
+				(struct hid_device_id *)(system_id->driver_data);
+
+		if (device_id && device_id->vendor == vendor &&
+		    device_id->product == product)
+			quirks = device_id->driver_data;
+	}
+
+	return quirks;
+}
+EXPORT_SYMBOL_GPL(i2c_hid_get_dmi_quirks);
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 96c75510ad3f1..2c7b66d5caa0f 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -9,6 +9,7 @@
 struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name);
 char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 					       unsigned int *size);
+u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product);
 #else
 static inline struct i2c_hid_desc
 		   *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
@@ -16,6 +17,8 @@ static inline struct i2c_hid_desc
 static inline char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 							     unsigned int *size)
 { return NULL; }
+static inline u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
+{ return 0; }
 #endif
 
 /**
-- 
2.39.0

[PATCH AUTOSEL 6.2 49/60] HID: logitech-hidpp: Don't restart communication if not necessary

[Sasha Levin]

From: Bastien Nocera <hadess@hadess.net>

[ Upstream commit 498ba20690357691103de0f766960355247c78be ]

Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 9c1ee8e91e0ca..0b6400d6dc837 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4107,6 +4107,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	bool connected;
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 	struct hidpp_ff_private_data data;
+	bool will_restart = false;
 
 	/* report_fixup needs drvdata to be set before we call hid_parse */
 	hidpp = devm_kzalloc(&hdev->dev, sizeof(*hidpp), GFP_KERNEL);
@@ -4162,6 +4163,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			return ret;
 	}
 
+	if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT ||
+	    hidpp->quirks & HIDPP_QUIRK_UNIFYING)
+		will_restart = true;
+
 	INIT_WORK(&hidpp->work, delayed_work_cb);
 	mutex_init(&hidpp->send_mutex);
 	init_waitqueue_head(&hidpp->wait);
@@ -4176,7 +4181,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	 * Plain USB connections need to actually call start and open
 	 * on the transport driver to allow incoming data.
 	 */
-	ret = hid_hw_start(hdev, 0);
+	ret = hid_hw_start(hdev, will_restart ? 0 : connect_mask);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
 		goto hid_hw_start_fail;
@@ -4213,6 +4218,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			hidpp->wireless_feature_index = 0;
 		else if (ret)
 			goto hid_hw_init_fail;
+		ret = 0;
 	}
 
 	if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
@@ -4227,19 +4233,21 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	hidpp_connect_event(hidpp);
 
-	/* Reset the HID node state */
-	hid_device_io_stop(hdev);
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
+	if (will_restart) {
+		/* Reset the HID node state */
+		hid_device_io_stop(hdev);
+		hid_hw_close(hdev);
+		hid_hw_stop(hdev);
 
-	if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
-		connect_mask &= ~HID_CONNECT_HIDINPUT;
+		if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
+			connect_mask &= ~HID_CONNECT_HIDINPUT;
 
-	/* Now export the actual inputs and hidraw nodes to the world */
-	ret = hid_hw_start(hdev, connect_mask);
-	if (ret) {
-		hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
-		goto hid_hw_start_fail;
+		/* Now export the actual inputs and hidraw nodes to the world */
+		ret = hid_hw_start(hdev, connect_mask);
+		if (ret) {
+			hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+			goto hid_hw_start_fail;
+		}
 	}
 
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
-- 
2.39.0