* [PATCH v3 01/32] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 6:29 ` Krzysztof Kozlowski
2023-08-22 0:13 ` [PATCH v3 02/32] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes Dmitry Baryshkov
` (30 subsequent siblings)
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input, Dmitry Torokhov
Convert the bindings for the keypad subdevices of Qualcomm PM8921 and
PM8058 PMICs from text to YAML format.
While doing the conversion also drop the linux,keypad-no-autorepeat
The property was never used by DT files. Both input and DT binding
maintainers consider that bindings should switch to assertive
(linux,autorepeat) instead of negating (no-autorepeat) property.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/input/qcom,pm8921-keypad.yaml | 89 ++++++++++++++++++
.../bindings/input/qcom,pm8xxx-keypad.txt | 90 -------------------
2 files changed, 89 insertions(+), 90 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
delete mode 100644 Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
new file mode 100644
index 000000000000..88764adcd696
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC KeyPad
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+allOf:
+ - $ref: input.yaml#
+ - $ref: matrix-keymap.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8058-keypad
+ - qcom,pm8921-keypad
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: key sense
+ - description: key stuck
+
+ wakeup-source:
+ type: boolean
+ description: use any event on keypad as wakeup event
+
+ linux,keypad-wakeup:
+ type: boolean
+ deprecated: true
+ description: legacy version of the wakeup-source property
+
+ debounce:
+ description:
+ Time in microseconds that key must be pressed or
+ released for state change interrupt to trigger.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ scan-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: time in microseconds to pause between successive scans of the
+ matrix array
+
+ row-hold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: time in nanoseconds to pause between scans of each row in the
+ matrix array.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(0, 3, KEY_CAMERA)
+ >;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <5>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
deleted file mode 100644
index 4a9dc6ba96b1..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Qualcomm PM8xxx PMIC Keypad
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8058-keypad"
- "qcom,pm8921-keypad"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: address of keypad control register
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the first interrupt specifies the key sense interrupt
- and the second interrupt specifies the key stuck interrupt.
- The format of the specifier is defined by the binding
- document describing the node's interrupt parent.
-
-- linux,keymap:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the linux keymap. More information can be found in
- input/matrix-keymap.txt.
-
-- linux,keypad-no-autorepeat:
- Usage: optional
- Value type: <bool>
- Definition: don't enable autorepeat feature.
-
-- wakeup-source:
- Usage: optional
- Value type: <bool>
- Definition: use any event on keypad as wakeup event.
- (Legacy property supported: "linux,keypad-wakeup")
-
-- keypad,num-rows:
- Usage: required
- Value type: <u32>
- Definition: number of rows in the keymap. More information can be found
- in input/matrix-keymap.txt.
-
-- keypad,num-columns:
- Usage: required
- Value type: <u32>
- Definition: number of columns in the keymap. More information can be
- found in input/matrix-keymap.txt.
-
-- debounce:
- Usage: optional
- Value type: <u32>
- Definition: time in microseconds that key must be pressed or release
- for key sense interrupt to trigger.
-
-- scan-delay:
- Usage: optional
- Value type: <u32>
- Definition: time in microseconds to pause between successive scans
- of the matrix array.
-
-- row-hold:
- Usage: optional
- Value type: <u32>
- Definition: time in nanoseconds to pause between scans of each row in
- the matrix array.
-
-EXAMPLE
-
- keypad@148 {
- compatible = "qcom,pm8921-keypad";
- reg = <0x148>;
- interrupt-parent = <&pmicintc>;
- interrupts = <74 1>, <75 1>;
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_VOLUMEUP)
- MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
- MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
- MATRIX_KEY(0, 3, KEY_CAMERA)
- >;
- keypad,num-rows = <1>;
- keypad,num-columns = <5>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v3 01/32] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
2023-08-22 0:13 ` [PATCH v3 01/32] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format Dmitry Baryshkov
@ 2023-08-22 6:29 ` Krzysztof Kozlowski
0 siblings, 0 replies; 47+ messages in thread
From: Krzysztof Kozlowski @ 2023-08-22 6:29 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input, Dmitry Torokhov
On 22/08/2023 02:13, Dmitry Baryshkov wrote:
> Convert the bindings for the keypad subdevices of Qualcomm PM8921 and
> PM8058 PMICs from text to YAML format.
>
> While doing the conversion also drop the linux,keypad-no-autorepeat
> The property was never used by DT files. Both input and DT binding
> maintainers consider that bindings should switch to assertive
> (linux,autorepeat) instead of negating (no-autorepeat) property.
>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 02/32] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 01/32] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 6:29 ` Krzysztof Kozlowski
2023-08-22 0:13 ` [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format Dmitry Baryshkov
` (29 subsequent siblings)
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input, Lee Jones, Satya Priya
Add gpio, keypad, led, mpps, pwrkey, vibrator and xoadc as possible
child nodes of qcom,pm8xxx, referencing existint schema files.
Cc: Lee Jones <lee@kernel.org>
Cc: Satya Priya <quic_c_skakit@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 26 ++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 9c51c1b19067..7fe3875a5996 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -43,13 +43,37 @@ properties:
interrupt-controller: true
patternProperties:
+ "gpio@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
+
+ "keypad@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/input/qcom,pm8921-keypad.yaml#
+
"led@[0-9a-f]+$":
type: object
$ref: /schemas/leds/qcom,pm8058-led.yaml#
+ "mpps@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
+
+ "pwrkey@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/input/qcom,pm8921-pwrkey.yaml#
+
"rtc@[0-9a-f]+$":
type: object
- $ref: ../rtc/qcom-pm8xxx-rtc.yaml
+ $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
+
+ "vibrator@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/input/qcom,pm8xxx-vib.yaml#
+
+ "xoadc@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/iio/adc/qcom,pm8018-adc.yaml#
required:
- compatible
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v3 02/32] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
2023-08-22 0:13 ` [PATCH v3 02/32] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes Dmitry Baryshkov
@ 2023-08-22 6:29 ` Krzysztof Kozlowski
0 siblings, 0 replies; 47+ messages in thread
From: Krzysztof Kozlowski @ 2023-08-22 6:29 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input, Lee Jones, Satya Priya
On 22/08/2023 02:13, Dmitry Baryshkov wrote:
> Add gpio, keypad, led, mpps, pwrkey, vibrator and xoadc as possible
> child nodes of qcom,pm8xxx, referencing existint schema files.
>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Satya Priya <quic_c_skakit@quicinc.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 01/32] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 02/32] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 6:30 ` Krzysztof Kozlowski
2023-08-22 20:24 ` Rob Herring
2023-08-22 0:13 ` [PATCH v3 04/32] ARM: dts: qcom: apq8064: correct XOADC register address Dmitry Baryshkov
` (28 subsequent siblings)
31 siblings, 2 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Convert arm/msm/ssbi.txt yo YAML, moving it to the directory with bus
bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../devicetree/bindings/arm/msm/ssbi.txt | 18 ------
.../devicetree/bindings/bus/qcom,ssbi.yaml | 63 +++++++++++++++++++
2 files changed, 63 insertions(+), 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/msm/ssbi.txt
create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
diff --git a/Documentation/devicetree/bindings/arm/msm/ssbi.txt b/Documentation/devicetree/bindings/arm/msm/ssbi.txt
deleted file mode 100644
index 54fd5ced3401..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/ssbi.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Qualcomm SSBI
-
-Some Qualcomm MSM devices contain a point-to-point serial bus used to
-communicate with a limited range of devices (mostly power management
-chips).
-
-These require the following properties:
-
-- compatible: "qcom,ssbi"
-
-- qcom,controller-type
- indicates the SSBI bus variant the controller should use to talk
- with the slave device. This should be one of "ssbi", "ssbi2", or
- "pmic-arbiter". The type chosen is determined by the attached
- slave.
-
-The slave device should be the single child node of the ssbi device
-with a compatible field.
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
new file mode 100644
index 000000000000..693cfa9696b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Single-wire Serial Bus Interface (SSBI)
+
+description:
+ Some Qualcomm MSM devices contain a point-to-point serial bus used to
+ communicate with a limited range of devices (mostly power management
+ chips).
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+ compatible:
+ const: qcom,ssbi
+
+ reg:
+ maxItems: 1
+
+ qcom,controller-type:
+ description:
+ Indicates the SSBI bus variant the controller should use to talk
+ with the slave device. The type chosen is determined by the attached
+ slave.
+ enum:
+ - ssbi
+ - ssbi2
+ - pmic-arbiter
+
+ pmic:
+ $ref: /schemas/mfd/qcom-pm8xxx.yaml#
+
+required:
+ - compatible
+ - reg
+ - qcom,controller-type
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ ssbi@c00000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00c00000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+
+ pmic {
+ compatible = "qcom,pm8821";
+ interrupt-parent = <&msmgpio>;
+ interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+...
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format
2023-08-22 0:13 ` [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format Dmitry Baryshkov
@ 2023-08-22 6:30 ` Krzysztof Kozlowski
2023-08-22 20:24 ` Rob Herring
1 sibling, 0 replies; 47+ messages in thread
From: Krzysztof Kozlowski @ 2023-08-22 6:30 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
On 22/08/2023 02:13, Dmitry Baryshkov wrote:
> Convert arm/msm/ssbi.txt yo YAML, moving it to the directory with bus
> bindings.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format
2023-08-22 0:13 ` [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format Dmitry Baryshkov
2023-08-22 6:30 ` Krzysztof Kozlowski
@ 2023-08-22 20:24 ` Rob Herring
1 sibling, 0 replies; 47+ messages in thread
From: Rob Herring @ 2023-08-22 20:24 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: linux-input, devicetree, Krzysztof Kozlowski, linux-arm-msm,
Rob Herring, Bjorn Andersson, Andy Gross, Konrad Dybcio
On Tue, 22 Aug 2023 03:13:20 +0300, Dmitry Baryshkov wrote:
> Convert arm/msm/ssbi.txt yo YAML, moving it to the directory with bus
> bindings.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../devicetree/bindings/arm/msm/ssbi.txt | 18 ------
> .../devicetree/bindings/bus/qcom,ssbi.yaml | 63 +++++++++++++++++++
> 2 files changed, 63 insertions(+), 18 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/arm/msm/ssbi.txt
> create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 04/32] ARM: dts: qcom: apq8064: correct XOADC register address
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (2 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 03/32] dt-bindings: bus: convert qcom,ssbi schema to YAML format Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 6:31 ` Krzysztof Kozlowski
2023-08-22 0:13 ` [PATCH v3 05/32] ARM: dts: qcom: msm8960: introduce label for PMIC keypad Dmitry Baryshkov
` (27 subsequent siblings)
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The XOADC is present at the address 0x197 rather than just 197. It
doesn't change a lot (since the driver hardcodes all register
addresses), but the DT should present correct address anyway.
Fixes: c4b70883ee33 ("ARM: dts: add XOADC and IIO HWMON to APQ8064")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 516f0d2495e2..950adb63af70 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -738,7 +738,7 @@ pwrkey@1c {
xoadc: xoadc@197 {
compatible = "qcom,pm8921-adc";
- reg = <197>;
+ reg = <0x197>;
interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
#address-cells = <2>;
#size-cells = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v3 04/32] ARM: dts: qcom: apq8064: correct XOADC register address
2023-08-22 0:13 ` [PATCH v3 04/32] ARM: dts: qcom: apq8064: correct XOADC register address Dmitry Baryshkov
@ 2023-08-22 6:31 ` Krzysztof Kozlowski
0 siblings, 0 replies; 47+ messages in thread
From: Krzysztof Kozlowski @ 2023-08-22 6:31 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
On 22/08/2023 02:13, Dmitry Baryshkov wrote:
> The XOADC is present at the address 0x197 rather than just 197. It
> doesn't change a lot (since the driver hardcodes all register
> addresses), but the DT should present correct address anyway.
>
> Fixes: c4b70883ee33 ("ARM: dts: add XOADC and IIO HWMON to APQ8064")
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 2 +-
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 05/32] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (3 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 04/32] ARM: dts: qcom: apq8064: correct XOADC register address Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 06/32] ARM: dts: qcom: msm8660-surf: use keypad label directly Dmitry Baryshkov
` (26 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
To simplify MSM8960 CDP board file, add label to PMIC keypad node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 20 +++++++++-----------
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 2 +-
2 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 6c1bc3818883..4641b4f2195d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -88,17 +88,15 @@ clk-pins {
};
};
-&pmicintc {
- keypad@148 {
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_VOLUMEUP)
- MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
- MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
- MATRIX_KEY(0, 3, KEY_CAMERA)
- >;
- keypad,num-rows = <1>;
- keypad,num-columns = <5>;
- };
+&pm8921_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(0, 3, KEY_CAMERA)
+ >;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <5>;
};
&rpm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index d13080fcbeea..a34fda93d6a4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -283,7 +283,7 @@ pwrkey@1c {
pull-up;
};
- keypad@148 {
+ pm8921_keypad: keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
interrupt-parent = <&pmicintc>;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 06/32] ARM: dts: qcom: msm8660-surf: use keypad label directly
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (4 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 05/32] ARM: dts: qcom: msm8960: introduce label for PMIC keypad Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 07/32] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place Dmitry Baryshkov
` (25 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Directly use pm8058_keypad to declare keypad properties instead of
referencing pm8058 top-level node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 50 ++++++++++----------
1 file changed, 24 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index be18f1be29a1..86fbb6dfdc2a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -34,32 +34,30 @@ &gsbi12_serial {
status = "okay";
};
-&pm8058 {
- keypad@148 {
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_FN_F1)
- MATRIX_KEY(0, 1, KEY_UP)
- MATRIX_KEY(0, 2, KEY_LEFT)
- MATRIX_KEY(0, 3, KEY_VOLUMEUP)
- MATRIX_KEY(1, 0, KEY_FN_F2)
- MATRIX_KEY(1, 1, KEY_RIGHT)
- MATRIX_KEY(1, 2, KEY_DOWN)
- MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
- MATRIX_KEY(2, 3, KEY_ENTER)
- MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
- MATRIX_KEY(4, 1, KEY_UP)
- MATRIX_KEY(4, 2, KEY_LEFT)
- MATRIX_KEY(4, 3, KEY_HOME)
- MATRIX_KEY(4, 4, KEY_FN_F3)
- MATRIX_KEY(5, 0, KEY_CAMERA)
- MATRIX_KEY(5, 1, KEY_RIGHT)
- MATRIX_KEY(5, 2, KEY_DOWN)
- MATRIX_KEY(5, 3, KEY_BACK)
- MATRIX_KEY(5, 4, KEY_MENU)
- >;
- keypad,num-rows = <6>;
- keypad,num-columns = <5>;
- };
+&pm8058_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_FN_F1)
+ MATRIX_KEY(0, 1, KEY_UP)
+ MATRIX_KEY(0, 2, KEY_LEFT)
+ MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(1, 0, KEY_FN_F2)
+ MATRIX_KEY(1, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 2, KEY_DOWN)
+ MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+ MATRIX_KEY(2, 3, KEY_ENTER)
+ MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(4, 1, KEY_UP)
+ MATRIX_KEY(4, 2, KEY_LEFT)
+ MATRIX_KEY(4, 3, KEY_HOME)
+ MATRIX_KEY(4, 4, KEY_FN_F3)
+ MATRIX_KEY(5, 0, KEY_CAMERA)
+ MATRIX_KEY(5, 1, KEY_RIGHT)
+ MATRIX_KEY(5, 2, KEY_DOWN)
+ MATRIX_KEY(5, 3, KEY_BACK)
+ MATRIX_KEY(5, 4, KEY_MENU)
+ >;
+ keypad,num-rows = <6>;
+ keypad,num-columns = <5>;
};
/* eMMC */
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 07/32] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (5 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 06/32] ARM: dts: qcom: msm8660-surf: use keypad label directly Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 08/32] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses Dmitry Baryshkov
` (24 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Move sdcc1 device node to follow the alphanumberic sorting order.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c57c27cd8a20..0e80a5a8e3c6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -181,13 +181,6 @@ &mdp {
status = "okay";
};
-/* eMMC */
-&sdcc1 {
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- status = "okay";
-};
-
&mdp_dsi1_out {
remote-endpoint = <&dsi0_in>;
};
@@ -336,6 +329,13 @@ lvs7 {
};
};
+/* eMMC */
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+ status = "okay";
+};
+
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 08/32] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (6 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 07/32] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 09/32] ARM: dts: qcom: strip prefix from PMIC files Dmitry Baryshkov
` (23 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Group file inclusion to follow contemporary practice.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdca1460..e3b4b93c3d38 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
* Author : Neil Armstrong <narmstrong@baylibre.com>
*/
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "MangOH Green with WP8548 Module";
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 09/32] ARM: dts: qcom: strip prefix from PMIC files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (7 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 08/32] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 10/32] ARM: dts: qcom: apq8064: fix PMIC node labels Dmitry Baryshkov
` (22 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
As the vendor DTS files were moved to per-vendor subdirs, there no need
to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file.
This makes 32-bit qcom/ dts files closer to arm64 ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/{qcom-pm8226.dtsi => pm8226.dtsi} | 0
arch/arm/boot/dts/qcom/{qcom-pm8841.dtsi => pm8841.dtsi} | 0
arch/arm/boot/dts/qcom/{qcom-pm8941.dtsi => pm8941.dtsi} | 0
arch/arm/boot/dts/qcom/{qcom-pma8084.dtsi => pma8084.dtsi} | 0
arch/arm/boot/dts/qcom/{qcom-pmx55.dtsi => pmx55.dtsi} | 0
arch/arm/boot/dts/qcom/{qcom-pmx65.dtsi => pmx65.dtsi} | 0
arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi | 4 ++--
arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts | 2 +-
.../dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts | 2 +-
23 files changed, 23 insertions(+), 23 deletions(-)
rename arch/arm/boot/dts/qcom/{qcom-pm8226.dtsi => pm8226.dtsi} (100%)
rename arch/arm/boot/dts/qcom/{qcom-pm8841.dtsi => pm8841.dtsi} (100%)
rename arch/arm/boot/dts/qcom/{qcom-pm8941.dtsi => pm8941.dtsi} (100%)
rename arch/arm/boot/dts/qcom/{qcom-pma8084.dtsi => pma8084.dtsi} (100%)
rename arch/arm/boot/dts/qcom/{qcom-pmx55.dtsi => pmx55.dtsi} (100%)
rename arch/arm/boot/dts/qcom/{qcom-pmx65.dtsi => pmx65.dtsi} (100%)
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
rename to arch/arm/boot/dts/qcom/pm8226.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom/pm8841.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
rename to arch/arm/boot/dts/qcom/pm8841.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
rename to arch/arm/boot/dts/qcom/pm8941.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
rename to arch/arm/boot/dts/qcom/pma8084.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom/pmx55.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
rename to arch/arm/boot/dts/qcom/pmx55.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom/pmx65.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
rename to arch/arm/boot/dts/qcom/pmx65.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8d2a97..a39f5a161b03 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
/delete-node/ &adsp_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640efe55..59b218042d32 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
#include <dt-bindings/input/ti-drv260x.h>
/delete-node/ &adsp_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index b887e5361ec3..feb78afef3a6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
/delete-node/ &adsp_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index 884d99297d4c..42d3867dca42 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
/delete-node/ &adsp_region;
/delete-node/ &smem_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6d1b2439ae3a..950fa652f985 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
/delete-node/ &mpss_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
index 116e59a3b76d..1df24c922be9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
/ {
model = "Qualcomm APQ8084/IFC6540";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
/ {
model = "Qualcomm APQ 8084-MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..da99f770d4f5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f9094e53..23ae474698aa 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b75dad..6c4153689b39 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e1d95d..c0ca264d8140 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c86591ee2..325feb89b343 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/leds/common.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1409f7..0798cce3dbea 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 7e97ad5803d8..247069361909 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
#include "qcom-sdx55.dtsi"
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 51058b065279..082f7ed1a01f 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
/ {
model = "Thundercomm T55 Development Kit";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e70692..e336a15b45c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
/ {
model = "Telit FN980 TLB";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index fcf1c51c5e7a..b87c5434cc29 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -8,7 +8,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <arm64/qcom/pmk8350.dtsi>
#include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SDX65 MTP";
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 10/32] ARM: dts: qcom: apq8064: fix PMIC node labels
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (8 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 09/32] ARM: dts: qcom: strip prefix from PMIC files Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 11/32] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
` (21 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Change PM8921 node labels to start with pm8921_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 950adb63af70..6514d728b1ec 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -292,13 +292,13 @@ scm {
*/
iio-hwmon {
compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Charger temperature */
+ io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+ <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
};
soc: soc {
@@ -686,7 +686,7 @@ ssbi@500000 {
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic {
+ pm8921: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&tlmm_pinmux>;
interrupts = <74 8>;
@@ -721,7 +721,7 @@ pm8921_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <39 1>;
reg = <0x11d>;
allow-set-time;
@@ -730,16 +730,16 @@ rtc@11d {
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <50 1>, <51 1>;
debounce = <15625>;
pull-up;
};
- xoadc: xoadc@197 {
+ pm8921_xoadc: xoadc@197 {
compatible = "qcom,pm8921-adc";
reg = <0x197>;
- interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
#address-cells = <2>;
#size-cells = <0>;
#io-channel-cells = <2>;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 11/32] ARM: dts: qcom: mdm9615: fix PMIC node labels
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (9 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 10/32] ARM: dts: qcom: apq8064: fix PMIC node labels Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 12/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
` (20 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Change PM8018 node labels to start with pm8018_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 2 +-
arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 14 +++++++-------
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..dac3aa793f71 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,7 +76,7 @@ reset-out-pins {
};
};
-&pmicgpio {
+&pm8018_gpio {
usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index fc4f52f9e9f7..c4cfbdbcdf14 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -263,7 +263,7 @@ qcom,ssbi@500000 {
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic {
+ pm8018: pmic {
compatible = "qcom,pm8018", "qcom,pm8921";
interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
@@ -274,38 +274,38 @@ pmicintc: pmic {
pwrkey@1c {
compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8018>;
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
<51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
- pmicmpp: mpps@50 {
+ pm8018_mpps: mpps@50 {
compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pmicmpp 0 0 6>;
+ gpio-ranges = <&pm8018_mpps 0 0 6>;
};
rtc@11d {
compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8018>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
};
- pmicgpio: gpio@150 {
+ pm8018_gpio: gpio@150 {
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
reg = <0x150>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
- gpio-ranges = <&pmicgpio 0 0 6>;
+ gpio-ranges = <&pm8018_gpio 0 0 6>;
#gpio-cells = <2>;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 12/32] ARM: dts: qcom: msm8660: fix PMIC node labels
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (10 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 11/32] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 13/32] ARM: dts: qcom: msm8960: " Dmitry Baryshkov
` (19 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++--
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 16 ++++++++--------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index db4c791b2e2f..48fd1a1feea3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -72,7 +72,7 @@ cm3605 {
/* Trig on both edges - getting close or far away */
interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
/* MPP05 analog input to the XOADC */
- io-channels = <&xoadc 0x00 0x05>;
+ io-channels = <&pm8058_xoadc 0x00 0x05>;
io-channel-names = "aout";
pinctrl-names = "default";
pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -945,7 +945,7 @@ irq-pins {
};
};
-&xoadc {
+&pm8058_xoadc {
/* Reference voltage 2.2 V */
xoadc-ref-supply = <&pm8058_l18>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..9217ced108c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -80,13 +80,13 @@ sleep-clk {
*/
iio-hwmon {
compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+ io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+ <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
};
soc: soc {
@@ -390,7 +390,7 @@ pm8058_keypad: keypad@148 {
row-hold = <91500>;
};
- xoadc: xoadc@197 {
+ pm8058_xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 13/32] ARM: dts: qcom: msm8960: fix PMIC node labels
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (11 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 12/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 14/32] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files Dmitry Baryshkov
` (18 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Change PM8921 node labels to start with pm8921_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index a34fda93d6a4..ea2d961b266b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -264,7 +264,7 @@ ssbi@500000 {
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic {
+ pm8921: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&msmgpio>;
interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
@@ -276,7 +276,7 @@ pmicintc: pmic {
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
<51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
@@ -286,7 +286,7 @@ pwrkey@1c {
pm8921_keypad: keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <74 IRQ_TYPE_EDGE_RISING>,
<75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
@@ -296,7 +296,7 @@ pm8921_keypad: keypad@148 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 14/32] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (12 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 13/32] ARM: dts: qcom: msm8960: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 15/32] ARM: dts: qcom: apq8064: split PMICs " Dmitry Baryshkov
` (17 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 40 +++++++++++++++++++
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 1 +
.../qcom/qcom-msm8960-samsung-expressatt.dts | 3 +-
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 38 +-----------------
4 files changed, 45 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/pm8921.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 000000000000..414941f7a42f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8921: pmic {
+ compatible = "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8921>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8921_keypad: keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pm8921>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+ <75 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ interrupt-parent = <&pm8921>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 4641b4f2195d..414881d34c60 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c287498..2e7d98e132be 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
/ {
model = "Samsung Galaxy Express SGH-I437";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index ea2d961b266b..4a6b22bed1e4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -259,48 +259,14 @@ gsbi5_serial: serial@16440000 {
};
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8921: pmic {
- compatible = "qcom,pm8921";
+ pmic {
interrupt-parent = <&msmgpio>;
interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8921>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8921_keypad: keypad@148 {
- compatible = "qcom,pm8921-keypad";
- reg = <0x148>;
- interrupt-parent = <&pm8921>;
- interrupts = <74 IRQ_TYPE_EDGE_RISING>,
- <75 IRQ_TYPE_EDGE_RISING>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pm8921>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 15/32] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (13 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 14/32] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC " Dmitry Baryshkov
` (16 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The PMICs are not a part of the SoC, so move PMICs to separate files and
include them from the board files.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8821.dtsi | 22 +++
arch/arm/boot/dts/qcom/pm8921.dtsi | 99 +++++++++++++
.../dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 6 +-
.../boot/dts/qcom/qcom-apq8064-cm-qs600.dts | 5 +-
.../boot/dts/qcom/qcom-apq8064-ifc6410.dts | 5 +-
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 5 +-
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 132 +-----------------
7 files changed, 142 insertions(+), 132 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/pm8821.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi
new file mode 100644
index 000000000000..064e3ba54e18
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+ pm8821: pmic {
+ compatible = "qcom,pm8821";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8821_mpps 0 0 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 414941f7a42f..ad41d99ab265 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -8,6 +8,30 @@ pm8921: pmic {
#address-cells = <1>;
#size-cells = <0>;
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
+ };
+
+ pm8921_mpps: mpps@50 {
+ compatible = "qcom,pm8921-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8921_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
@@ -36,5 +60,80 @@ rtc@11d {
reg = <0x11d>;
allow-set-time;
};
+
+ pm8921_xoadc: xoadc@197 {
+ compatible = "qcom,pm8921-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ batt_therm: adc-channel@8 {
+ reg = <0x00 0x08>;
+ };
+
+ batt_id: adc-channel@9 {
+ reg = <0x00 0x09>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ chg_temp: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+ <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 0e80a5a8e3c6..d5dee70620c2 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Asus Nexus7(flo)";
compatible = "asus,nexus7-flo", "qcom,apq8064";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8addb7..ffd654ab0b57 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index 96307550523a..12bf8ea3fb93 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74d1..53dd9d79556f 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Sony Xperia Z";
compatible = "sony,xperia-yuga", "qcom,apq8064";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 6514d728b1ec..88e722c023b3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@ scm {
};
};
-
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
- <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
- <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
- <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -655,132 +638,25 @@ rng@1a500000 {
clock-names = "core";
};
- ssbi@c00000 {
+ ssbi2: ssbi@c00000 {
compatible = "qcom,ssbi";
reg = <0x00c00000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8821: pmic {
- compatible = "qcom,pm8821";
+ pmic {
interrupt-parent = <&tlmm_pinmux>;
interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8821_mpps: mpps@50 {
- compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
- reg = <0x50>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8821_mpps 0 0 4>;
- };
};
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8921: pmic {
- compatible = "qcom,pm8921";
+ pmic {
interrupt-parent = <&tlmm_pinmux>;
interrupts = <74 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8921_gpio: gpio@150 {
-
- compatible = "qcom,pm8921-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8921_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8921_mpps: mpps@50 {
- compatible = "qcom,pm8921-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8921_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pm8921>;
- interrupts = <39 1>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8921>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8921_xoadc: xoadc@197 {
- compatible = "qcom,pm8921-adc";
- reg = <0x197>;
- interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- batt_therm: adc-channel@8 {
- reg = <0x00 0x08>;
- };
- batt_id: adc-channel@9 {
- reg = <0x00 0x09>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- chg_temp: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (14 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 15/32] ARM: dts: qcom: apq8064: split PMICs " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-26 12:08 ` Konrad Dybcio
2023-08-22 0:13 ` [PATCH v3 17/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
` (15 subsequent siblings)
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input, Neil Armstrong
The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8018.dtsi | 57 +++++++++++++++++++
.../boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 1 +
arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 47 +--------------
3 files changed, 60 insertions(+), 45 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/pm8018.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 000000000000..c602544900b2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+ pm8018: pmic {
+ compatible = "qcom,pm8018", "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8018-pwrkey",
+ "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8018>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8018_mpps: mpps@50 {
+ compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8018_mpps 0 0 6>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+ interrupt-parent = <&pm8018>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+
+ pm8018_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8018_gpio 0 0 6>;
+ #gpio-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f71..cc264861afe5 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
*/
#include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
/ {
model = "Sierra Wireless WP8548 Module";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c4cfbdbcdf14..11e5ab2708d7 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -258,56 +258,13 @@ gsbi5_serial: serial@16440000 {
};
};
- qcom,ssbi@500000 {
+ ssbi: qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8018: pmic {
- compatible = "qcom,pm8018", "qcom,pm8921";
+ pmic {
interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8018>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8018_mpps: mpps@50 {
- compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8018_mpps 0 0 6>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
- interrupt-parent = <&pm8018>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pm8018_gpio: gpio@150 {
- compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8018_gpio 0 0 6>;
- #gpio-cells = <2>;
- };
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
2023-08-22 0:13 ` [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC " Dmitry Baryshkov
@ 2023-08-26 12:08 ` Konrad Dybcio
2023-08-26 13:43 ` Dmitry Baryshkov
0 siblings, 1 reply; 47+ messages in thread
From: Konrad Dybcio @ 2023-08-26 12:08 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input, Neil Armstrong
On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> The PMIC is not a part of the SoC, so move PMIC to a separate file and
> include it from the board files.
>
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
[...]
> + pmic {
Are you leaving an empty subnode here?
Konrad
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
2023-08-26 12:08 ` Konrad Dybcio
@ 2023-08-26 13:43 ` Dmitry Baryshkov
2023-08-26 13:48 ` Konrad Dybcio
0 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-26 13:43 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
linux-arm-msm, devicetree, linux-input, Neil Armstrong
On Sat, 26 Aug 2023 at 15:08, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> > The PMIC is not a part of the SoC, so move PMIC to a separate file and
> > include it from the board files.
> >
> > Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> [...]
>
> > + pmic {
> Are you leaving an empty subnode here?
No. It contains 'interrupts' property (which is specific to the SoC).
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
2023-08-26 13:43 ` Dmitry Baryshkov
@ 2023-08-26 13:48 ` Konrad Dybcio
2023-08-26 14:03 ` Dmitry Baryshkov
0 siblings, 1 reply; 47+ messages in thread
From: Konrad Dybcio @ 2023-08-26 13:48 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
linux-arm-msm, devicetree, linux-input, Neil Armstrong
On 26.08.2023 15:43, Dmitry Baryshkov wrote:
> On Sat, 26 Aug 2023 at 15:08, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>>
>> On 22.08.2023 02:13, Dmitry Baryshkov wrote:
>>> The PMIC is not a part of the SoC, so move PMIC to a separate file and
>>> include it from the board files.
>>>
>>> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>> [...]
>>
>>> + pmic {
>> Are you leaving an empty subnode here?
>
> No. It contains 'interrupts' property (which is specific to the SoC).
Meh, that's bad design.. should have been in the controller node!
But noboyd thought about this 10y+ ago so here we are
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
2023-08-26 13:48 ` Konrad Dybcio
@ 2023-08-26 14:03 ` Dmitry Baryshkov
0 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-26 14:03 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
linux-arm-msm, devicetree, linux-input, Neil Armstrong
On Sat, 26 Aug 2023 at 16:48, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 26.08.2023 15:43, Dmitry Baryshkov wrote:
> > On Sat, 26 Aug 2023 at 15:08, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> >>
> >> On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> >>> The PMIC is not a part of the SoC, so move PMIC to a separate file and
> >>> include it from the board files.
> >>>
> >>> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> >>> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> >>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >>> ---
> >> [...]
> >>
> >>> + pmic {
> >> Are you leaving an empty subnode here?
> >
> > No. It contains 'interrupts' property (which is specific to the SoC).
> Meh, that's bad design.. should have been in the controller node!
It will not be logical either. The interrupt line comes from the PMIC.
Wait. Maybe we should do it other way around: move IRQ to the _board_
file, since it is just a GPIO line. Then we don't have to leave this
band-aid in place.
> But noboyd thought about this 10y+ ago so here we are
>
> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
> Konrad
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 17/32] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (15 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 16/32] ARM: dts: qcom: mdm9615: split PMIC " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-26 12:08 ` Konrad Dybcio
2023-08-26 13:49 ` Konrad Dybcio
2023-08-22 0:13 ` [PATCH v3 18/32] ARM: dts: qcom: pm8058: reorder nodes Dmitry Baryshkov
` (14 subsequent siblings)
31 siblings, 2 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8058.dtsi | 160 ++++++++++++++++++
.../dts/qcom/qcom-apq8060-dragonboard.dts | 1 +
arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 1 +
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 148 +---------------
4 files changed, 164 insertions(+), 146 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/pm8058.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 000000000000..ad581c3bcbd2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8058: pmic {
+ compatible = "qcom,pm8058";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
+ #gpio-cells = <2>;
+ };
+
+ pm8058_mpps: mpps@50 {
+ compatible = "qcom,pm8058-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8058_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8058_keypad: keypad@148 {
+ compatible = "qcom,pm8058-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <74 1>, <75 1>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ pm8058_xoadc: xoadc@197 {
+ compatible = "qcom,pm8058-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ ichg: adc-channel@3 {
+ reg = <0x00 0x03>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ ref_325mv: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+
+ rtc@1e8 {
+ compatible = "qcom,pm8058-rtc";
+ reg = <0x1e8>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <39 1>;
+ allow-set-time;
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+
+ pm8058_led48: led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ status = "disabled";
+ };
+
+ pm8058_led131: led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ status = "disabled";
+ };
+
+ pm8058_led132: led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ status = "disabled";
+ };
+
+ pm8058_led133: led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ status = "disabled";
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+ <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 48fd1a1feea3..20de516a8deb 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm APQ8060 Dragonboard";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index 86fbb6dfdc2a..04dca0c93971 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 9217ced108c4..b8094b7c09fc 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@ sleep-clk {
};
};
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
- <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
- <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
- <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -334,142 +318,14 @@ ebi2: external-bus@1a100000 {
status = "disabled";
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pm8058: pmic {
- compatible = "qcom,pm8058";
+ pmic {
interrupt-parent = <&tlmm>;
interrupts = <88 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8058_gpio: gpio@150 {
- compatible = "qcom,pm8058-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8058_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8058_mpps: mpps@50 {
- compatible = "qcom,pm8058-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8058_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8058-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8058_keypad: keypad@148 {
- compatible = "qcom,pm8058-keypad";
- reg = <0x148>;
- interrupt-parent = <&pm8058>;
- interrupts = <74 1>, <75 1>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- pm8058_xoadc: xoadc@197 {
- compatible = "qcom,pm8058-adc";
- reg = <0x197>;
- interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- ichg: adc-channel@3 {
- reg = <0x00 0x03>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- ref_325mv: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
-
- rtc@1e8 {
- compatible = "qcom,pm8058-rtc";
- reg = <0x1e8>;
- interrupt-parent = <&pm8058>;
- interrupts = <39 1>;
- allow-set-time;
- };
-
- vibrator@4a {
- compatible = "qcom,pm8058-vib";
- reg = <0x4a>;
- };
-
- pm8058_led48: led@48 {
- compatible = "qcom,pm8058-keypad-led";
- reg = <0x48>;
- status = "disabled";
- };
-
- pm8058_led131: led@131 {
- compatible = "qcom,pm8058-led";
- reg = <0x131>;
- status = "disabled";
- };
-
- pm8058_led132: led@132 {
- compatible = "qcom,pm8058-led";
- reg = <0x132>;
- status = "disabled";
- };
-
- pm8058_led133: led@133 {
- compatible = "qcom,pm8058-led";
- reg = <0x133>;
- status = "disabled";
- };
-
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v3 17/32] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
2023-08-22 0:13 ` [PATCH v3 17/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
@ 2023-08-26 12:08 ` Konrad Dybcio
2023-08-26 13:49 ` Konrad Dybcio
1 sibling, 0 replies; 47+ messages in thread
From: Konrad Dybcio @ 2023-08-26 12:08 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> The PMIC is not a part of the SoC, so move PMIC to a separate file and
> include it from the board files.
>
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
[...]
> + pmic {
empty sub?
Konrad
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v3 17/32] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
2023-08-22 0:13 ` [PATCH v3 17/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
2023-08-26 12:08 ` Konrad Dybcio
@ 2023-08-26 13:49 ` Konrad Dybcio
1 sibling, 0 replies; 47+ messages in thread
From: Konrad Dybcio @ 2023-08-26 13:49 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> The PMIC is not a part of the SoC, so move PMIC to a separate file and
> include it from the board files.
>
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 18/32] ARM: dts: qcom: pm8058: reorder nodes
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (16 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 17/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 19/32] ARM: dts: qcom: pm8921: " Dmitry Baryshkov
` (13 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Move pm8058 device nodes to follow the alphanumberic sorting order.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8058.dtsi | 90 +++++++++++++++---------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
index ad581c3bcbd2..913a511719fa 100644
--- a/arch/arm/boot/dts/qcom/pm8058.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -8,15 +8,24 @@ pm8058: pmic {
#address-cells = <1>;
#size-cells = <0>;
- pm8058_gpio: gpio@150 {
- compatible = "qcom,pm8058-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8058_gpio 0 0 44>;
- #gpio-cells = <2>;
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8058_led48: led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ status = "disabled";
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
};
pm8058_mpps: mpps@50 {
@@ -30,13 +39,22 @@ pm8058_mpps: mpps@50 {
#interrupt-cells = <2>;
};
- pwrkey@1c {
- compatible = "qcom,pm8058-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
+ pm8058_led131: led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ status = "disabled";
+ };
+
+ pm8058_led132: led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ status = "disabled";
+ };
+
+ pm8058_led133: led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ status = "disabled";
};
pm8058_keypad: keypad@148 {
@@ -49,6 +67,17 @@ pm8058_keypad: keypad@148 {
row-hold = <91500>;
};
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
+ #gpio-cells = <2>;
+ };
+
pm8058_xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
@@ -109,35 +138,6 @@ rtc@1e8 {
interrupts = <39 1>;
allow-set-time;
};
-
- vibrator@4a {
- compatible = "qcom,pm8058-vib";
- reg = <0x4a>;
- };
-
- pm8058_led48: led@48 {
- compatible = "qcom,pm8058-keypad-led";
- reg = <0x48>;
- status = "disabled";
- };
-
- pm8058_led131: led@131 {
- compatible = "qcom,pm8058-led";
- reg = <0x131>;
- status = "disabled";
- };
-
- pm8058_led132: led@132 {
- compatible = "qcom,pm8058-led";
- reg = <0x132>;
- status = "disabled";
- };
-
- pm8058_led133: led@133 {
- compatible = "qcom,pm8058-led";
- reg = <0x133>;
- status = "disabled";
- };
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 19/32] ARM: dts: qcom: pm8921: reorder nodes
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (17 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 18/32] ARM: dts: qcom: pm8058: reorder nodes Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-26 10:28 ` Konrad Dybcio
2023-08-22 0:13 ` [PATCH v3 20/32] ARM: dts: qcom: pm8018: move reg property Dmitry Baryshkov
` (12 subsequent siblings)
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Move pm8921 device nodes to follow the alphanumberic sorting order.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 48 +++++++++++++++---------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index ad41d99ab265..4697ca33666f 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -8,17 +8,14 @@ pm8921: pmic {
#address-cells = <1>;
#size-cells = <0>;
- pm8921_gpio: gpio@150 {
-
- compatible = "qcom,pm8921-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8921_gpio 0 0 44>;
- #gpio-cells = <2>;
-
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8921>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
};
pm8921_mpps: mpps@50 {
@@ -32,14 +29,12 @@ pm8921_mpps: mpps@50 {
#interrupt-cells = <2>;
};
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
interrupt-parent = <&pm8921>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x11d>;
+ allow-set-time;
};
pm8921_keypad: keypad@148 {
@@ -53,12 +48,17 @@ pm8921_keypad: keypad@148 {
row-hold = <91500>;
};
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pm8921>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
};
pm8921_xoadc: xoadc@197 {
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 20/32] ARM: dts: qcom: pm8018: move reg property
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (18 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 19/32] ARM: dts: qcom: pm8921: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 21/32] ARM: dts: qcom: pm8921: " Dmitry Baryshkov
` (11 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Move reg property to come after compatible.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8018.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
index c602544900b2..85ab36b6d006 100644
--- a/arch/arm/boot/dts/qcom/pm8018.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -27,9 +27,9 @@ pwrkey@1c {
pm8018_mpps: mpps@50 {
compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pm8018_mpps 0 0 6>;
@@ -37,9 +37,9 @@ pm8018_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+ reg = <0x11d>;
interrupt-parent = <&pm8018>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
allow-set-time;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 21/32] ARM: dts: qcom: pm8921: move reg property
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (19 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 20/32] ARM: dts: qcom: pm8018: move reg property Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 22/32] ARM: dts: qcom: pm8058: use defined IRQ flags Dmitry Baryshkov
` (10 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Move reg property to come after compatible.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 4697ca33666f..fa00b57e28b9 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -31,9 +31,9 @@ pm8921_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
+ reg = <0x11d>;
interrupt-parent = <&pm8921>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
allow-set-time;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 22/32] ARM: dts: qcom: pm8058: use defined IRQ flags
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (20 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 21/32] ARM: dts: qcom: pm8921: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 23/32] ARM: dts: qcom: pm8921: switch to interrupts-extended Dmitry Baryshkov
` (9 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Use symbolic names for IRQ flags instead of using the numeric values.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8058.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
index 913a511719fa..3683d7b60918 100644
--- a/arch/arm/boot/dts/qcom/pm8058.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -12,7 +12,8 @@ pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -61,7 +62,8 @@ pm8058_keypad: keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
interrupt-parent = <&pm8058>;
- interrupts = <74 1>, <75 1>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+ <75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
@@ -135,7 +137,7 @@ rtc@1e8 {
compatible = "qcom,pm8058-rtc";
reg = <0x1e8>;
interrupt-parent = <&pm8058>;
- interrupts = <39 1>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
allow-set-time;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 23/32] ARM: dts: qcom: pm8921: switch to interrupts-extended
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (21 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 22/32] ARM: dts: qcom: pm8058: use defined IRQ flags Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 24/32] ARM: dts: qcom: pm8018: " Dmitry Baryshkov
` (8 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Merge interrups and interrupt-parent properties into a single
interrupts-extended property.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad DYbcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index fa00b57e28b9..360a179670c5 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -11,9 +11,8 @@ pm8921: pmic {
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pm8921>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -32,17 +31,15 @@ pm8921_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
reg = <0x11d>;
- interrupt-parent = <&pm8921>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
allow-set-time;
};
pm8921_keypad: keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
- interrupt-parent = <&pm8921>;
- interrupts = <74 IRQ_TYPE_EDGE_RISING>,
- <75 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+ <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 24/32] ARM: dts: qcom: pm8018: switch to interrupts-extended
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (22 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 23/32] ARM: dts: qcom: pm8921: switch to interrupts-extended Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 25/32] ARM: dts: qcom: pm8058: " Dmitry Baryshkov
` (7 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Merge interrups and interrupt-parent properties into a single
interrupts-extended property.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8018.dtsi | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
index 85ab36b6d006..22f3c7bac522 100644
--- a/arch/arm/boot/dts/qcom/pm8018.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -18,9 +18,8 @@ pwrkey@1c {
compatible = "qcom,pm8018-pwrkey",
"qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pm8018>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -38,8 +37,7 @@ pm8018_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
reg = <0x11d>;
- interrupt-parent = <&pm8018>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
allow-set-time;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 25/32] ARM: dts: qcom: pm8058: switch to interrupts-extended
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (23 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 24/32] ARM: dts: qcom: pm8018: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 26/32] ARM: dts: qcom: apq8064: move RPM regulators to board files Dmitry Baryshkov
` (6 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Merge interrups and interrupt-parent properties into a single
interrupts-extended property.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8058.dtsi | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
index 3683d7b60918..984b79777984 100644
--- a/arch/arm/boot/dts/qcom/pm8058.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -11,9 +11,8 @@ pm8058: pmic {
pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -61,9 +60,8 @@ pm8058_led133: led@133 {
pm8058_keypad: keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
- interrupt-parent = <&pm8058>;
- interrupts = <74 IRQ_TYPE_EDGE_RISING>,
- <75 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+ <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
@@ -136,8 +134,7 @@ ref_muxoff: adc-channel@f {
rtc@1e8 {
compatible = "qcom,pm8058-rtc";
reg = <0x1e8>;
- interrupt-parent = <&pm8058>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
allow-set-time;
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 26/32] ARM: dts: qcom: apq8064: move RPM regulators to board files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (24 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 25/32] ARM: dts: qcom: pm8058: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 27/32] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
` (5 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 49 ++++----
.../boot/dts/qcom/qcom-apq8064-cm-qs600.dts | 26 ++---
.../boot/dts/qcom/qcom-apq8064-ifc6410.dts | 33 +++---
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 105 ++++++++++--------
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 63 -----------
5 files changed, 115 insertions(+), 161 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index d5dee70620c2..1caa73e20bc9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -192,22 +192,20 @@ &mdp_dsi1_out {
&rpm {
regulators {
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
- vin_lvs2-supply = <&pm8921_s1>;
-
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
vdd_ncp-supply = <&pm8921_l6>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -216,7 +214,7 @@ s1 {
};
/* msm otg HSUSB_VDDCX */
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
@@ -229,55 +227,58 @@ s3 {
* tabla2x-slim-CDC_VDD_CP
* tabla2x-slim-VDDIO_CDC
*/
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
/* mipi_dsi.1-dsi1_pll_vdda */
- l2 {
+ pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* msm_otg-HSUSB_3p3 */
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
/* msm_otg-HSUSB_1p8 */
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/* msm_sdcc.1-sdc_vdd */
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-always-on;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
+ pm8921_l8: l8 {
+ };
+
/* mipi_dsi.1-dsi1_avdd */
- l11 {
+ pm8921_l11: l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
@@ -285,14 +286,14 @@ l11 {
};
/* pwm_power for backlight */
- l17 {
+ pm8921_l17: l17 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
/* camera, qdsp6 */
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
@@ -302,32 +303,32 @@ l23 {
* tabla2x-slim-CDC_VDDA_A_1P2V
* tabla2x-slim-VDDD_CDC_D
*/
- l25 {
+ pm8921_l25: l25 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
- lvs1 {
+ pm8921_lvs1: lvs1 {
bias-pull-down;
};
- lvs4 {
+ pm8921_lvs4: lvs4 {
bias-pull-down;
};
- lvs5 {
+ pm8921_lvs5: lvs5 {
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
/*
* mipi_dsi.1-dsi1_vddio
* pil_riva-pll_vdd
*/
- lvs7 {
+ pm8921_lvs7: lvs7 {
bias-pull-down;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index ffd654ab0b57..6472277d1c6d 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -85,10 +85,6 @@ pinconf {
&rpm {
regulators {
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
@@ -96,9 +92,12 @@ regulators {
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -106,52 +105,51 @@ s1 {
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
-
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index 12bf8ea3fb93..39c44fae9d14 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -196,10 +196,6 @@ pinconf {
&rpm {
regulators {
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
@@ -207,9 +203,12 @@ regulators {
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -217,59 +216,63 @@ s1 {
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- lvs1 {
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
- lvs6 {
+ pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 53dd9d79556f..6988bd212924 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -85,23 +85,36 @@ gpio_keys_pin_a: gpio-keys-active-state {
&riva {
pinctrl-names = "default";
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
status = "okay";
+
+ iris {
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
};
&rpm {
regulators {
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vin_lvs_1_3_6-supply = <&pm8921_s4>;
- vin_lvs_4_5_7-supply = <&pm8921_s4>;
- vin_ncp-supply = <&pm8921_l6>;
- vin_lvs2-supply = <&pm8921_s4>;
vin_l24-supply = <&pm8921_s1>;
vin_l25-supply = <&pm8921_s1>;
vin_l27-supply = <&pm8921_s7>;
vin_l28-supply = <&pm8921_s7>;
+ vin_lvs_1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs_4_5_7-supply = <&pm8921_s4>;
+ vin_ncp-supply = <&pm8921_l6>;
+
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -109,21 +122,21 @@ s1 {
bias-pull-down;
};
- s2 {
+ pm8921_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
- s4 {
+ pm8921_s4: s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -132,205 +145,207 @@ s4 {
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- s8 {
+ pm8921_s8: s8 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
/* PMOS LDO */
- l1 {
+ pm8921_l1: l1 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
bias-pull-down;
};
- l2 {
+ pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l7 {
+ pm8921_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l8 {
+ pm8921_l8: l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
- l9 {
+ pm8921_l9: l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l10 {
+ pm8921_l10: l10 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
- l11 {
+ pm8921_l11: l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l12 {
+ pm8921_l12: l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l14 {
+ pm8921_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l15 {
+ pm8921_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l16 {
+ pm8921_l16: l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
- l17 {
+ pm8921_l17: l17 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
- l18 {
+ pm8921_l18: l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l21 {
+ pm8921_l21: l21 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
- l22 {
+ pm8921_l22: l22 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l24 {
+ pm8921_l24: l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
- l25 {
+ pm8921_l25: l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
- l27 {
+ pm8921_l27: l27 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- l28 {
+ pm8921_l28: l28 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
- l29 {
+ pm8921_l29: l29 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
/* Low Voltage Switch */
- lvs1 {
+ pm8921_lvs1: lvs1 {
bias-pull-down;
};
- lvs2 {
+ pm8921_lvs2: lvs2 {
bias-pull-down;
};
- lvs3 {
+ pm8921_lvs3: lvs3 {
bias-pull-down;
};
- lvs4 {
+ pm8921_lvs4: lvs4 {
bias-pull-down;
};
- lvs5 {
+ pm8921_lvs5: lvs5 {
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
- lvs7 {
+ pm8921_lvs7: lvs7 {
bias-pull-down;
};
- usb-switch {};
+ pm8921_usb_switch: usb-switch {};
- hdmi-switch {};
+ pm8921_hdmi_switch: hdmi-switch {
+ bias-pull-down;
+ };
- ncp {
+ pm8921_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 88e722c023b3..d88c47d406a1 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -767,60 +767,6 @@ rpmcc: clock-controller {
clocks = <&pxo_board>, <&cxo_board>;
clock-names = "pxo", "cxo";
};
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
-
- pm8921_s1: s1 {};
- pm8921_s2: s2 {};
- pm8921_s3: s3 {};
- pm8921_s4: s4 {};
- pm8921_s7: s7 {};
- pm8921_s8: s8 {};
-
- pm8921_l1: l1 {};
- pm8921_l2: l2 {};
- pm8921_l3: l3 {};
- pm8921_l4: l4 {};
- pm8921_l5: l5 {};
- pm8921_l6: l6 {};
- pm8921_l7: l7 {};
- pm8921_l8: l8 {};
- pm8921_l9: l9 {};
- pm8921_l10: l10 {};
- pm8921_l11: l11 {};
- pm8921_l12: l12 {};
- pm8921_l14: l14 {};
- pm8921_l15: l15 {};
- pm8921_l16: l16 {};
- pm8921_l17: l17 {};
- pm8921_l18: l18 {};
- pm8921_l21: l21 {};
- pm8921_l22: l22 {};
- pm8921_l23: l23 {};
- pm8921_l24: l24 {};
- pm8921_l25: l25 {};
- pm8921_l26: l26 {};
- pm8921_l27: l27 {};
- pm8921_l28: l28 {};
- pm8921_l29: l29 {};
-
- pm8921_lvs1: lvs1 {};
- pm8921_lvs2: lvs2 {};
- pm8921_lvs3: lvs3 {};
- pm8921_lvs4: lvs4 {};
- pm8921_lvs5: lvs5 {};
- pm8921_lvs6: lvs6 {};
- pm8921_lvs7: lvs7 {};
-
- pm8921_usb_switch: usb-switch {};
-
- pm8921_hdmi_switch: hdmi-switch {
- bias-pull-down;
- };
-
- pm8921_ncp: ncp {};
- };
};
usb1: usb@12500000 {
@@ -1500,10 +1446,6 @@ riva: riva-pil@3200800 {
memory-region = <&wcnss_mem>;
- vddcx-supply = <&pm8921_s3>;
- vddmx-supply = <&pm8921_l24>;
- vddpx-supply = <&pm8921_s4>;
-
status = "disabled";
iris {
@@ -1511,11 +1453,6 @@ iris {
clocks = <&cxo_board>;
clock-names = "xo";
-
- vddxo-supply = <&pm8921_l4>;
- vddrfa-supply = <&pm8921_s2>;
- vddpa-supply = <&pm8921_l10>;
- vdddig-supply = <&pm8921_lvs2>;
};
smd-edge {
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 27/32] ARM: dts: qcom: mdm9615: move RPM regulators to board files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (25 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 26/32] ARM: dts: qcom: apq8064: move RPM regulators to board files Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 28/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
` (4 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 136 ++++++++++++++++++
arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 134 -----------------
2 files changed, 136 insertions(+), 134 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index cc264861afe5..1e1c66c7f9d2 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -130,6 +130,142 @@ &gsbi5_serial {
pinctrl-names = "default";
};
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8018-regulators";
+
+ vin_lvs1-supply = <&pm8018_s3>;
+
+ vdd_l7-supply = <&pm8018_s4>;
+ vdd_l8-supply = <&pm8018_s3>;
+ vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+ /* Buck SMPS */
+ pm8018_s1: s1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s2: s2 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s3: s3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s4: s4 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s5: s5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8018_l2: l2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l3: l3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l4: l4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8018_l5: l5 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8018_l8: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8018_l9: l9 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8018_l10: l10 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l11: l11 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l12: l12 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l13: l13 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8018_l14: l14 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8018_lvs1: lvs1 {
+ bias-pull-down;
+ };
+ };
+};
+
&sdcc1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index 11e5ab2708d7..c3325bc38d1f 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -342,140 +342,6 @@ rpm: rpm@108000 {
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8018-regulators";
-
- vin_lvs1-supply = <&pm8018_s3>;
-
- vdd_l7-supply = <&pm8018_s4>;
- vdd_l8-supply = <&pm8018_s3>;
- vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
- /* Buck SMPS */
- pm8018_s1: s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1150000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s2: s2 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s3: s3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s4: s4 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2200000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s5: s5 {
- regulator-always-on;
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- /* PMOS LDO */
- pm8018_l2: l2 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- pm8018_l3: l3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- pm8018_l4: l4 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- pm8018_l5: l5 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- pm8018_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- pm8018_l7: l7 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- pm8018_l8: l8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- bias-pull-down;
- };
-
- pm8018_l9: l9 {
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1150000>;
- bias-pull-down;
- };
-
- pm8018_l10: l10 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l11: l11 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l12: l12 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l13: l13 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- pm8018_l14: l14 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- /* Low Voltage Switch */
- pm8018_lvs1: lvs1 {
- bias-pull-down;
- };
- };
};
};
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 28/32] ARM: dts: qcom: msm8660: move RPM regulators to board files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (26 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 27/32] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 29/32] ARM: dts: qcom: msm8960: drop useless rpm regulators node Dmitry Baryshkov
` (3 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../dts/qcom/qcom-apq8060-dragonboard.dts | 141 ++++++++++++------
arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 10 ++
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 66 --------
3 files changed, 102 insertions(+), 115 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 20de516a8deb..8a511f69d800 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -449,6 +449,8 @@ &rpm {
* that means
*/
regulators-0 {
+ compatible = "qcom,rpm-pm8901-regulators";
+
vdd_l0-supply = <&pm8901_s4>;
vdd_l1-supply = <&vph>;
vdd_l2-supply = <&vph>;
@@ -466,57 +468,63 @@ regulators-0 {
lvs3_in-supply = <&pm8058_s2>;
mvs_in-supply = <&pm8058_s3>;
- l0 {
+ pm8901_l0: l0 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l1 {
+
+ pm8901_l1: l1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l2 {
+
+ pm8901_l2: l2 {
/* TMA340 requires strictly 3.3V */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l3 {
+
+ pm8901_l3: l3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+
+ pm8901_l4: l4 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l5 {
+
+ pm8901_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l6 {
+
+ pm8901_l6: l6 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
bias-pull-down;
};
/* s0 and s1 are SAW regulators controlled over SPM */
- s2 {
+ pm8901_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+ pm8901_s3: s3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s4 {
+ pm8901_s4: s4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <1600000>;
@@ -524,17 +532,22 @@ s4 {
};
/* LVS0 thru 3 and mvs are just switches */
- lvs0 {
+ pm8901_lvs0: lvs0 {
regulator-always-on;
};
- lvs1 { };
- lvs2 { };
- lvs3 { };
- mvs { };
+ pm8901_lvs1: lvs1 { };
+
+ pm8901_lvs2: lvs2 { };
+
+ pm8901_lvs3: lvs3 { };
+
+ pm8901_mvs: mvs { };
};
regulators-1 {
+ compatible = "qcom,rpm-pm8058-regulators";
+
vdd_l0_l1_lvs-supply = <&pm8058_s3>;
vdd_l2_l11_l12-supply = <&vph>;
vdd_l3_l4_l5-supply = <&vph>;
@@ -556,144 +569,169 @@ regulators-1 {
vdd_s4-supply = <&vph>;
vdd_ncp-supply = <&vph>;
- l0 {
+ pm8058_l0: l0 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l1 {
+
+ pm8058_l1: l1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l2 {
+
+ pm8058_l2: l2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l3 {
+
+ pm8058_l3: l3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l4 {
+
+ pm8058_l4: l4 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l5 {
+
+ pm8058_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l6 {
+
+ pm8058_l6: l6 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3600000>;
bias-pull-down;
};
- l7 {
+
+ pm8058_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l8 {
+
+ pm8058_l8: l8 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3050000>;
bias-pull-down;
};
- l9 {
+
+ pm8058_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l10 {
+
+ pm8058_l10: l10 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l11 {
+
+ pm8058_l11: l11 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
bias-pull-down;
};
- l12 {
+
+ pm8058_l12: l12 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
- l13 {
+
+ pm8058_l13: l13 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
bias-pull-down;
};
- l14 {
+
+ pm8058_l14: l14 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- l15 {
+
+ pm8058_l15: l15 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l16 {
+
+ pm8058_l16: l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
regulator-always-on;
};
- l17 {
+
+ pm8058_l17: l17 {
// 1.5V according to schematic
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l18 {
+
+ pm8058_l18: l18 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
bias-pull-down;
};
- l19 {
+
+ pm8058_l19: l19 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
bias-pull-down;
};
- l20 {
+
+ pm8058_l20: l20 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l21 {
+
+ pm8058_l21: l21 {
// 1.1 V according to schematic
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
regulator-always-on;
};
- l22 {
+
+ pm8058_l22: l22 {
// 1.2 V according to schematic
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
- l23 {
+
+ pm8058_l23: l23 {
// Unused
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l24 {
+
+ pm8058_l24: l24 {
// Unused
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l25 {
+
+ pm8058_l25: l25 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- s0 {
+ pm8058_s0: s0 {
// regulator-min-microvolt = <500000>;
// regulator-max-microvolt = <1325000>;
regulator-min-microvolt = <1100000>;
@@ -701,7 +739,8 @@ s0 {
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s1 {
+
+ pm8058_s1: s1 {
// regulator-min-microvolt = <500000>;
// regulator-max-microvolt = <1250000>;
regulator-min-microvolt = <1100000>;
@@ -709,21 +748,24 @@ s1 {
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s2 {
+
+ pm8058_s2: s2 {
// 1.3 V according to schematic
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+
+ pm8058_s3: s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
regulator-always-on;
bias-pull-down;
};
- s4 {
+
+ pm8058_s4: s4 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
@@ -732,14 +774,15 @@ s4 {
};
/* LVS0 and LVS1 are just switches */
- lvs0 {
+ pm8058_lvs0: lvs0 {
bias-pull-down;
};
- lvs1 {
+
+ pm8058_lvs1: lvs1 {
bias-pull-down;
};
- ncp {
+ pm8058_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index 04dca0c93971..43e646ded7bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -61,6 +61,16 @@ MATRIX_KEY(5, 4, KEY_MENU)
keypad,num-columns = <5>;
};
+&rpm {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8901-regulators";
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8058-regulators";
+ };
+};
+
/* eMMC */
&sdcc1 {
vmmc-supply = <&vsdcc_fixed>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index b8094b7c09fc..c2cb3abd5177 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -352,72 +352,6 @@ rpmcc: clock-controller {
clocks = <&pxo_board>;
clock-names = "pxo";
};
-
- regulators-0 {
- compatible = "qcom,rpm-pm8901-regulators";
-
- pm8901_l0: l0 {};
- pm8901_l1: l1 {};
- pm8901_l2: l2 {};
- pm8901_l3: l3 {};
- pm8901_l4: l4 {};
- pm8901_l5: l5 {};
- pm8901_l6: l6 {};
-
- /* S0 and S1 Handled as SAW regulators by SPM */
- pm8901_s2: s2 {};
- pm8901_s3: s3 {};
- pm8901_s4: s4 {};
-
- pm8901_lvs0: lvs0 {};
- pm8901_lvs1: lvs1 {};
- pm8901_lvs2: lvs2 {};
- pm8901_lvs3: lvs3 {};
-
- pm8901_mvs: mvs {};
- };
-
- regulators-1 {
- compatible = "qcom,rpm-pm8058-regulators";
-
- pm8058_l0: l0 {};
- pm8058_l1: l1 {};
- pm8058_l2: l2 {};
- pm8058_l3: l3 {};
- pm8058_l4: l4 {};
- pm8058_l5: l5 {};
- pm8058_l6: l6 {};
- pm8058_l7: l7 {};
- pm8058_l8: l8 {};
- pm8058_l9: l9 {};
- pm8058_l10: l10 {};
- pm8058_l11: l11 {};
- pm8058_l12: l12 {};
- pm8058_l13: l13 {};
- pm8058_l14: l14 {};
- pm8058_l15: l15 {};
- pm8058_l16: l16 {};
- pm8058_l17: l17 {};
- pm8058_l18: l18 {};
- pm8058_l19: l19 {};
- pm8058_l20: l20 {};
- pm8058_l21: l21 {};
- pm8058_l22: l22 {};
- pm8058_l23: l23 {};
- pm8058_l24: l24 {};
- pm8058_l25: l25 {};
-
- pm8058_s0: s0 {};
- pm8058_s1: s1 {};
- pm8058_s2: s2 {};
- pm8058_s3: s3 {};
- pm8058_s4: s4 {};
-
- pm8058_lvs0: lvs0 {};
- pm8058_lvs1: lvs1 {};
-
- pm8058_ncp: ncp {};
- };
};
amba {
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 29/32] ARM: dts: qcom: msm8960: drop useless rpm regulators node
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (27 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 28/32] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 30/32] ARM: dts: qcom: msm8974: move regulators to board files Dmitry Baryshkov
` (2 subsequent siblings)
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The set of regulators available over the RPM requests is not a property
of the SoC. The only msm8960 board file (qcom-msm8960-cdp) also defines
this node together with the compatible string. Drop the useless device
node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 4a6b22bed1e4..56f8ba07df54 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@ rpm: rpm@108000 {
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
- };
};
acc0: clock-controller@2088000 {
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 30/32] ARM: dts: qcom: msm8974: move regulators to board files
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (28 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 29/32] ARM: dts: qcom: msm8960: drop useless rpm regulators node Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 31/32] ARM: dts: qcom: pm8921: Disable keypad by default Dmitry Baryshkov
2023-08-22 0:13 ` [PATCH v3 32/32] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel Dmitry Baryshkov
31 siblings, 0 replies; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
The vph-pwr and boost regulators (even if they are unified by design)
are not a property of SoC, so move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../dts/qcom/qcom-apq8074-dragonboard.dts | 27 +++++++++++++++++++
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 27 +++++++++++++++++++
.../qcom/qcom-msm8974-sony-xperia-rhine.dtsi | 27 +++++++++++++++++++
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 27 -------------------
.../qcom/qcom-msm8974pro-fairphone-fp2.dts | 27 +++++++++++++++++++
.../qcom/qcom-msm8974pro-oneplus-bacon.dts | 27 +++++++++++++++++++
.../dts/qcom/qcom-msm8974pro-samsung-klte.dts | 10 ++++++-
...-msm8974pro-sony-xperia-shinano-castor.dts | 27 +++++++++++++++++++
8 files changed, 171 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 950fa652f985..d7fb3e0e8886 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -49,6 +49,33 @@ mpss_region: mpss@ac00000 {
no-map;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_uart2 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index da99f770d4f5..ca402b4a68bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -60,6 +60,33 @@ vibrator {
enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
};
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 23ae474698aa..a43341ae4495 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -65,6 +65,33 @@ ramoops@3e8e0000 {
pmsg-size = <0x80000>;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 706fef53767e..d54be72fe3b2 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -2376,31 +2376,4 @@ timer {
<GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
-
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&boost_bypass_n_pin>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 6c4153689b39..66c422004dcd 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -57,6 +57,33 @@ vibrator {
enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index c0ca264d8140..6d1412aec45a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -51,6 +51,33 @@ event-hall-sensor {
debounce-interval = <150>;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c1 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 325feb89b343..ca3aa16b4b10 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -155,7 +155,15 @@ vreg_panel: panel-regulator {
enable-active-high;
};
- /delete-node/ vreg-boost;
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 0798cce3dbea..818ff5835031 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -84,6 +84,33 @@ vreg_vsp: lcd-dcdc-regulator {
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
};
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 31/32] ARM: dts: qcom: pm8921: Disable keypad by default
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (29 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 30/32] ARM: dts: qcom: msm8974: move regulators to board files Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-26 10:27 ` Konrad Dybcio
2023-08-22 0:13 ` [PATCH v3 32/32] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel Dmitry Baryshkov
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Since keypad is used only by some devices, disable it by default and enable explicitly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 1 +
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 360a179670c5..058962af3005 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -43,6 +43,7 @@ pm8921_keypad: keypad@148 {
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
+ status = "disabled";
};
pm8921_gpio: gpio@150 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 414881d34c60..9175f29e7ae3 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -98,6 +98,8 @@ MATRIX_KEY(0, 3, KEY_CAMERA)
>;
keypad,num-rows = <1>;
keypad,num-columns = <5>;
+
+ status = "okay";
};
&rpm {
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v3 32/32] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
2023-08-22 0:13 [PATCH v3 00/32] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
` (30 preceding siblings ...)
2023-08-22 0:13 ` [PATCH v3 31/32] ARM: dts: qcom: pm8921: Disable keypad by default Dmitry Baryshkov
@ 2023-08-22 0:13 ` Dmitry Baryshkov
2023-08-26 10:25 ` Konrad Dybcio
31 siblings, 1 reply; 47+ messages in thread
From: Dmitry Baryshkov @ 2023-08-22 0:13 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski
Cc: linux-arm-msm, devicetree, linux-input
Use generic `adc-channel@N' node names for board-specific ADC channels
(routed to MPP pins) to follow the schema.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 8a511f69d800..26066c76e088 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -994,23 +994,27 @@ &pm8058_xoadc {
xoadc-ref-supply = <&pm8058_l18>;
/* Board-specific channels */
- mpp5@5 {
+ adc-channel@5 {
/* Connected to AOUT of ALS sensor */
reg = <0x00 0x05>;
};
- mpp6@6 {
+
+ adc-channel@6 {
/* Connected to test point TP43 */
reg = <0x00 0x06>;
};
- mpp7@7 {
+
+ adc-channel@7 {
/* Connected to battery thermistor */
reg = <0x00 0x07>;
};
- mpp8@8 {
+
+ adc-channel@8 {
/* Connected to battery ID detector */
reg = <0x00 0x08>;
};
- mpp9@9 {
+
+ adc-channel@9 {
/* Connected to XO thermistor */
reg = <0x00 0x09>;
};
--
2.39.2
^ permalink raw reply related [flat|nested] 47+ messages in thread