From: Hans de Goede <hdegoede@redhat.com>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Douglas Anderson <dianders@chromium.org>
Cc: Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org
Subject: [PATCH 3/6] HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of
Date: Sun, 9 Apr 2023 16:42:40 +0200 [thread overview]
Message-ID: <20230409144243.25360-4-hdegoede@redhat.com> (raw)
In-Reply-To: <20230409144243.25360-1-hdegoede@redhat.com>
Add reset GPIO support to the generic i2c-hid-of driver
This is necessary to make the Wacom digitizer on the Lenovo Yoga Book 1
(yb1-x90f/l) work and this will also allow consolidating the 2 specialized
i2c-hid-of-elan.c and i2c-hid-of-goodix.c drivers into the generic
i2c-hid-of driver.
For now the new "post-reset-deassert-delay-ms" property is only used on
x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree
files and the same goes for the reset GPIO. The devicetree-bindings
maintainers have requested properties like these to not be added to
the devicetree-bindings, so the new property + GPIO are deliberately
not added to the existing devicetree-bindings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/hid/i2c-hid/i2c-hid-of.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index 385f7460e03c..d0289afa57dc 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gpio/consumer.h>
#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
@@ -35,8 +36,10 @@ struct i2c_hid_of {
struct i2chid_ops ops;
struct i2c_client *client;
+ struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[2];
int post_power_delay_ms;
+ int post_reset_delay_ms;
};
static int i2c_hid_of_power_up(struct i2chid_ops *ops)
@@ -55,6 +58,10 @@ static int i2c_hid_of_power_up(struct i2chid_ops *ops)
if (ihid_of->post_power_delay_ms)
msleep(ihid_of->post_power_delay_ms);
+ gpiod_set_value_cansleep(ihid_of->reset_gpio, 0);
+ if (ihid_of->post_reset_delay_ms)
+ msleep(ihid_of->post_reset_delay_ms);
+
return 0;
}
@@ -62,6 +69,7 @@ static void i2c_hid_of_power_down(struct i2chid_ops *ops)
{
struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops);
+ gpiod_set_value_cansleep(ihid_of->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(ihid_of->supplies),
ihid_of->supplies);
}
@@ -96,6 +104,14 @@ static int i2c_hid_of_probe(struct i2c_client *client)
if (!device_property_read_u32(dev, "post-power-on-delay-ms", &val))
ihid_of->post_power_delay_ms = val;
+ if (!device_property_read_u32(dev, "post-reset-deassert-delay-ms", &val))
+ ihid_of->post_reset_delay_ms = val;
+
+ /* Start out with reset asserted */
+ ihid_of->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ihid_of->reset_gpio))
+ return PTR_ERR(ihid_of->reset_gpio);
+
ihid_of->supplies[0].supply = "vdd";
ihid_of->supplies[1].supply = "vddl";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ihid_of->supplies),
--
2.39.1
next prev parent reply other threads:[~2023-04-09 14:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-09 14:42 [PATCH 0/6] HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms + remove specialized drivers Hans de Goede
2023-04-09 14:42 ` [PATCH 1/6] HID: i2c-hid-of: Consistenly use dev local variable in probe() Hans de Goede
2023-04-09 14:42 ` [PATCH 2/6] HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms Hans de Goede
2023-04-09 14:42 ` Hans de Goede [this message]
2023-04-09 14:42 ` [PATCH 4/6] HID: i2c-hid-of: Add chip_data struct Hans de Goede
2023-04-09 14:42 ` [PATCH 5/6] HID: i2c-hid-of: Consolidate Elan support into generic i2c-hid-of driver Hans de Goede
2023-04-09 14:42 ` [PATCH 6/6] HID: i2c-hid-of: Consolidate Goodix " Hans de Goede
2023-04-11 9:02 ` [PATCH 0/6] HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms + remove specialized drivers Benjamin Tissoires
2023-04-11 10:18 ` Hans de Goede
2023-04-11 12:50 ` Benjamin Tissoires
2023-04-11 16:00 ` Hans de Goede
2023-04-11 16:56 ` Benjamin Tissoires
2023-04-11 17:28 ` Hans de Goede
2023-04-12 17:18 ` Benjamin Tissoires
2023-04-12 18:57 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230409144243.25360-4-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dianders@chromium.org \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).