[PATCH v4 00/42] ep93xx device tree conversion

[PATCH v4 00/42] ep93xx device tree conversion

[Nikita Shubin via B4 Relay]

This series aims to convert ep93xx from platform to full device tree support.

The main goal is to receive ACK's to take it via Arnd's arm-soc branch.

Major changes:
- drop newline at the end from each YAML files
- rename dma and clk bindings headers to match first compatible
- shrink SoC exported functions number to only 2
- dropped some ep93xx_pata fixes from these series
- dropped m48t86 stuff from these series

Bit thanks to Andy Shevchenko for thorough review.

Some parts are were sent in advance, so these series depends on the
following:

Link: https://lore.kernel.org/all/20230823-m48t86_device_tree-v2-0-21ff275f949d@maquefel.me/
Link: https://lore.kernel.org/all/20230823-ep93xx_pata_fixes-v1-0-d7e7229be148@maquefel.me/

---
Changes in v4:

- gpio: ep93xx: split device in multiple
  - s/generic_handle_irq/generic_handle_domain_irq/
  - s/int offset/irq_hw_number_t offset/ though now it looks a bit odd to me
  - drop i = 0
  - drop 'error'
  - use dev_err_probe withour printing devname once again

dt-bindings: clock: Add Cirrus EP93xx
  - renamed cirrus,ep93xx-clock.h -> cirrus,ep9301-clk.h

clk: ep93xx: add DT support for Cirrus EP93xx
  - drop unused includes
  - use .name only for xtali, pll1, pll2 parents
  - convert // to /*
  - pass clk_parent_data instead of char* clock name

dt-bindings: pinctrl: Add Cirrus EP93xx
  - s/additionalProperties/unevaluatedProperties/

dt-bindings: soc: Add Cirrus EP93xx
  - move syscon to soc directory
  - add vendor prefix
  - make reboot same style as pinctrl, clk
  - use absolute path for ref
  - expand example

soc: Add SoC driver for Cirrus ep93xx
  - s/0xf0000000/GENMASK(31, 28)/
  - s/ret/ep93xx_chip_revision(map)/
  - drop symbol exports
  - convert to platform driver

dt-bindings: rtc: Add Cirrus EP93xx
  - allOf: with $ref to rtc.yaml
  - s/additionalProperties/unevaluatedProperties/

dt-bindings: watchdog: Add Cirrus EP93x
  - drop description
  - reword

power: reset: Add a driver for the ep93xx reset
  - lets use 'GPL-2.0+' instead of '(GPL-2.0)'
  - s/of_device/of/
  - drop mdelay with warning
  - return 0 at the end

net: cirrus: add DT support for Cirrus EP93xx
  - fix leaking np

mtd: nand: add support for ts72xx
  - +bits.h
  - drop comment
  - ok to fwnode_get_next_child_node
  - use goto to put handle and nand and report error

ARM: dts: add Cirrus EP93XX SoC .dtsi
  - add simple-bus for ebi, as we don't require to setup anything
  - add arm,pl011 compatible to uart nodes
  - drop i2c-gpio, as it's isn't used anywhere

ARM: dts: ep93xx: add ts7250 board
  - generic node name for temperature-sensor
  - drop i2c
  - move nand, rtc, watchdog to ebi node
 
- Link to v3: https://lore.kernel.org/r/20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me

---
Alexander Sverdlin (2):
      ARM: dts: ep93xx: Add EDB9302 DT
      ASoC: cirrus: edb93xx: Delete driver

Nikita Shubin (40):
      gpio: ep93xx: split device in multiple
      ARM: ep93xx: add swlocked prototypes
      dt-bindings: clock: Add Cirrus EP93xx
      clk: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: pinctrl: Add Cirrus EP93xx
      pinctrl: add a Cirrus ep93xx SoC pin controller
      dt-bindings: power: reset: Add ep93xx reset
      power: reset: Add a driver for the ep93xx reset
      dt-bindings: soc: Add Cirrus EP93xx
      soc: Add SoC driver for Cirrus ep93xx
      dt-bindings: timers: Add Cirrus EP93xx
      clocksource: ep93xx: Add driver for Cirrus Logic EP93xx
      dt-bindings: rtc: Add Cirrus EP93xx
      rtc: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: watchdog: Add Cirrus EP93x
      watchdog: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: pwm: Add Cirrus EP93xx
      pwm: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: spi: Add Cirrus EP93xx
      spi: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: net: Add Cirrus EP93xx
      net: cirrus: add DT support for Cirrus EP93xx
      dt-bindings: dma: Add Cirrus EP93xx
      dma: cirrus: add DT support for Cirrus EP93xx
      dt-bindings: mtd: Add ts7200 nand-controller
      mtd: nand: add support for ts72xx
      dt-bindings: ata: Add Cirrus EP93xx
      ata: pata_ep93xx: add device tree support
      dt-bindings: input: Add Cirrus EP93xx keypad
      input: keypad: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: wdt: Add ts72xx
      wdt: ts72xx: add DT support for ts72xx
      gpio: ep93xx: add DT support for gpio-ep93xx
      ARM: dts: add Cirrus EP93XX SoC .dtsi
      ARM: dts: ep93xx: add ts7250 board
      ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
      pwm: ep93xx: drop legacy pinctrl
      ata: pata_ep93xx: remove legacy pinctrl use
      ARM: ep93xx: delete all boardfiles
      ARM: ep93xx: soc: drop defines

 .../bindings/arm/cirrus/cirrus,ep9301.yaml         |   38 +
 .../bindings/ata/cirrus,ep9312-pata.yaml           |   42 +
 .../bindings/clock/cirrus,ep9301-clk.yaml          |   46 +
 .../bindings/dma/cirrus,ep9301-dma-m2m.yaml        |   69 +
 .../bindings/dma/cirrus,ep9301-dma-m2p.yaml        |  121 ++
 .../bindings/input/cirrus,ep9307-keypad.yaml       |   87 ++
 .../devicetree/bindings/mtd/technologic,nand.yaml  |   45 +
 .../devicetree/bindings/net/cirrus,ep9301-eth.yaml |   59 +
 .../bindings/pinctrl/cirrus,ep9301-pinctrl.yaml    |   57 +
 .../bindings/power/reset/cirrus,ep9301-reboot.yaml |   34 +
 .../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml |   46 +
 .../devicetree/bindings/rtc/cirrus,ep9301-rtc.yaml |   42 +
 .../bindings/soc/cirrus/cirrus,ep9301-syscon.yaml  |   71 +
 .../devicetree/bindings/spi/cirrus,ep9301-spi.yaml |   61 +
 .../bindings/timer/cirrus,ep9301-timer.yaml        |   49 +
 .../bindings/watchdog/cirrus,ep9301-wdt.yaml       |   42 +
 .../bindings/watchdog/technologic,ts7200-wdt.yaml  |   45 +
 arch/arm/Makefile                                  |    1 -
 arch/arm/boot/dts/cirrus/Makefile                  |    4 +
 arch/arm/boot/dts/cirrus/ep93xx-bk3.dts            |  124 ++
 arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts        |  180 +++
 arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts         |  143 ++
 arch/arm/boot/dts/cirrus/ep93xx.dtsi               |  454 +++++++
 arch/arm/mach-ep93xx/Kconfig                       |   20 +-
 arch/arm/mach-ep93xx/Makefile                      |   11 -
 arch/arm/mach-ep93xx/clock.c                       |  733 ----------
 arch/arm/mach-ep93xx/core.c                        | 1017 --------------
 arch/arm/mach-ep93xx/dma.c                         |  114 --
 arch/arm/mach-ep93xx/edb93xx.c                     |  344 -----
 arch/arm/mach-ep93xx/ep93xx-regs.h                 |   38 -
 arch/arm/mach-ep93xx/gpio-ep93xx.h                 |  111 --
 arch/arm/mach-ep93xx/hardware.h                    |   25 -
 arch/arm/mach-ep93xx/irqs.h                        |   76 --
 arch/arm/mach-ep93xx/platform.h                    |   42 -
 arch/arm/mach-ep93xx/soc.h                         |  212 ---
 arch/arm/mach-ep93xx/ts72xx.c                      |  422 ------
 arch/arm/mach-ep93xx/ts72xx.h                      |   94 --
 arch/arm/mach-ep93xx/vision_ep9307.c               |  311 -----
 drivers/ata/pata_ep93xx.c                          |   33 +-
 drivers/clk/Kconfig                                |    8 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/clk-ep93xx.c                           |  753 +++++++++++
 drivers/clocksource/Kconfig                        |   11 +
 drivers/clocksource/Makefile                       |    1 +
 .../clocksource}/timer-ep93xx.c                    |  155 ++-
 drivers/dma/ep93xx_dma.c                           |  125 +-
 drivers/gpio/gpio-ep93xx.c                         |  331 ++---
 drivers/input/keyboard/ep93xx_keypad.c             |   74 +-
 drivers/mtd/nand/raw/Kconfig                       |    7 +
 drivers/mtd/nand/raw/Makefile                      |    1 +
 drivers/mtd/nand/raw/technologic-nand-controller.c |  166 +++
 drivers/net/ethernet/cirrus/ep93xx_eth.c           |   63 +-
 drivers/pinctrl/Kconfig                            |    7 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-ep93xx.c                   | 1429 ++++++++++++++++++++
 drivers/power/reset/Kconfig                        |   10 +
 drivers/power/reset/Makefile                       |    1 +
 drivers/power/reset/ep93xx-restart.c               |   85 ++
 drivers/pwm/pwm-ep93xx.c                           |   26 +-
 drivers/rtc/rtc-ep93xx.c                           |    8 +
 drivers/soc/Kconfig                                |    1 +
 drivers/soc/Makefile                               |    1 +
 drivers/soc/cirrus/Kconfig                         |   12 +
 drivers/soc/cirrus/Makefile                        |    2 +
 drivers/soc/cirrus/soc-ep93xx.c                    |  215 +++
 drivers/spi/spi-ep93xx.c                           |   28 +-
 drivers/watchdog/ep93xx_wdt.c                      |    8 +
 drivers/watchdog/ts72xx_wdt.c                      |    8 +
 include/dt-bindings/clock/cirrus,ep9301-clk.h      |   41 +
 include/dt-bindings/dma/cirrus,ep93xx-dma.h        |   26 +
 include/linux/platform_data/dma-ep93xx.h           |   25 +-
 include/linux/platform_data/eth-ep93xx.h           |   10 -
 include/linux/platform_data/keypad-ep93xx.h        |   32 -
 include/linux/soc/cirrus/ep93xx.h                  |   29 +-
 sound/soc/cirrus/Kconfig                           |    9 -
 sound/soc/cirrus/Makefile                          |    4 -
 sound/soc/cirrus/edb93xx.c                         |  117 --
 77 files changed, 5126 insertions(+), 4168 deletions(-)
---
base-commit: bdc09c8e8b16d494ccd1c56e903e78dd76455a35
change-id: 20230605-ep93xx-01c76317e2d2

Best regards,
-- 
Nikita Shubin <nikita.shubin@maquefel.me>

[PATCH v4 29/42] dt-bindings: input: Add Cirrus EP93xx keypad

[Nikita Shubin via B4 Relay]

From: Nikita Shubin <nikita.shubin@maquefel.me>

Add YAML bindings for ep93xx SoC keypad.

Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
 .../bindings/input/cirrus,ep9307-keypad.yaml       | 87 ++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
new file mode 100644
index 000000000000..ac020c9f564a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus ep93xx keypad
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description:
+  The KPP is designed to interface with a keypad matrix with 2-point contact
+  or 3-point contact keys. The KPP is designed to simplify the software task
+  of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+  and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9307-keypad
+      - items:
+          - enum:
+              - cirrus,ep9312-keypad
+              - cirrus,ep9315-keypad
+          - const: cirrus,ep9307-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  debounce-delay-ms:
+    description: |
+          Time in microseconds that key must be pressed or
+          released for state change interrupt to trigger.
+
+  cirrus,prescale:
+    description: row/column counter pre-scaler load value
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 1023
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,ep9301-clk.h>
+    #include <dt-bindings/input/input.h>
+    keypad@800f0000 {
+        compatible = "cirrus,ep9307-keypad";
+        reg = <0x800f0000 0x0c>;
+        interrupt-parent = <&vic0>;
+        interrupts = <29>;
+        clocks = <&eclk EP93XX_CLK_KEYPAD>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&keypad_default_pins>;
+        linux,keymap = <KEY_UP>,
+                       <KEY_DOWN>,
+                       <KEY_VOLUMEDOWN>,
+                       <KEY_HOME>,
+                       <KEY_RIGHT>,
+                       <KEY_LEFT>,
+                       <KEY_ENTER>,
+                       <KEY_VOLUMEUP>,
+                       <KEY_F6>,
+                       <KEY_F8>,
+                       <KEY_F9>,
+                       <KEY_F10>,
+                       <KEY_F1>,
+                       <KEY_F2>,
+                       <KEY_F3>,
+                       <KEY_POWER>;
+    };

-- 
2.39.2

[PATCH v4 30/42] input: keypad: ep93xx: add DT support for Cirrus EP93xx

[Nikita Shubin via B4 Relay]

From: Nikita Shubin <nikita.shubin@maquefel.me>

- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
 arch/arm/mach-ep93xx/core.c            | 46 ---------------------
 drivers/input/keyboard/ep93xx_keypad.c | 74 ++++++++++------------------------
 include/linux/soc/cirrus/ep93xx.h      |  4 --
 3 files changed, 22 insertions(+), 102 deletions(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index c81a2e84821b..c60a9d3632dd 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -696,52 +696,6 @@ void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
 	platform_device_register(&ep93xx_keypad_device);
 }
 
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_c;
-		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_d;
-	}
-
-	/* Enable the keypad controller; GPIO ports C and D used for keypad */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK);
-
-	return 0;
-
-fail_gpio_d:
-	gpio_free(EP93XX_GPIO_LINE_C(i));
-fail_gpio_c:
-	for (--i; i >= 0; --i) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
-
-void ep93xx_keypad_release_gpio(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-
-	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK);
-}
-EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
-
 /*************************************************************************
  * EP93xx I2S audio peripheral handling
  *************************************************************************/
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 55075addcac2..bc302f0fd0b3 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -6,20 +6,13 @@
  *
  * Based on the pxa27x matrix keypad controller by Rodolfo Giometti.
  *
- * NOTE:
- *
- * The 3-key reset is triggered by pressing the 3 keys in
- * Row 0, Columns 2, 4, and 7 at the same time.  This action can
- * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag.
- *
- * Normal operation for the matrix does not autorepeat the key press.
- * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT
- * flag.
  */
 
 #include <linux/bits.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -27,7 +20,6 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/slab.h>
 #include <linux/soc/cirrus/ep93xx.h>
-#include <linux/platform_data/keypad-ep93xx.h>
 #include <linux/pm_wakeirq.h>
 
 /*
@@ -61,12 +53,16 @@
 #define KEY_REG_KEY1_MASK	GENMASK(5, 0)
 #define KEY_REG_KEY1_SHIFT	0
 
+#define EP93XX_MATRIX_ROWS		(8)
+#define EP93XX_MATRIX_COLS		(8)
+
 #define EP93XX_MATRIX_SIZE	(EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS)
 
 struct ep93xx_keypad {
-	struct ep93xx_keypad_platform_data *pdata;
 	struct input_dev *input_dev;
 	struct clk *clk;
+	unsigned int	debounce;
+	uint16_t	prescale;
 
 	void __iomem *mmio_base;
 
@@ -133,23 +129,11 @@ static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
 
 static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
 {
-	struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
 	unsigned int val = 0;
 
-	clk_set_rate(keypad->clk, pdata->clk_rate);
-
-	if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
-		val |= KEY_INIT_DIS3KY;
-	if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE)
-		val |= KEY_INIT_DIAG;
-	if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE)
-		val |= KEY_INIT_BACK;
-	if (pdata->flags & EP93XX_KEYPAD_TEST_MODE)
-		val |= KEY_INIT_T2;
-
-	val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
+	val |= ((keypad->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
 
-	val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
+	val |= ((keypad->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
 
 	__raw_writel(val, keypad->mmio_base + KEY_INIT);
 }
@@ -220,17 +204,10 @@ static int ep93xx_keypad_resume(struct device *dev)
 static DEFINE_SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
 				ep93xx_keypad_suspend, ep93xx_keypad_resume);
 
-static void ep93xx_keypad_release_gpio_action(void *_pdev)
-{
-	struct platform_device *pdev = _pdev;
-
-	ep93xx_keypad_release_gpio(pdev);
-}
-
 static int ep93xx_keypad_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct ep93xx_keypad *keypad;
-	const struct matrix_keymap_data *keymap_data;
 	struct input_dev *input_dev;
 	int err;
 
@@ -238,14 +215,6 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	if (!keypad)
 		return -ENOMEM;
 
-	keypad->pdata = dev_get_platdata(&pdev->dev);
-	if (!keypad->pdata)
-		return -EINVAL;
-
-	keymap_data = keypad->pdata->keymap_data;
-	if (!keymap_data)
-		return -EINVAL;
-
 	keypad->irq = platform_get_irq(pdev, 0);
 	if (keypad->irq < 0)
 		return keypad->irq;
@@ -254,19 +223,13 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	if (IS_ERR(keypad->mmio_base))
 		return PTR_ERR(keypad->mmio_base);
 
-	err = ep93xx_keypad_acquire_gpio(pdev);
-	if (err)
-		return err;
-
-	err = devm_add_action_or_reset(&pdev->dev,
-				       ep93xx_keypad_release_gpio_action, pdev);
-	if (err)
-		return err;
-
 	keypad->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk))
 		return PTR_ERR(keypad->clk);
 
+	device_property_read_u32(dev, "debounce-delay-ms", &keypad->debounce);
+	device_property_read_u16(dev, "cirrus,prescale", &keypad->prescale);
+
 	input_dev = devm_input_allocate_device(&pdev->dev);
 	if (!input_dev)
 		return -ENOMEM;
@@ -278,13 +241,13 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	input_dev->open = ep93xx_keypad_open;
 	input_dev->close = ep93xx_keypad_close;
 
-	err = matrix_keypad_build_keymap(keymap_data, NULL,
+	err = matrix_keypad_build_keymap(NULL, NULL,
 					 EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
 					 keypad->keycodes, input_dev);
 	if (err)
 		return err;
 
-	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
+	if (device_property_read_bool(&pdev->dev, "autorepeat"))
 		__set_bit(EV_REP, input_dev->evbit);
 	input_set_drvdata(input_dev, keypad);
 
@@ -315,10 +278,17 @@ static int ep93xx_keypad_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id ep93xx_keypad_of_ids[] = {
+	{ .compatible = "cirrus,ep9307-keypad" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_keypad_of_ids);
+
 static struct platform_driver ep93xx_keypad_driver = {
 	.driver		= {
 		.name	= "ep93xx-keypad",
 		.pm	= pm_sleep_ptr(&ep93xx_keypad_pm_ops),
+		.of_match_table = ep93xx_keypad_of_ids,
 	},
 	.probe		= ep93xx_keypad_probe,
 	.remove		= ep93xx_keypad_remove,
diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h
index 267529ee2b3d..4327f66b7cf5 100644
--- a/include/linux/soc/cirrus/ep93xx.h
+++ b/include/linux/soc/cirrus/ep93xx.h
@@ -16,8 +16,6 @@ int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
 void ep93xx_ide_release_gpio(struct platform_device *pdev);
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
-void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 int ep93xx_i2s_acquire(void);
 void ep93xx_i2s_release(void);
 unsigned int ep93xx_chip_revision(void);
@@ -27,8 +25,6 @@ static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return
 static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {}
 static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; }
 static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {}
-static inline int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) { return 0; }
-static inline void ep93xx_keypad_release_gpio(struct platform_device *pdev) {}
 static inline int ep93xx_i2s_acquire(void) { return 0; }
 static inline void ep93xx_i2s_release(void) {}
 static inline unsigned int ep93xx_chip_revision(void) { return 0; }

-- 
2.39.2

Re: [PATCH v4 29/42] dt-bindings: input: Add Cirrus EP93xx keypad

[Krzysztof Kozlowski]

On 15/09/2023 10:11, Nikita Shubin via B4 Relay wrote:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
> 
> Add YAML bindings for ep93xx SoC keypad.
> 
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v4 30/42] input: keypad: ep93xx: add DT support for Cirrus EP93xx

[Andy Shevchenko]

On Fri, Sep 15, 2023 at 11:11:12AM +0300, Nikita Shubin via B4 Relay wrote:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
> 
> - drop flags, they were not used anyway
> - add OF ID match table
> - process "autorepeat", "debounce-delay-ms", prescale from device tree
> - drop platform data usage and it's header
> - keymap goes from device tree now on

...

>  #include <linux/bits.h>
>  #include <linux/module.h>
> +#include <linux/of.h>

Is this correct header? Shouldn't be property.h?

>  #include <linux/platform_device.h>

> +#include <linux/mod_devicetable.h>

Can you. please, try to squeeze them to most ordered parts?

>  #include <linux/interrupt.h>
>  #include <linux/clk.h>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 00/42] ep93xx device tree conversion

[Andy Shevchenko]

On Fri, Sep 15, 2023 at 11:10:42AM +0300, Nikita Shubin via B4 Relay wrote:
> This series aims to convert ep93xx from platform to full device tree support.
> 
> The main goal is to receive ACK's to take it via Arnd's arm-soc branch.
> 
> Major changes:
> - drop newline at the end from each YAML files
> - rename dma and clk bindings headers to match first compatible
> - shrink SoC exported functions number to only 2
> - dropped some ep93xx_pata fixes from these series
> - dropped m48t86 stuff from these series
> 
> Bit thanks to Andy Shevchenko for thorough review.

You are welcome!

Dunno if you have used --patience when formatted the patches, but I think
you should, if hadn't, for the next version. It will help a lot in reviewing
and understanding the changes.

-- 
With Best Regards,
Andy Shevchenko

Re: (subset) [PATCH v4 00/42] ep93xx device tree conversion

[Alexandre Belloni]

On Fri, 15 Sep 2023 11:10:42 +0300, Nikita Shubin wrote:
> This series aims to convert ep93xx from platform to full device tree support.
> 
> The main goal is to receive ACK's to take it via Arnd's arm-soc branch.
> 
> Major changes:
> - drop newline at the end from each YAML files
> - rename dma and clk bindings headers to match first compatible
> - shrink SoC exported functions number to only 2
> - dropped some ep93xx_pata fixes from these series
> - dropped m48t86 stuff from these series
> 
> [...]

Applied, thanks!

[13/42] dt-bindings: rtc: Add Cirrus EP93xx
        commit: 207bddd97881913bcb8bef84737c0971e712fbee
[14/42] rtc: ep93xx: add DT support for Cirrus EP93xx
        commit: 1d70f9fe5f1c8fbd5d838223b8aec27c69a7e609

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com