[PATCH 2/7] HID: amd_sfh: Correct the sensor enable and disable command

[Basavaraj Natikar <Basavaraj.Natikar@amd.com>]

In order to start or stop sensors, the firmware command needs to be
changed to add an additional default subcommand value. For this reason,
add a subcommand value to enable or disable sensors accordingly.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
---
 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
index c6df959ec725..6e19ccc12450 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
@@ -33,6 +33,7 @@ static void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor
 	cmd_base.ul = 0;
 	cmd_base.cmd.cmd_id = ENABLE_SENSOR;
 	cmd_base.cmd.intr_disable = 0;
+	cmd_base.cmd.sub_cmd_value = 1;
 	cmd_base.cmd.sensor_id = info.sensor_idx;
 
 	writel(cmd_base.ul, privdata->mmio + AMD_C2P_MSG(0));
@@ -45,6 +46,7 @@ static void amd_stop_sensor(struct amd_mp2_dev *privdata, u16 sensor_idx)
 	cmd_base.ul = 0;
 	cmd_base.cmd.cmd_id = DISABLE_SENSOR;
 	cmd_base.cmd.intr_disable = 0;
+	cmd_base.cmd.sub_cmd_value = 1;
 	cmd_base.cmd.sensor_id = sensor_idx;
 
 	writeq(0x0, privdata->mmio + AMD_C2P_MSG(1));
-- 
2.25.1