From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: Yangtao Li <frank.li@vivo.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] Input: qt2160 - convert to use devm_* api
Date: Sun, 23 Jul 2023 22:13:42 -0700 [thread overview]
Message-ID: <20230724051345.335219-4-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20230724051345.335219-1-dmitry.torokhov@gmail.com>
From: Yangtao Li <frank.li@vivo.com>
Use devm_* api to simplify code, this makes it unnecessary to explicitly
release resources.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230714080611.81302-7-frank.li@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/keyboard/qt2160.c | 77 +++++++++------------------------
1 file changed, 20 insertions(+), 57 deletions(-)
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 6cfaabd10482..7e3b09642ab7 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -239,7 +239,7 @@ static int qt2160_write(struct i2c_client *client, u8 reg, u8 data)
static int qt2160_register_leds(struct qt2160_data *qt2160)
{
struct i2c_client *client = qt2160->client;
- int ret;
+ int error;
int i;
for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
@@ -252,9 +252,9 @@ static int qt2160_register_leds(struct qt2160_data *qt2160)
led->id = i;
led->qt2160 = qt2160;
- ret = led_classdev_register(&client->dev, &led->cdev);
- if (ret < 0)
- return ret;
+ error = devm_led_classdev_register(&client->dev, &led->cdev);
+ if (error)
+ return error;
}
/* Tur off LEDs */
@@ -265,14 +265,6 @@ static int qt2160_register_leds(struct qt2160_data *qt2160)
return 0;
}
-static void qt2160_unregister_leds(struct qt2160_data *qt2160)
-{
- int i;
-
- for (i = 0; i < QT2160_NUM_LEDS_X; i++)
- led_classdev_unregister(&qt2160->leds[i].cdev);
-}
-
#else
static inline int qt2160_register_leds(struct qt2160_data *qt2160)
@@ -280,10 +272,6 @@ static inline int qt2160_register_leds(struct qt2160_data *qt2160)
return 0;
}
-static inline void qt2160_unregister_leds(struct qt2160_data *qt2160)
-{
-}
-
#endif
static bool qt2160_identify(struct i2c_client *client)
@@ -334,13 +322,13 @@ static int qt2160_probe(struct i2c_client *client)
return -ENODEV;
/* Chip is valid and active. Allocate structure */
- qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
- input = input_allocate_device();
- if (!qt2160 || !input) {
- dev_err(&client->dev, "insufficient memory\n");
- error = -ENOMEM;
- goto err_free_mem;
- }
+ qt2160 = devm_kzalloc(&client->dev, sizeof(*qt2160), GFP_KERNEL);
+ if (!qt2160)
+ return -ENOMEM;
+
+ input = devm_input_allocate_device(&client->dev);
+ if (!input)
+ return -ENOMEM;
qt2160->client = client;
qt2160->input = input;
@@ -366,22 +354,24 @@ static int qt2160_probe(struct i2c_client *client)
error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
if (error) {
dev_err(&client->dev, "failed to calibrate device\n");
- goto err_free_mem;
+ return error;
}
if (client->irq) {
- error = request_threaded_irq(client->irq, NULL, qt2160_irq,
- IRQF_ONESHOT, "qt2160", input);
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, qt2160_irq,
+ IRQF_ONESHOT,
+ "qt2160", input);
if (error) {
dev_err(&client->dev,
"failed to allocate irq %d\n", client->irq);
- goto err_free_mem;
+ return error;
}
} else {
error = input_setup_polling(input, qt2160_get_key_matrix);
if (error) {
dev_err(&client->dev, "Failed to setup polling\n");
- goto err_free_mem;
+ return error;
}
input_set_poll_interval(input, QT2160_CYCLE_INTERVAL);
}
@@ -389,43 +379,17 @@ static int qt2160_probe(struct i2c_client *client)
error = qt2160_register_leds(qt2160);
if (error) {
dev_err(&client->dev, "Failed to register leds\n");
- goto err_free_irq;
+ return error;
}
error = input_register_device(qt2160->input);
if (error) {
dev_err(&client->dev,
"Failed to register input device\n");
- goto err_unregister_leds;
+ return error;
}
- i2c_set_clientdata(client, qt2160);
-
return 0;
-
-err_unregister_leds:
- qt2160_unregister_leds(qt2160);
-err_free_irq:
- if (client->irq)
- free_irq(client->irq, qt2160);
-err_free_mem:
- input_free_device(input);
- kfree(qt2160);
- return error;
-}
-
-static void qt2160_remove(struct i2c_client *client)
-{
- struct qt2160_data *qt2160 = i2c_get_clientdata(client);
-
- qt2160_unregister_leds(qt2160);
-
- /* Release IRQ so no queue will be scheduled */
- if (client->irq)
- free_irq(client->irq, qt2160);
-
- input_unregister_device(qt2160->input);
- kfree(qt2160);
}
static const struct i2c_device_id qt2160_idtable[] = {
@@ -442,7 +406,6 @@ static struct i2c_driver qt2160_driver = {
.id_table = qt2160_idtable,
.probe = qt2160_probe,
- .remove = qt2160_remove,
};
module_i2c_driver(qt2160_driver);
--
2.41.0.487.g6d72f3e995-goog
prev parent reply other threads:[~2023-07-24 5:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-24 5:13 [PATCH 1/4] Input: qt2160 - tweak check for i2c adapter functionality Dmitry Torokhov
2023-07-24 5:13 ` [PATCH 2/4] Input: qt2160 - switch to using threaded interrupt handler Dmitry Torokhov
2023-07-24 5:13 ` [PATCH 3/4] Input: qt2160 - do not hard code interrupt trigger Dmitry Torokhov
2023-07-24 5:13 ` Dmitry Torokhov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230724051345.335219-4-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=frank.li@vivo.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).