[PATCH v3 04/12] HID: logitech-hidpp: Remove wtp_get_config() call from probe()

[Hans de Goede <hdegoede@redhat.com>]

For WTP devices which start disconnected (paired with the unifying
receiver, but not connected atm) hidpp_connect_event() takes care
of calling wtp_get_config() when the device later connects.

There is no need to have a separate code path for WTP devices which
are connected at probe() time, these can use the same code-path since
probe() will queue hidpp_connect_event() for those at probe time.

Drop the unnecessary wtp_get_config() call from probe().

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/hid/hid-logitech-hidpp.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 7bf12ca0eb4a..707fb9616fc5 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4499,11 +4499,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		hidpp_overwrite_name(hdev);
 	}
 
-	if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
-		ret = wtp_get_config(hidpp);
-		if (ret)
-			goto hid_hw_init_fail;
-	} else if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
+	if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
 		ret = g920_get_config(hidpp, &data);
 		if (ret)
 			goto hid_hw_init_fail;
-- 
2.41.0