From: Benjamin Tissoires <bentiss@kernel.org>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Shuah Khan <shuah@kernel.org>,
Peter Hutterer <peter.hutterer@who-t.net>
Cc: linux-input@vger.kernel.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org,
Benjamin Tissoires <bentiss@kernel.org>
Subject: [PATCH v2 10/15] selftests/hid: tablets: add variants of states with buttons
Date: Wed, 06 Dec 2023 11:46:01 +0100 [thread overview]
Message-ID: <20231206-wip-selftests-v2-10-c0350c2f5986@kernel.org> (raw)
In-Reply-To: <20231206-wip-selftests-v2-0-c0350c2f5986@kernel.org>
Turns out that there are transitions that are unlikely to happen:
for example, having both the tip switch and a button being changed
at the same time (in the same report) would require either a very talented
and precise user or a very bad hardware with a very low sampling rate.
So instead of manually building the button test by hand and forgetting
about some cases, let's reuse the state machine and transitions we have.
This patch only adds the states and the valid transitions. The actual
tests will be replaced later.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
changes in v2:
- adapt to use dedicated Enum BtnPressed
---
tools/testing/selftests/hid/tests/test_tablet.py | 173 +++++++++++++++++++++--
1 file changed, 160 insertions(+), 13 deletions(-)
diff --git a/tools/testing/selftests/hid/tests/test_tablet.py b/tools/testing/selftests/hid/tests/test_tablet.py
index cec65294c9ec..a77534f23c75 100644
--- a/tools/testing/selftests/hid/tests/test_tablet.py
+++ b/tools/testing/selftests/hid/tests/test_tablet.py
@@ -30,25 +30,72 @@ class ToolType(Enum):
RUBBER = libevdev.EV_KEY.BTN_TOOL_RUBBER
+class BtnPressed(Enum):
+ """Represents whether a button is pressed on the stylus"""
+
+ PRIMARY_PRESSED = libevdev.EV_KEY.BTN_STYLUS
+ SECONDARY_PRESSED = libevdev.EV_KEY.BTN_STYLUS2
+
+
class PenState(Enum):
"""Pen states according to Microsoft reference:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
- """
- PEN_IS_OUT_OF_RANGE = BtnTouch.UP, None
- PEN_IS_IN_RANGE = BtnTouch.UP, ToolType.PEN
- PEN_IS_IN_CONTACT = BtnTouch.DOWN, ToolType.PEN
- PEN_IS_IN_RANGE_WITH_ERASING_INTENT = BtnTouch.UP, ToolType.RUBBER
- PEN_IS_ERASING = BtnTouch.DOWN, ToolType.RUBBER
+ We extend it with the various buttons when we need to check them.
+ """
- def __init__(self, touch: BtnTouch, tool: Optional[ToolType]):
+ PEN_IS_OUT_OF_RANGE = BtnTouch.UP, None, None
+ PEN_IS_IN_RANGE = BtnTouch.UP, ToolType.PEN, None
+ PEN_IS_IN_RANGE_WITH_BUTTON = BtnTouch.UP, ToolType.PEN, BtnPressed.PRIMARY_PRESSED
+ PEN_IS_IN_RANGE_WITH_SECOND_BUTTON = (
+ BtnTouch.UP,
+ ToolType.PEN,
+ BtnPressed.SECONDARY_PRESSED,
+ )
+ PEN_IS_IN_CONTACT = BtnTouch.DOWN, ToolType.PEN, None
+ PEN_IS_IN_CONTACT_WITH_BUTTON = (
+ BtnTouch.DOWN,
+ ToolType.PEN,
+ BtnPressed.PRIMARY_PRESSED,
+ )
+ PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON = (
+ BtnTouch.DOWN,
+ ToolType.PEN,
+ BtnPressed.SECONDARY_PRESSED,
+ )
+ PEN_IS_IN_RANGE_WITH_ERASING_INTENT = BtnTouch.UP, ToolType.RUBBER, None
+ PEN_IS_IN_RANGE_WITH_ERASING_INTENT_WITH_BUTTON = (
+ BtnTouch.UP,
+ ToolType.RUBBER,
+ BtnPressed.PRIMARY_PRESSED,
+ )
+ PEN_IS_IN_RANGE_WITH_ERASING_INTENT_WITH_SECOND_BUTTON = (
+ BtnTouch.UP,
+ ToolType.RUBBER,
+ BtnPressed.SECONDARY_PRESSED,
+ )
+ PEN_IS_ERASING = BtnTouch.DOWN, ToolType.RUBBER, None
+ PEN_IS_ERASING_WITH_BUTTON = (
+ BtnTouch.DOWN,
+ ToolType.RUBBER,
+ BtnPressed.PRIMARY_PRESSED,
+ )
+ PEN_IS_ERASING_WITH_SECOND_BUTTON = (
+ BtnTouch.DOWN,
+ ToolType.RUBBER,
+ BtnPressed.SECONDARY_PRESSED,
+ )
+
+ def __init__(self, touch: BtnTouch, tool: Optional[ToolType], button: Optional[BtnPressed]):
self.touch = touch
self.tool = tool
+ self.button = button
@classmethod
def from_evdev(cls, evdev) -> "PenState":
touch = BtnTouch(evdev.value[libevdev.EV_KEY.BTN_TOUCH])
tool = None
+ button = None
if (
evdev.value[libevdev.EV_KEY.BTN_TOOL_RUBBER]
and not evdev.value[libevdev.EV_KEY.BTN_TOOL_PEN]
@@ -65,7 +112,17 @@ class PenState(Enum):
):
raise ValueError("2 tools are not allowed")
- return cls((touch, tool))
+ # we take only the highest button in account
+ for b in [libevdev.EV_KEY.BTN_STYLUS, libevdev.EV_KEY.BTN_STYLUS2]:
+ if bool(evdev.value[b]):
+ button = b
+
+ # the kernel tends to insert an EV_SYN once removing the tool, so
+ # the button will be released after
+ if tool is None:
+ button = None
+
+ return cls((touch, tool, button))
def apply(self, events) -> "PenState":
if libevdev.EV_SYN.SYN_REPORT in events:
@@ -74,6 +131,8 @@ class PenState(Enum):
touch_found = False
tool = self.tool
tool_found = False
+ button = self.button
+ button_found = False
for ev in events:
if ev == libevdev.InputEvent(libevdev.EV_KEY.BTN_TOUCH):
@@ -88,12 +147,22 @@ class PenState(Enum):
if tool_found:
raise ValueError(f"duplicated BTN_TOOL_* in {events}")
tool_found = True
- if ev.value:
- tool = ToolType(ev.code)
- else:
- tool = None
+ tool = ToolType(ev.code) if ev.value else None
+ elif ev in (
+ libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS),
+ libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS2),
+ ):
+ if button_found:
+ raise ValueError(f"duplicated BTN_STYLUS* in {events}")
+ button_found = True
+ button = ev.code if ev.value else None
- new_state = PenState((touch, tool))
+ # the kernel tends to insert an EV_SYN once removing the tool, so
+ # the button will be released after
+ if tool is None:
+ button = None
+
+ new_state = PenState((touch, tool, button))
assert (
new_state in self.valid_transitions()
), f"moving from {self} to {new_state} is forbidden"
@@ -109,14 +178,20 @@ class PenState(Enum):
return (
PenState.PEN_IS_OUT_OF_RANGE,
PenState.PEN_IS_IN_RANGE,
+ PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+ PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT,
PenState.PEN_IS_IN_CONTACT,
+ PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+ PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
PenState.PEN_IS_ERASING,
)
if self == PenState.PEN_IS_IN_RANGE:
return (
PenState.PEN_IS_IN_RANGE,
+ PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+ PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
PenState.PEN_IS_OUT_OF_RANGE,
PenState.PEN_IS_IN_CONTACT,
)
@@ -124,6 +199,8 @@ class PenState(Enum):
if self == PenState.PEN_IS_IN_CONTACT:
return (
PenState.PEN_IS_IN_CONTACT,
+ PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+ PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
PenState.PEN_IS_IN_RANGE,
PenState.PEN_IS_OUT_OF_RANGE,
)
@@ -142,6 +219,38 @@ class PenState(Enum):
PenState.PEN_IS_OUT_OF_RANGE,
)
+ if self == PenState.PEN_IS_IN_RANGE_WITH_BUTTON:
+ return (
+ PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+ PenState.PEN_IS_IN_RANGE,
+ PenState.PEN_IS_OUT_OF_RANGE,
+ PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+ )
+
+ if self == PenState.PEN_IS_IN_CONTACT_WITH_BUTTON:
+ return (
+ PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+ PenState.PEN_IS_IN_CONTACT,
+ PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+ PenState.PEN_IS_OUT_OF_RANGE,
+ )
+
+ if self == PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON:
+ return (
+ PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+ PenState.PEN_IS_IN_RANGE,
+ PenState.PEN_IS_OUT_OF_RANGE,
+ PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+ )
+
+ if self == PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON:
+ return (
+ PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+ PenState.PEN_IS_IN_CONTACT,
+ PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+ PenState.PEN_IS_OUT_OF_RANGE,
+ )
+
return tuple()
@staticmethod
@@ -376,26 +485,64 @@ class PenDigitizer(base.UHIDTestDevice):
pen.xtilt = 0
pen.ytilt = 0
pen.twist = 0
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = False
elif state == PenState.PEN_IS_IN_RANGE:
pen.tipswitch = False
pen.inrange = True
pen.invert = False
pen.eraser = False
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = False
elif state == PenState.PEN_IS_IN_CONTACT:
pen.tipswitch = True
pen.inrange = True
pen.invert = False
pen.eraser = False
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = False
+ elif state == PenState.PEN_IS_IN_RANGE_WITH_BUTTON:
+ pen.tipswitch = False
+ pen.inrange = True
+ pen.invert = False
+ pen.eraser = False
+ pen.barrelswitch = True
+ pen.secondarybarrelswitch = False
+ elif state == PenState.PEN_IS_IN_CONTACT_WITH_BUTTON:
+ pen.tipswitch = True
+ pen.inrange = True
+ pen.invert = False
+ pen.eraser = False
+ pen.barrelswitch = True
+ pen.secondarybarrelswitch = False
+ elif state == PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON:
+ pen.tipswitch = False
+ pen.inrange = True
+ pen.invert = False
+ pen.eraser = False
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = True
+ elif state == PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON:
+ pen.tipswitch = True
+ pen.inrange = True
+ pen.invert = False
+ pen.eraser = False
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = True
elif state == PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT:
pen.tipswitch = False
pen.inrange = True
pen.invert = True
pen.eraser = False
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = False
elif state == PenState.PEN_IS_ERASING:
pen.tipswitch = False
pen.inrange = True
pen.invert = False
pen.eraser = True
+ pen.barrelswitch = False
+ pen.secondarybarrelswitch = False
pen.current_state = state
--
2.41.0
next prev parent reply other threads:[~2023-12-06 10:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-06 10:45 [PATCH v2 00/15] selftests/hid: tablets fixes Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 01/15] selftests/hid: vmtest.sh: update vm2c and container Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 02/15] selftests/hid: vmtest.sh: allow finer control on the build steps Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 03/15] selftests/hid: base: allow for multiple skip_if_uhdev Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 04/15] selftests/hid: tablets: remove unused class Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 05/15] selftests/hid: tablets: move the transitions to PenState Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 06/15] selftests/hid: tablets: move move_to function to PenDigitizer Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 07/15] selftests/hid: tablets: do not set invert when the eraser is used Benjamin Tissoires
2023-12-06 10:45 ` [PATCH v2 08/15] selftests/hid: tablets: set initial data for tilt/twist Benjamin Tissoires
2023-12-06 10:46 ` [PATCH v2 09/15] selftests/hid: tablets: define the elements of PenState Benjamin Tissoires
2023-12-06 10:46 ` Benjamin Tissoires [this message]
2023-12-06 10:46 ` [PATCH v2 11/15] selftests/hid: tablets: convert the primary button tests Benjamin Tissoires
2023-12-06 10:46 ` [PATCH v2 12/15] selftests/hid: tablets: add a secondary barrel switch test Benjamin Tissoires
2023-12-06 10:46 ` [PATCH v2 13/15] selftests/hid: tablets: be stricter for some transitions Benjamin Tissoires
2023-12-06 10:46 ` [PATCH v2 14/15] selftests/hid: fix mypy complains Benjamin Tissoires
2023-12-06 10:46 ` [PATCH v2 15/15] selftests/hid: fix ruff linter complains Benjamin Tissoires
2023-12-06 23:32 ` [PATCH v2 00/15] selftests/hid: tablets fixes Jiri Kosina
2023-12-07 8:53 ` Benjamin Tissoires
2023-12-07 8:56 ` Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231206-wip-selftests-v2-10-c0350c2f5986@kernel.org \
--to=bentiss@kernel.org \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=peter.hutterer@who-t.net \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).