From: Hans de Goede <hdegoede@redhat.com>
To: "Filipe Laíns" <lains@riseup.net>,
"Bastien Nocera" <hadess@hadess.net>,
"Jiri Kosina" <jikos@kernel.org>,
"Benjamin Tissoires" <benjamin.tissoires@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org
Subject: [PATCH v3 06/12] HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check
Date: Tue, 10 Oct 2023 12:20:23 +0200 [thread overview]
Message-ID: <20231010102029.111003-7-hdegoede@redhat.com> (raw)
In-Reply-To: <20231010102029.111003-1-hdegoede@redhat.com>
Move the hidpp_overwrite_name() call to before the connect check, this
puts it at the same place in the probe() order as hidpp_serial_init()
which seems more logical. This should not make a difference since this
is in the non-unifying path and only unifying devices can be probed
in non-connected state.
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
Doing this before the connect check requires dropping the protocol
version check since protocol_major is not set yet now. Instead
this relies on hidpp_root_get_feature(HIDPP_PAGE_GET_DEVICE_NAME_TYPE)
failing on older devices, just like how hidpp_get_serial() relies on
hidpp_root_get_feature(HIDPP_PAGE_DEVICE_INFORMATION) failing on older
devices. So this again makes the code more consistent.
Also stop printing an error on failure now, since with the proto
version check gone failures are expected to happen on older devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Note: The weird unbalanced curly braces in the "else { ... }" go away
in the next patch in the series.
---
drivers/hid/hid-logitech-hidpp.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index dd67749301a8..799d1a429d81 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4135,19 +4135,12 @@ static void hidpp_overwrite_name(struct hid_device *hdev)
struct hidpp_device *hidpp = hid_get_drvdata(hdev);
char *name;
- if (hidpp->protocol_major < 2)
- return;
-
name = hidpp_get_device_name(hidpp);
-
- if (!name) {
- hid_err(hdev, "unable to retrieve the name of the device");
- } else {
+ if (name) {
dbg_hid("HID++: Got name: %s\n", name);
snprintf(hdev->name, sizeof(hdev->name), "%s", name);
+ kfree(name);
}
-
- kfree(name);
}
static int hidpp_input_open(struct input_dev *dev)
@@ -4483,8 +4476,12 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (hidpp->quirks & HIDPP_QUIRK_UNIFYING)
hidpp_unifying_init(hidpp);
- else if (hid_is_usb(hidpp->hid_dev))
- hidpp_serial_init(hidpp);
+ else {
+ if (hid_is_usb(hidpp->hid_dev))
+ hidpp_serial_init(hidpp);
+
+ hidpp_overwrite_name(hdev);
+ }
connected = hidpp_root_get_protocol_version(hidpp) == 0;
atomic_set(&hidpp->connected, connected);
@@ -4494,8 +4491,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_err(hdev, "Device not connected");
goto hid_hw_init_fail;
}
-
- hidpp_overwrite_name(hdev);
}
schedule_work(&hidpp->work);
--
2.41.0
next prev parent reply other threads:[~2023-10-10 10:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-10 10:20 [PATCH v3 00/12] HID: logitech-hidpp: Avoid hidpp_connect_event() running while probe() restarts IO Hans de Goede
2023-10-10 10:20 ` [PATCH v3 01/12] HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only Hans de Goede
2023-10-18 15:17 ` Benjamin Tissoires
2023-10-25 16:43 ` Benjamin Tissoires
2023-10-25 19:02 ` Hans de Goede
2023-10-10 10:20 ` [PATCH v3 02/12] HID: logitech-hidpp: Revert "Don't restart communication if not necessary" Hans de Goede
2023-10-10 10:20 ` [PATCH v3 03/12] HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event() Hans de Goede
2023-10-10 10:20 ` [PATCH v3 04/12] HID: logitech-hidpp: Remove wtp_get_config() call from probe() Hans de Goede
2023-10-10 10:20 ` [PATCH v3 05/12] HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init() Hans de Goede
2023-10-10 10:20 ` Hans de Goede [this message]
2023-10-10 10:20 ` [PATCH v3 07/12] HID: logitech-hidpp: Add hidpp_non_unifying_init() helper Hans de Goede
2023-10-10 10:20 ` [PATCH v3 08/12] HID: logitech-hidpp: Remove connected check for non-unifying devices Hans de Goede
2023-10-10 10:20 ` [PATCH v3 09/12] HID: logitech-hidpp: Remove unused connected param from *_connect() Hans de Goede
2023-10-10 10:20 ` [PATCH v3 10/12] HID: logitech-hidpp: Fix connect event race Hans de Goede
2023-10-10 10:20 ` [PATCH v3 11/12] HID: logitech-hidpp: Drop delayed_work_cb() Hans de Goede
2023-10-10 10:20 ` [PATCH v3 12/12] HID: logitech-hidpp: Drop HIDPP_QUIRK_UNIFYING Hans de Goede
2023-10-25 19:03 ` [PATCH v3 00/12] HID: logitech-hidpp: Avoid hidpp_connect_event() running while probe() restarts IO Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231010102029.111003-7-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=benjamin.tissoires@redhat.com \
--cc=hadess@hadess.net \
--cc=jikos@kernel.org \
--cc=lains@riseup.net \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).