[PATCH] Input: i8042 - add quirk for TUXEDO Gemini 17 Gen1/Clevo PD70PN

[Werner Sembach <wse@tuxedocomputers.com>]

The touchpad of this device is both connected via PS/2 and i2c. This causes
strange behavior when both driver fight for control. The easy fix is to
prevent the PS/2 driver from accessing the mouse port as the full feature
set of the touchpad is only supported in the i2c interface anyway.

The strange behavior in this case is, that when an external screen is
connected and the notebook is closed, the pointer on the external screen is
moving to the lower right corner. When the notebook is opened again, this
movement stops, but the touchpad clicks are unresponsive afterwards until
reboot.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
 drivers/input/serio/i8042-acpipnpio.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 028e45bd050bf..1724d6cb8649d 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1281,6 +1281,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	/* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PD5x_7xPNP_PNR_PNN_PNT"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
-- 
2.34.1