[PATCH AUTOSEL 5.10 01/11] Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table

[PATCH AUTOSEL 5.10 01/11] Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table

[Sasha Levin]

From: Szilard Fabian <szfabian@bluemarch.art>

[ Upstream commit 80f39e1c27ba9e5a1ea7e68e21c569c9d8e46062 ]

In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:308A) not working at all.

Since the integrated touchpad is managed by the i2c_designware input
driver in the Linux kernel and you can't find a PS/2 mouse port on the
computer I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 1bd5898abb97d..09528c0a8a34e 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -609,6 +609,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
 	},
+	{
+		/* Fujitsu Lifebook E5411 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E5411"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		/* Gigabyte M912 */
 		.matches = {
-- 
2.40.1

[PATCH AUTOSEL 5.10 02/11] Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 423622a90abb243944d1517b9f57db53729e45c4 ]

Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().

It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.

This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.

This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.

But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:

[    9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[    9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[    9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[    9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[    9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[    9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5

Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).

Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.

Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.

Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/goodix.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 098115eb80841..53792a1b6ac39 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -820,6 +820,25 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n");
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_last_gpios;
+	} else if (ts->gpio_count == 1 && ts->gpio_int_idx == 0) {
+		/*
+		 * On newer devices there is only 1 GpioInt resource and _PS0
+		 * does the whole reset sequence for us.
+		 */
+		acpi_device_fix_up_power(ACPI_COMPANION(dev));
+
+		/*
+		 * Before the _PS0 call the int GPIO may have been in output
+		 * mode and the call should have put the int GPIO in input mode,
+		 * but the GPIO subsys cached state may still think it is
+		 * in output mode, causing gpiochip_lock_as_irq() failure.
+		 *
+		 * Add a mapping for the int GPIO to make the
+		 * gpiod_int = gpiod_get(..., GPIOD_IN) call succeed,
+		 * which will explicitly set the direction to input.
+		 */
+		ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+		gpio_mapping = acpi_goodix_int_first_gpios;
 	} else {
 		dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n",
 			 ts->gpio_count, ts->gpio_int_idx);
-- 
2.40.1

[PATCH AUTOSEL 5.10 09/11] Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]

Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.

SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.

Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.

Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c |  1 +
 drivers/input/rmi4/rmi_smbus.c  | 50 ++++++++++++++++++---------------
 2 files changed, 29 insertions(+), 22 deletions(-)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 82577095e175e..34b24faed2ece 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1748,6 +1748,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 		psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
 		!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10);
 	const struct rmi_device_platform_data pdata = {
+		.reset_delay_ms = 30,
 		.sensor_pdata = {
 			.sensor_type = rmi_sensor_touchpad,
 			.axis_align.flip_y = true,
diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
index 2407ea43de59b..f38bf9a5f599d 100644
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -235,12 +235,29 @@ static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb)
 
 static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb)
 {
-	int retval;
+	struct i2c_client *client = rmi_smb->client;
+	int smbus_version;
+
+	/*
+	 * psmouse driver resets the controller, we only need to wait
+	 * to give the firmware chance to fully reinitialize.
+	 */
+	if (rmi_smb->xport.pdata.reset_delay_ms)
+		msleep(rmi_smb->xport.pdata.reset_delay_ms);
 
 	/* we need to get the smbus version to activate the touchpad */
-	retval = rmi_smb_get_version(rmi_smb);
-	if (retval < 0)
-		return retval;
+	smbus_version = rmi_smb_get_version(rmi_smb);
+	if (smbus_version < 0)
+		return smbus_version;
+
+	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
+		smbus_version);
+
+	if (smbus_version != 2 && smbus_version != 3) {
+		dev_err(&client->dev, "Unrecognized SMB version %d\n",
+				smbus_version);
+		return -ENODEV;
+	}
 
 	return 0;
 }
@@ -253,11 +270,10 @@ static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr)
 	rmi_smb_clear_state(rmi_smb);
 
 	/*
-	 * we do not call the actual reset command, it has to be handled in
-	 * PS/2 or there will be races between PS/2 and SMBus.
-	 * PS/2 should ensure that a psmouse_reset is called before
-	 * intializing the device and after it has been removed to be in a known
-	 * state.
+	 * We do not call the actual reset command, it has to be handled in
+	 * PS/2 or there will be races between PS/2 and SMBus. PS/2 should
+	 * ensure that a psmouse_reset is called before initializing the
+	 * device and after it has been removed to be in a known state.
 	 */
 	return rmi_smb_enable_smbus_mode(rmi_smb);
 }
@@ -273,7 +289,6 @@ static int rmi_smb_probe(struct i2c_client *client,
 {
 	struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct rmi_smb_xport *rmi_smb;
-	int smbus_version;
 	int error;
 
 	if (!pdata) {
@@ -312,18 +327,9 @@ static int rmi_smb_probe(struct i2c_client *client,
 	rmi_smb->xport.proto_name = "smb";
 	rmi_smb->xport.ops = &rmi_smb_ops;
 
-	smbus_version = rmi_smb_get_version(rmi_smb);
-	if (smbus_version < 0)
-		return smbus_version;
-
-	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
-		smbus_version);
-
-	if (smbus_version != 2 && smbus_version != 3) {
-		dev_err(&client->dev, "Unrecognized SMB version %d\n",
-				smbus_version);
-		return -ENODEV;
-	}
+	error = rmi_smb_enable_smbus_mode(rmi_smb);
+	if (error)
+		return error;
 
 	i2c_set_clientdata(client, rmi_smb);
 
-- 
2.40.1

[PATCH AUTOSEL 5.10 10/11] Input: xpad - add PXN V900 support

[Sasha Levin]

From: Matthias Berndt <matthias_berndt@gmx.de>

[ Upstream commit a65cd7ef5a864bdbbe037267c327786b7759d4c6 ]

Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index b99318fb58dc6..762c502391464 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -252,6 +252,7 @@ static const struct xpad_device {
 	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
+	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
 	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
@@ -446,6 +447,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x0f0d),		/* Hori Controllers */
 	XPAD_XBOX360_VENDOR(0x1038),		/* SteelSeries Controllers */
 	XPAD_XBOX360_VENDOR(0x11c9),		/* Nacon GC100XF */
+	XPAD_XBOX360_VENDOR(0x11ff),		/* PXN V900 */
 	XPAD_XBOX360_VENDOR(0x1209),		/* Ardwiino Controllers */
 	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
-- 
2.40.1

[PATCH AUTOSEL 5.10 11/11] Input: powermate - fix use-after-free in powermate_config_complete

[Sasha Levin]

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

[ Upstream commit 5c15c60e7be615f05a45cd905093a54b11f461bc ]

syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct.  When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.

Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.

[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/misc/powermate.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index c4e0e1886061f..6b1b95d58e6b5 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -425,6 +425,7 @@ static void powermate_disconnect(struct usb_interface *intf)
 		pm->requires_update = 0;
 		usb_kill_urb(pm->irq);
 		input_unregister_device(pm->input);
+		usb_kill_urb(pm->config);
 		usb_free_urb(pm->irq);
 		usb_free_urb(pm->config);
 		powermate_free_buffers(interface_to_usbdev(intf), pm);
-- 
2.40.1