From: Hans de Goede <hdegoede@redhat.com>
To: "Filipe Laíns" <lains@riseup.net>,
"Bastien Nocera" <hadess@hadess.net>,
"Jiri Kosina" <jikos@kernel.org>,
"Benjamin Tissoires" <benjamin.tissoires@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org
Subject: [PATCH v2 08/14] HID: logitech-hidpp: Add a hidpp_connect_and_start() helper
Date: Sun, 8 Oct 2023 11:54:51 +0200 [thread overview]
Message-ID: <20231008095458.8926-9-hdegoede@redhat.com> (raw)
In-Reply-To: <20231008095458.8926-1-hdegoede@redhat.com>
Add a helper to take the 3 hid_hw_start() + hid_hw_open() +
hid_device_io_start() steps which are necessary to be able to
talk to the hw.
This is a preparation patch for moving the connect check to after
restarting IO, in case we miss a connect packet coming in while IO
is disabled during the restart.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/hid/hid-logitech-hidpp.c | 40 ++++++++++++++++++++------------
1 file changed, 25 insertions(+), 15 deletions(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index bbb1c6d8ccc9..45b371e7b9ee 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4391,6 +4391,29 @@ static bool hidpp_application_equals(struct hid_device *hdev,
return report && report->application == application;
}
+static int hidpp_connect_and_start(struct hidpp_device *hidpp, unsigned int connect_mask)
+{
+ struct hid_device *hdev = hidpp->hid_dev;
+ int ret;
+
+ ret = hid_hw_start(hdev, connect_mask);
+ if (ret) {
+ hid_err(hdev, "hw start failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "hw open failed: %d\n", ret);
+ hid_hw_stop(hdev);
+ return ret;
+ }
+
+ /* Allow incoming packets */
+ hid_device_io_start(hdev);
+ return 0;
+}
+
static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct hidpp_device *hidpp;
@@ -4462,21 +4485,9 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
* Plain USB connections need to actually call start and open
* on the transport driver to allow incoming data.
*/
- ret = hid_hw_start(hdev, 0);
- if (ret) {
- hid_err(hdev, "hw start failed\n");
+ ret = hidpp_connect_and_start(hidpp, 0);
+ if (ret)
goto hid_hw_start_fail;
- }
-
- ret = hid_hw_open(hdev);
- if (ret < 0) {
- dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n",
- __func__, ret);
- goto hid_hw_open_fail;
- }
-
- /* Allow incoming packets */
- hid_device_io_start(hdev);
/* Get name + serial, store in hdev->name + hdev->uniq */
if (hidpp->quirks & HIDPP_QUIRK_UNIFYING)
@@ -4523,7 +4534,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_hw_init_fail:
hid_hw_close(hdev);
-hid_hw_open_fail:
hid_hw_stop(hdev);
hid_hw_start_fail:
sysfs_remove_group(&hdev->dev.kobj, &ps_attribute_group);
--
2.41.0
next prev parent reply other threads:[~2023-10-08 9:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-08 9:54 [PATCH v2 00/14] HID: logitech-hidpp: Avoid hidpp_connect_event() running while probe() restarts IO Hans de Goede
2023-10-08 9:54 ` [PATCH v2 01/14] HID: logitech-hidpp: Revert "Don't restart communication if not necessary" Hans de Goede
2023-10-08 9:54 ` [PATCH v2 02/14] HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check Hans de Goede
2023-10-08 9:54 ` [PATCH v2 03/14] HID: logitech-hidpp: Add hidpp_non_unifying_init() helper Hans de Goede
2023-10-08 9:54 ` [PATCH v2 04/14] HID: logitech-hidpp: Remove connected check for non-unifying devices Hans de Goede
2023-10-08 9:54 ` [PATCH v2 05/14] HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event() Hans de Goede
2023-10-08 9:54 ` [PATCH v2 06/14] HID: logitech-hidpp: Remove wtp_get_config() call from probe() Hans de Goede
2023-10-08 9:54 ` [PATCH v2 07/14] HID: logitech-hidpp: Remove connected check for g920_get_config() call Hans de Goede
2023-10-08 9:54 ` Hans de Goede [this message]
2023-10-08 9:54 ` [PATCH v2 09/14] HID: logitech-hidpp: Move the connected check to after restarting IO Hans de Goede
2023-10-08 9:54 ` [PATCH v2 10/14] HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init() Hans de Goede
2023-10-08 9:54 ` [PATCH v2 11/14] HID: logitech-hidpp: Remove unused connected param from *_connect() Hans de Goede
2023-10-08 9:54 ` [PATCH v2 12/14] HID: logitech-hidpp: Fix connect event race Hans de Goede
2023-10-08 9:54 ` [PATCH v2 13/14] HID: logitech-hidpp: Avoid hidpp_connect_event() running while probe() restarts IO Hans de Goede
2023-10-08 9:54 ` [PATCH v2 14/14] HID: logitech-hidpp: Drop delayed_work_cb() Hans de Goede
2023-10-08 10:30 ` [PATCH v2 00/14] HID: logitech-hidpp: Avoid hidpp_connect_event() running while probe() restarts IO Hans de Goede
2023-10-09 8:13 ` Benjamin Tissoires
2023-10-09 15:00 ` Hans de Goede
2023-10-10 9:36 ` Benjamin Tissoires
2023-10-10 9:40 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231008095458.8926-9-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=benjamin.tissoires@redhat.com \
--cc=hadess@hadess.net \
--cc=jikos@kernel.org \
--cc=lains@riseup.net \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).