[PATCH 1/2] Input: tps65219-pwrbutton - Convert to .remove_new()

[PATCH 1/2] Input: tps65219-pwrbutton - Convert to .remove_new()

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning).

To improve here there is a quest to make the remove callback return void.
In the first step of this quest all drivers are converted to .remove_new()
which already returns void. Eventually after all drivers are converted,
.remove_new() is renamed to .remove().

Before this driver might have returned an error. In this case emit a
warning that tells more about the problem than the generic warning by
the core, and instead of making the remove callback return zero
unconditionally, convert to .remove_new() which is equivalent.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/input/misc/tps65219-pwrbutton.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/input/misc/tps65219-pwrbutton.c b/drivers/input/misc/tps65219-pwrbutton.c
index 245134bdb59e..b2d9e5d2bcfd 100644
--- a/drivers/input/misc/tps65219-pwrbutton.c
+++ b/drivers/input/misc/tps65219-pwrbutton.c
@@ -117,14 +117,17 @@ static int tps65219_pb_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int tps65219_pb_remove(struct platform_device *pdev)
+static void tps65219_pb_remove(struct platform_device *pdev)
 {
 	struct tps65219 *tps = dev_get_drvdata(pdev->dev.parent);
+	int ret;
 
 	/* Disable interrupt for the pushbutton */
-	return regmap_update_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
-				  TPS65219_REG_MASK_INT_FOR_PB_MASK,
-				  TPS65219_REG_MASK_INT_FOR_PB_MASK);
+	ret = regmap_update_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
+				 TPS65219_REG_MASK_INT_FOR_PB_MASK,
+				 TPS65219_REG_MASK_INT_FOR_PB_MASK);
+	if (ret)
+		dev_warn(&pdev->dev, "Failed to disable irq (%pe)\n", ERR_PTR(ret));
 }
 
 static const struct platform_device_id tps65219_pwrbtn_id_table[] = {
@@ -135,7 +138,7 @@ MODULE_DEVICE_TABLE(platform, tps65219_pwrbtn_id_table);
 
 static struct platform_driver tps65219_pb_driver = {
 	.probe = tps65219_pb_probe,
-	.remove = tps65219_pb_remove,
+	.remove_new = tps65219_pb_remove,
 	.driver = {
 		.name = "tps65219_pwrbutton",
 	},

base-commit: ac9a78681b921877518763ba0e89202254349d1b
-- 
2.39.2

[PATCH 2/2] Input: tps65219-pwrbutton - Use regmap_set_bits()

[Uwe Kleine-König]

regmap_set_bits() is equivalent to regmap_update_bits() if mask == val.
The probe function uses regmap_clear_bits() to enable irqs, so
symmetrically make use of regmap_set_bits() to disable them. There is no
semantic difference.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/input/misc/tps65219-pwrbutton.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/input/misc/tps65219-pwrbutton.c b/drivers/input/misc/tps65219-pwrbutton.c
index b2d9e5d2bcfd..eeb9f2334ab4 100644
--- a/drivers/input/misc/tps65219-pwrbutton.c
+++ b/drivers/input/misc/tps65219-pwrbutton.c
@@ -123,9 +123,8 @@ static void tps65219_pb_remove(struct platform_device *pdev)
 	int ret;
 
 	/* Disable interrupt for the pushbutton */
-	ret = regmap_update_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
-				 TPS65219_REG_MASK_INT_FOR_PB_MASK,
-				 TPS65219_REG_MASK_INT_FOR_PB_MASK);
+	ret = regmap_set_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
+			      TPS65219_REG_MASK_INT_FOR_PB_MASK);
 	if (ret)
 		dev_warn(&pdev->dev, "Failed to disable irq (%pe)\n", ERR_PTR(ret));
 }
-- 
2.39.2

Re: [PATCH 2/2] Input: tps65219-pwrbutton - Use regmap_set_bits()

[Markus Schneider-Pargmann]

On Mon, Jun 05, 2023 at 06:14:58PM +0200, Uwe Kleine-König wrote:
> regmap_set_bits() is equivalent to regmap_update_bits() if mask == val.
> The probe function uses regmap_clear_bits() to enable irqs, so
> symmetrically make use of regmap_set_bits() to disable them. There is no
> semantic difference.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>

Best,
Markus

> ---
>  drivers/input/misc/tps65219-pwrbutton.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/misc/tps65219-pwrbutton.c b/drivers/input/misc/tps65219-pwrbutton.c
> index b2d9e5d2bcfd..eeb9f2334ab4 100644
> --- a/drivers/input/misc/tps65219-pwrbutton.c
> +++ b/drivers/input/misc/tps65219-pwrbutton.c
> @@ -123,9 +123,8 @@ static void tps65219_pb_remove(struct platform_device *pdev)
>  	int ret;
>  
>  	/* Disable interrupt for the pushbutton */
> -	ret = regmap_update_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
> -				 TPS65219_REG_MASK_INT_FOR_PB_MASK,
> -				 TPS65219_REG_MASK_INT_FOR_PB_MASK);
> +	ret = regmap_set_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
> +			      TPS65219_REG_MASK_INT_FOR_PB_MASK);
>  	if (ret)
>  		dev_warn(&pdev->dev, "Failed to disable irq (%pe)\n", ERR_PTR(ret));
>  }
> -- 
> 2.39.2
> 

Re: [PATCH 2/2] Input: tps65219-pwrbutton - Use regmap_set_bits()

[Dmitry Torokhov]

On Mon, Jun 05, 2023 at 06:14:58PM +0200, Uwe Kleine-König wrote:
> regmap_set_bits() is equivalent to regmap_update_bits() if mask == val.
> The probe function uses regmap_clear_bits() to enable irqs, so
> symmetrically make use of regmap_set_bits() to disable them. There is no
> semantic difference.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Applied, thank you.

-- 
Dmitry

Re: [PATCH 1/2] Input: tps65219-pwrbutton - Convert to .remove_new()

[Markus Schneider-Pargmann]

Hi Uwe,

On Mon, Jun 05, 2023 at 06:14:57PM +0200, Uwe Kleine-König wrote:
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart from
> emitting a warning).
> 
> To improve here there is a quest to make the remove callback return void.
> In the first step of this quest all drivers are converted to .remove_new()
> which already returns void. Eventually after all drivers are converted,
> .remove_new() is renamed to .remove().
> 
> Before this driver might have returned an error. In this case emit a
> warning that tells more about the problem than the generic warning by
> the core, and instead of making the remove callback return zero
> unconditionally, convert to .remove_new() which is equivalent.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>

Thanks,
Markus

> ---
>  drivers/input/misc/tps65219-pwrbutton.c | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/input/misc/tps65219-pwrbutton.c b/drivers/input/misc/tps65219-pwrbutton.c
> index 245134bdb59e..b2d9e5d2bcfd 100644
> --- a/drivers/input/misc/tps65219-pwrbutton.c
> +++ b/drivers/input/misc/tps65219-pwrbutton.c
> @@ -117,14 +117,17 @@ static int tps65219_pb_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int tps65219_pb_remove(struct platform_device *pdev)
> +static void tps65219_pb_remove(struct platform_device *pdev)
>  {
>  	struct tps65219 *tps = dev_get_drvdata(pdev->dev.parent);
> +	int ret;
>  
>  	/* Disable interrupt for the pushbutton */
> -	return regmap_update_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
> -				  TPS65219_REG_MASK_INT_FOR_PB_MASK,
> -				  TPS65219_REG_MASK_INT_FOR_PB_MASK);
> +	ret = regmap_update_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
> +				 TPS65219_REG_MASK_INT_FOR_PB_MASK,
> +				 TPS65219_REG_MASK_INT_FOR_PB_MASK);
> +	if (ret)
> +		dev_warn(&pdev->dev, "Failed to disable irq (%pe)\n", ERR_PTR(ret));
>  }
>  
>  static const struct platform_device_id tps65219_pwrbtn_id_table[] = {
> @@ -135,7 +138,7 @@ MODULE_DEVICE_TABLE(platform, tps65219_pwrbtn_id_table);
>  
>  static struct platform_driver tps65219_pb_driver = {
>  	.probe = tps65219_pb_probe,
> -	.remove = tps65219_pb_remove,
> +	.remove_new = tps65219_pb_remove,
>  	.driver = {
>  		.name = "tps65219_pwrbutton",
>  	},
> 
> base-commit: ac9a78681b921877518763ba0e89202254349d1b
> -- 
> 2.39.2
> 

Re: [PATCH 1/2] Input: tps65219-pwrbutton - Convert to .remove_new()

[Dmitry Torokhov]

On Mon, Jun 05, 2023 at 06:14:57PM +0200, Uwe Kleine-König wrote:
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart from
> emitting a warning).
> 
> To improve here there is a quest to make the remove callback return void.
> In the first step of this quest all drivers are converted to .remove_new()
> which already returns void. Eventually after all drivers are converted,
> .remove_new() is renamed to .remove().
> 
> Before this driver might have returned an error. In this case emit a
> warning that tells more about the problem than the generic warning by
> the core, and instead of making the remove callback return zero
> unconditionally, convert to .remove_new() which is equivalent.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Applied, thank you.

-- 
Dmitry