* [PATCH v2 2/2] Input: Add Himax HX83102J touchscreen driver
[not found] <20231206103546.808680-1-allencl_lin@hotmail.com>
2023-12-06 10:35 ` [PATCH v2 1/2] dt-bindings: input: Add Himax HX83102J touchscreen Allen_Lin
@ 2023-12-06 10:35 ` Allen_Lin
2023-12-06 11:01 ` Krzysztof Kozlowski
2023-12-07 0:27 ` kernel test robot
1 sibling, 2 replies; 5+ messages in thread
From: Allen_Lin @ 2023-12-06 10:35 UTC (permalink / raw)
To: dmitry.torokhov, robh+dt, krzysztof.kozlowski+dt, conor+dt, jikos,
benjamin.tissoires, linux-input, devicetree, linux-kernel
Cc: Allen_Lin
Add a new driver for Himax touchscreen series touchscreen controllers.
This driver supports Himax IC using the SPI interface to
acquire HID packets.
Signed-off-by: Allen_Lin <allencl_lin@hotmail.com>
---
v1 -> v2: Fix kernel test robot build warnings
Signed-off-by: Allen_Lin <allencl_lin@hotmail.com>
---
MAINTAINERS | 2 +
drivers/hid/Kconfig | 9 +-
drivers/hid/Makefile | 2 +-
drivers/hid/hid-himax-83102j.c | 3175 ++++++++++++++++++++++++++++++++
drivers/hid/hid-himax-83102j.h | 923 ++++++++++
5 files changed, 4109 insertions(+), 2 deletions(-)
create mode 100644 drivers/hid/hid-himax-83102j.c
create mode 100644 drivers/hid/hid-himax-83102j.h
diff --git a/MAINTAINERS b/MAINTAINERS
index cadcbf7294a6..d0d5ab7ea1e6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9507,6 +9507,8 @@ M: Allen Lin <allencl_lin@hotmail.com>
L: linux-input@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
+F: drivers/hid/hid-himax-83102j.c
+F: drivers/hid/hid-himax-83102j.h
HIMAX HX83112B TOUCHSCREEN SUPPORT
M: Job Noorman <job@noorman.info>
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 4ce74af79657..896af236c1f8 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1324,7 +1324,14 @@ config HID_KUNIT_TEST
Documentation/dev-tools/kunit/.
If in doubt, say "N".
-
+config HID_HIMAX
+ tristate "Himax touchpanel CHIPSET"
+ depends on HID
+ help
+ Say Y here if you have a Himax CHIPSET touchscreen.
+ HIMAX controllers are multi touch controllers which can
+ report 10 touches at a time.
+ If unsure, say N.
endmenu
source "drivers/hid/bpf/Kconfig"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 8a06d0f840bc..a0f0fc3261e0 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -156,7 +156,7 @@ hid-uclogic-test-objs := hid-uclogic-rdesc.o \
hid-uclogic-params.o \
hid-uclogic-rdesc-test.o
obj-$(CONFIG_HID_KUNIT_TEST) += hid-uclogic-test.o
-
+obj-$(CONFIG_HID_HIMAX) += hid-himax-83102j.o
obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
obj-$(CONFIG_USB_KBD) += usbhid/
diff --git a/drivers/hid/hid-himax-83102j.c b/drivers/hid/hid-himax-83102j.c
new file mode 100644
index 000000000000..bc7dc0675ec0
--- /dev/null
+++ b/drivers/hid/hid-himax-83102j.c
@@ -0,0 +1,3175 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Himax Driver Code for HX83102J to simulate HID
+ *
+ * Copyright (C) 2023 Himax Corporation.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "hid-himax-83102j.h"
+
+struct himax_ts_data *g_himax_ts;
+struct himax_core_fp g_core_fp;
+
+#define FW_EXT_NAME(FWNAME) FWNAME ".bin"
+char *g_fw_boot_upgrade_name = FW_EXT_NAME(BOOT_UPGRADE_FWNAME);
+struct himax_core_command_regs g_core_regs;
+
+
+union host_ext_rd_t g_host_ext_rd = {
+ .host_report_descriptor = {
+ 0x06, 0x00, 0xFF,// Usage Page (Vendor-defined)
+ 0x09, 0x01,// Usage (0x1)
+ 0xA1, 0x01,// Collection (Application)
+ 0x75, 0x08,// Report Size (8)
+ 0x15, 0x00,// Logical Minimum (0)
+ 0x26, 0xFF, 0x00,// Logical Maximum (255)
+ 0x85, 0x05,// Report ID (5)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0xFF, 0x00,// Report Count (255)
+ 0xB1, 0x02,// Feature (ID: 5, sz: 2040 bits(255 bytes))
+ 0x85, 0x06,// Report ID (6)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, (HID_REG_SZ_MAX & 0xFF), (HID_REG_SZ_MAX >> 8),
+ 0xB1, 0x02,// Feature (ID: 6, sz: 72 bits(9 bytes))
+ 0x85, 0x07,// Report ID (7)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x04, 0x00,// Report Count (4)
+ 0xB1, 0x02,// Feature (ID: 7, sz: 32 bits(4 bytes))
+ 0x85, 0x08,// Report ID (8)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x8D, 0x13,// Report Count (5005)
+ 0xB1, 0x02,// Feature (ID: 8, sz: 40040 bits(5005 bytes))
+ // 0x85, 0x09,// Report ID (9)
+ // 0x09, 0x02,// Usage (0x2)
+ // 0x96, 0x4F, 0x03,// Report Count (847)
+ // 0xB1, 0x02,// Feature (ID: 9, sz: 6776 bits(847 bytes))
+ 0x85, 0x0A,// Report ID (10)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x00, 0x04,// Report Count (1024)
+ 0x91, 0x02,// Output (ID: 10, sz: 8192 bits(1024 bytes))
+ 0x85, 0x0B,// Report ID (11)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x01, 0x00,// Report Count (1)
+ 0xB1, 0x02,// Feature (ID: 11, sz: 8 bits(1 bytes))
+ 0x85, 0x0C,// Report ID (12)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x01, 0x00,// Report Count (1)
+ 0xB1, 0x02,// Feature (ID: 12, sz: 8 bits(1 bytes))
+ 0x85, 0x31,// Report ID (49)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x01, 0x00,// Report Count (1)
+ 0xB1, 0x02,// Feature (ID: 49, sz: 8 bits(1 bytes))
+ 0xC0,// End Collection
+ },
+};
+
+const unsigned int host_ext_report_desc_sz =
+ sizeof(g_host_ext_rd.host_report_descriptor);
+
+union heatmap_rd_t g_heatmap_rd = {
+ .host_report_descriptor = {
+ 0x05, 0x0D,// Usage Page (Digitizers)
+ 0x09, 0x0F,// Usage (0xF)
+ 0xA1, 0x01,// Collection (Application)
+ 0x85, 0x61,// Report ID (97)
+ 0x05, 0x0D,// Usage Page (Digitizers)
+ 0x15, 0x00,// Logical Minimum (0)
+ 0x27, 0xFF, 0xFF, 0x00, 0x00,// Logical Maximum (65535)
+ 0x75, 0x10,// Report Size (16)
+ 0x95, 0x01,// Report Count (1)
+ 0x09, 0x6A,// Usage (0x6A)
+ 0x81, 0x02,// Input (ID: 97, sz: 16 bits(2 bytes))
+ 0x09, 0x6B,// Usage (0x6B)
+ 0x81, 0x02,// Input (ID: 97, sz: 16 bits(2 bytes))
+ 0x27, 0xFF, 0xFF, 0xFF, 0xFF,// Logical Maximum (-1)
+ 0x75, 0x20,// Report Size (32)
+ 0x09, 0x56,// Usage (0x56)
+ 0x81, 0x02,// Input (ID: 97, sz: 32 bits(4 bytes))
+ 0x05, 0x01,// Usage Page (Generic Desktop)
+ 0x09, 0x3B,// Usage (0x3B)
+ 0x81, 0x02,// Input (ID: 97, sz: 32 bits(4 bytes))
+ 0x05, 0x0D,// Usage Page (Digitizers)
+ 0x26, 0xFF, 0x00,// Logical Maximum (255)
+ 0x09, 0x6C,// Usage (0x6C)
+ 0x75, 0x08,// Report Size (8)
+ 0x96, 0x00, 0x0C,// Report Count (3072)
+ 0x81, 0x02,// Input (ID: 97, sz: 24576 bits(3072 bytes))
+ 0xC0,// End Collection
+ },
+};
+
+const unsigned int host_heatmap_report_desc_sz =
+ sizeof(g_heatmap_rd.host_report_descriptor);
+
+void himax_rst_gpio_set(int pinnum, u8 value)
+{
+ gpio_direction_output(pinnum, value);
+}
+
+static int himax_gpio_power_config(struct himax_ts_data *ts,
+ struct himax_platform_data *pdata)
+{
+ int error = 0;
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ error = gpio_request(pdata->gpio_reset, "himax-reset");
+
+ if (error < 0) {
+ E("request reset pin failed");
+ goto err_gpio_reset_req;
+ }
+
+ error = gpio_direction_output(pdata->gpio_reset, 0);
+
+ if (error) {
+ E("unable to set direction for gpio [%d]",
+ pdata->gpio_reset);
+ goto err_gpio_reset_dir;
+ }
+ }
+
+ if (pdata->vccd_supply) {
+ error = regulator_enable(pdata->vccd_supply);
+ if (error) {
+ E("unable to enable vccd supply");
+ goto err_vccd_supply_enable;
+ }
+ }
+
+ if (pdata->vcca_supply) {
+ error = regulator_enable(pdata->vcca_supply);
+ if (error) {
+ E("unable to enable vcca supply");
+ goto err_vcca_supply_enable;
+ }
+ }
+
+ if (gpio_is_valid(pdata->gpio_irq)) {
+ /* configure touchscreen irq gpio */
+ error = gpio_request(pdata->gpio_irq, "himax_gpio_irq");
+
+ if (error) {
+ E("unable to request gpio [%d]", pdata->gpio_irq);
+ goto err_gpio_irq_req;
+ }
+
+ error = gpio_direction_input(pdata->gpio_irq);
+ if (error) {
+ E("unable to set direction for gpio [%d]",
+ pdata->gpio_irq);
+ goto err_gpio_irq_set_input;
+ }
+
+ ts->hx_irq = gpio_to_irq(pdata->gpio_irq);
+ } else if (pdata->of_irq) {
+ ts->hx_irq = pdata->of_irq;
+ } else {
+ E("irq not provided");
+ goto err_gpio_irq_req;
+ }
+
+ usleep_range(2000, 2001);
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ error = gpio_direction_output(pdata->gpio_reset, 1);
+
+ if (error) {
+ E("unable to set direction for gpio [%d]",
+ pdata->gpio_reset);
+ goto err_gpio_reset_set_high;
+ }
+ }
+
+ return error;
+
+err_gpio_reset_set_high:
+err_gpio_irq_set_input:
+ if (gpio_is_valid(pdata->gpio_irq))
+ gpio_free(pdata->gpio_irq);
+err_gpio_irq_req:
+ if (pdata->vcca_supply) {
+ regulator_disable(pdata->vcca_supply);
+ regulator_put(pdata->vcca_supply);
+ pdata->vcca_supply = NULL;
+ }
+err_vcca_supply_enable:
+ if (pdata->vccd_supply) {
+ regulator_disable(pdata->vccd_supply);
+ regulator_put(pdata->vccd_supply);
+ pdata->vccd_supply = NULL;
+ }
+err_vccd_supply_enable:
+err_gpio_reset_dir:
+ if (gpio_is_valid(pdata->gpio_reset))
+ gpio_free(pdata->gpio_reset);
+err_gpio_reset_req:
+
+ return error;
+}
+
+static void himax_gpio_power_deconfig(struct himax_platform_data *pdata)
+{
+ if (gpio_is_valid(pdata->gpio_irq)) {
+ I("free gpio_irq = %d", pdata->gpio_irq);
+ gpio_free(pdata->gpio_irq);
+ }
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ I("free gpio_reset = %d", pdata->gpio_reset);
+ gpio_free(pdata->gpio_reset);
+ }
+
+ if (pdata->vcca_supply) {
+ regulator_disable(pdata->vcca_supply);
+ regulator_put(pdata->vcca_supply);
+ pdata->vcca_supply = NULL;
+ }
+ if (pdata->vccd_supply) {
+ regulator_disable(pdata->vccd_supply);
+ regulator_put(pdata->vccd_supply);
+ pdata->vccd_supply = NULL;
+ }
+}
+
+static int himax_spi_read(struct himax_ts_data *ts, u8 *cmd,
+ u8 cmd_len, u8 *buf, u32 len)
+{
+ struct spi_message m;
+ int result = NO_ERR;
+ int retry;
+ int error;
+ struct spi_transfer t = {
+ .len = cmd_len + len,
+ };
+
+ t.tx_buf = ts->xfer_data;
+ t.rx_buf = ts->xfer_data;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+
+ for (retry = 0; retry < HIMAX_BUS_RETRY_TIMES; retry++) {
+ error = spi_sync(ts->spi, &m);
+ if (unlikely(error))
+ E("SPI read error: %d", error);
+ else
+ break;
+ }
+
+ if (retry == HIMAX_BUS_RETRY_TIMES) {
+ E("SPI read error retry over %d", HIMAX_BUS_RETRY_TIMES);
+ result = -EIO;
+ goto END;
+ } else {
+ memcpy(buf, ts->xfer_data + cmd_len, len);
+ }
+
+END:
+ return result;
+}
+
+static int himax_spi_write(struct himax_ts_data *ts, u8 *buf,
+ u32 length)
+{
+ int status;
+ struct spi_message m;
+ struct spi_transfer t = {
+ .tx_buf = buf,
+ .len = length,
+ };
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+
+ status = spi_sync(ts->spi, &m);
+
+ if (status == 0) {
+ status = m.status;
+ if (status == 0)
+ status = m.actual_length;
+ }
+
+ return status;
+}
+
+int himax_bus_read(struct himax_ts_data *ts, u8 cmd,
+ u8 *buf, u32 len)
+{
+ int result = -1;
+ u8 hw_addr = 0x00;
+
+ if (len > BUS_R_DLEN) {
+ E("len[%d] is over %d", len, BUS_R_DLEN);
+ return result;
+ }
+
+ mutex_lock(&ts->rw_lock);
+
+ if (ts->select_slave_reg) {
+ hw_addr = ts->slave_read_reg;
+ I("now addr=0x%02X!", hw_addr);
+ } else {
+ hw_addr = 0xF3;
+ }
+
+ memset(ts->xfer_data, 0, BUS_R_HLEN + len);
+ ts->xfer_data[0] = hw_addr;
+ ts->xfer_data[1] = cmd;
+ ts->xfer_data[2] = 0x00;
+ result = himax_spi_read(ts, ts->xfer_data, BUS_R_HLEN, buf, len);
+
+ mutex_unlock(&ts->rw_lock);
+
+ return result;
+}
+
+int himax_bus_write(struct himax_ts_data *ts, u8 cmd,
+ u8 *addr, u8 *data, u32 len)
+{
+ int result = -1;
+ u8 offset = 0;
+ u32 tmp_len = len;
+ u8 hw_addr = 0x00;
+
+ if (len > BUS_W_DLEN) {
+ E("len[%d] is over %d", len, BUS_W_DLEN);
+ return -EFAULT;
+ }
+
+ mutex_lock(&ts->rw_lock);
+
+ if (ts->select_slave_reg) {
+ hw_addr = ts->slave_write_reg;
+ I("now addr=0x%02X!", hw_addr);
+ } else {
+ hw_addr = 0xF2;
+ }
+
+ ts->xfer_data[0] = hw_addr;
+ ts->xfer_data[1] = cmd;
+ offset = BUS_W_HLEN;
+
+ if (addr) {
+ memcpy(ts->xfer_data + offset, addr, 4);
+ offset += 4;
+ tmp_len -= 4;
+ }
+
+ if (data)
+ memcpy(ts->xfer_data + offset, data, tmp_len);
+
+ result = himax_spi_write(ts, ts->xfer_data, len + BUS_W_HLEN);
+
+ mutex_unlock(&ts->rw_lock);
+
+ return result;
+}
+
+void himax_int_enable(struct himax_ts_data *ts, int enable)
+{
+ unsigned long irqflags = 0;
+ int irqnum = ts->hx_irq;
+
+ spin_lock_irqsave(&ts->irq_lock, irqflags);
+ D("Entering! irqnum = %d", irqnum);
+ if (enable == 1 && atomic_read(&ts->irq_state) == 0) {
+ atomic_set(&ts->irq_state, 1);
+ enable_irq(irqnum);
+ ts->irq_enabled = 1;
+ } else if (enable == 0 && atomic_read(&ts->irq_state) == 1) {
+ atomic_set(&ts->irq_state, 0);
+ disable_irq_nosync(irqnum);
+ ts->irq_enabled = 0;
+ }
+
+ I("interrupt enable = %d", enable);
+ spin_unlock_irqrestore(&ts->irq_lock, irqflags);
+}
+
+static void himax_ts_isr_func(struct himax_ts_data *ts)
+{
+ himax_ts_work(ts);
+}
+
+static irqreturn_t himax_ts_thread(int irq, void *ptr)
+{
+ himax_ts_isr_func((struct himax_ts_data *)ptr);
+
+ return IRQ_HANDLED;
+}
+
+static void himax_ts_work_func(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work,
+ struct himax_ts_data, work);
+
+ himax_ts_work(ts);
+}
+
+static int himax_int_register_trigger(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ if (ts->ic_data->HX_INT_IS_EDGE) {
+ I("edge triiger falling");
+ ret = request_threaded_irq(ts->hx_irq, NULL, himax_ts_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ himax_dev_name, ts);
+ } else {
+ I("level trigger low");
+ ret = request_threaded_irq(ts->hx_irq, NULL, himax_ts_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT, himax_dev_name, ts);
+ }
+
+ return ret;
+}
+
+static int himax_ts_register_interrupt(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ ts->irq_enabled = 0;
+
+ /* Work functon */
+ if (ts->hx_irq) {/*INT mode*/
+ ts->use_irq = 1;
+ ret = himax_int_register_trigger(ts);
+
+ if (ret == 0) {
+ ts->irq_enabled = 1;
+ atomic_set(&ts->irq_state, 1);
+ I("irq enabled at number: %d",
+ ts->hx_irq);
+ } else {
+ ts->use_irq = 0;
+ E("request_irq failed");
+ }
+ } else {
+ I("ts->hx_irq is empty, use polling mode.");
+ }
+
+ /*if use polling mode need to disable HX_ESD_RECOVERY function*/
+ if (!ts->use_irq) {
+ ts->himax_wq = create_singlethread_workqueue("himax_touch");
+ INIT_WORK(&ts->work, himax_ts_work_func);
+ hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ ts->timer.function = himax_ts_timer_func;
+ hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+ I("polling mode enabled");
+ }
+
+ return ret;
+}
+
+static int himax_ts_unregister_interrupt(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ I("entered.");
+
+ /* Work functon */
+ if (ts->hx_irq && ts->use_irq) {/*INT mode*/
+ free_irq(ts->hx_irq, ts);
+ I("irq disabled at qpio: %d",
+ ts->hx_irq);
+ }
+
+ /*if use polling mode need to disable HX_ESD_RECOVERY function*/
+ if (!ts->use_irq) {
+ hrtimer_cancel(&ts->timer);
+ cancel_work_sync(&ts->work);
+ if (ts->himax_wq)
+ destroy_workqueue(ts->himax_wq);
+ I("polling mode destroyed");
+ }
+
+ return ret;
+}
+
+#if defined(CONFIG_FB)
+static int fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ const struct fb_event *evdata = data;
+ int *blank;
+ struct himax_ts_data *ts =
+ container_of(self, struct himax_ts_data, fb_notif);
+
+ I("entered");
+
+ if (!ts) {
+ E("ts is NULL");
+ return -ECANCELED;
+ }
+
+ if (!ts->ic_boot_done) {
+ E("IC is booting");
+ return -ECANCELED;
+ }
+
+ if (evdata && evdata->data &&
+ event == FB_EVENT_BLANK &&
+ ts->dev) {
+ blank = evdata->data;
+
+ switch (*blank) {
+ case FB_BLANK_UNBLANK:
+ himax_resume(ts->dev);
+ break;
+
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ himax_suspend(ts->dev);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static void himax_fb_register(struct work_struct *work)
+{
+ int ret = 0;
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_att.work);
+
+ ts->fb_notif.notifier_call = fb_notifier_callback;
+ ret = fb_register_client(&ts->fb_notif);
+
+ if (ret)
+ E("Unable to register fb_notifier: %d", ret);
+}
+#endif
+
+static void hx_check_power_status(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_pwr.work);
+
+ ts->latest_power_status = power_supply_is_system_supplied();
+
+ I("Update ts->latest_power_status = %X", ts->latest_power_status);
+
+ himax_cable_detect_func(ts, true);
+}
+
+static int pwr_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct himax_ts_data *ts = container_of(self, struct himax_ts_data,
+ power_notif);
+ I("entered. event = %lX", event);
+
+ cancel_delayed_work_sync(&ts->work_pwr);
+ queue_delayed_work(ts->himax_pwr_wq, &ts->work_pwr,
+ msecs_to_jiffies(1100));
+
+ return 0;
+}
+
+static void himax_pwr_register(struct work_struct *work)
+{
+ int ret = 0;
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_pwr.work);
+
+ ts->power_notif.notifier_call = pwr_notifier_callback;
+ ret = power_supply_reg_notifier(&ts->power_notif);
+ if (ret) {
+ E("Unable to register power_notif: %d", ret);
+ } else {
+ INIT_DELAYED_WORK(&ts->work_pwr, hx_check_power_status);
+ queue_delayed_work(ts->himax_pwr_wq, &ts->work_pwr,
+ msecs_to_jiffies(3000));
+ }
+}
+
+
+/* COMMON*/
+/* CORE_IC */
+/* IC side start*/
+static void himax_mcu_burst_enable(struct himax_ts_data *ts,
+ u8 auto_add_4_byte)
+{
+ u8 tmp_data[DATA_LEN_4];
+ int ret;
+
+ /*I("Entering");*/
+ tmp_data[0] = IC_GET_VAL(data_conti);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_conti), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+
+ tmp_data[0] = (IC_GET_VAL(data_incr4) | auto_add_4_byte);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_incr4), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+}
+
+static int himax_mcu_register_read(struct himax_ts_data *ts, u8 *addr,
+ u8 *buf, u32 len)
+{
+ int ret = -1;
+ u32 orig_addr = le32_to_cpup((__le32 *)addr);
+
+ mutex_lock(&ts->reg_lock);
+
+ if (orig_addr == flash_addr_spi200_data)
+ g_core_fp.fp_burst_enable(ts, 0);
+ else if (len > DATA_LEN_4)
+ g_core_fp.fp_burst_enable(ts, 1);
+ else
+ g_core_fp.fp_burst_enable(ts, 0);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_addr_byte_0), addr, NULL, 4);
+ if (ret < 0) {
+ E("bus access fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_access_direction), NULL,
+ IC_GET_ARRAY(data_ahb_access_direction_read), 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+
+ ret = himax_bus_read(ts, IC_GET_VAL(addr_ahb_rdata_byte_0), buf, len);
+ if (ret < 0) {
+ E("bus access fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+
+ mutex_unlock(&ts->reg_lock);
+
+ return NO_ERR;
+}
+
+static int himax_mcu_reg_read(struct himax_ts_data *ts, struct hx_reg_t *addr,
+ struct data_pack_t *data)
+{
+ return g_core_fp.fp_register_read(ts,
+ addr->data.byte, data->data.byte, data->len);
+}
+
+static int himax_mcu_register_write(struct himax_ts_data *ts, u8 *addr,
+ u8 *val, u32 len)
+{
+ int ret = -1;
+ const u32 max_trans_sz = 4 * 1024;
+ int i = 0;
+ u32 orig_addr = 0;
+ union hx_dword_data_t temp_addr = {0};
+ u32 temp_len = 0;
+
+ mutex_lock(&ts->reg_lock);
+ orig_addr = le32_to_cpup((__le32 *)addr);
+ if (orig_addr == flash_addr_spi200_data)
+ g_core_fp.fp_burst_enable(ts, 0);
+ else if (len > DATA_LEN_4)
+ g_core_fp.fp_burst_enable(ts, 1);
+ else
+ g_core_fp.fp_burst_enable(ts, 0);
+
+ if (len > max_trans_sz) {
+ for (i = 0; i < len; i += max_trans_sz) {
+ if ((len - i) > max_trans_sz)
+ temp_len = max_trans_sz;
+ else
+ temp_len = len % max_trans_sz;
+ temp_addr.dword = cpu_to_le32(orig_addr + i);
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_addr_byte_0),
+ temp_addr.byte, val + i, temp_len + ADDR_LEN_4);
+ if (ret < 0) {
+ E("xfer fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+ }
+ } else {
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_addr_byte_0), addr, val,
+ len + ADDR_LEN_4);
+ if (ret < 0) {
+ E("xfer fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+ }
+
+ mutex_unlock(&ts->reg_lock);
+
+ return NO_ERR;
+}
+
+static int himax_mcu_reg_write(struct himax_ts_data *ts,
+ struct hx_reg_t *addr, struct data_pack_t *data)
+{
+ return g_core_fp.fp_register_write(ts,
+ addr->data.byte, data->data.byte, data->len);
+}
+
+static void himax_mcu_interface_on(struct himax_ts_data *ts)
+{
+ u8 tmp_data[DATA_LEN_4];
+ u8 tmp_data2[DATA_LEN_4];
+ int cnt = 0;
+ int ret = 0;
+
+ /* Read a dummy register to wake up BUS.*/
+ ret = himax_bus_read(ts, IC_GET_VAL(addr_ahb_rdata_byte_0), tmp_data,
+ DATA_LEN_4);
+ if (ret < 0) {/* to knock BUS*/
+ E("bus access fail!");
+ return;
+ }
+
+ do {
+ tmp_data[0] = IC_GET_VAL(data_conti);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_conti), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+
+ tmp_data[0] = IC_GET_VAL(data_incr4);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_incr4), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+
+ /*Check cmd*/
+ himax_bus_read(ts, IC_GET_VAL(addr_conti), tmp_data, 1);
+ himax_bus_read(ts, IC_GET_VAL(addr_incr4), tmp_data2, 1);
+
+ if (tmp_data[0] == IC_GET_VAL(data_conti) &&
+ tmp_data2[0] == IC_GET_VAL(data_incr4))
+ break;
+
+ usleep_range(1000, 1100);
+ } while (++cnt < 10);
+
+ if (cnt > 0)
+ I("Polling burst mode: %d times", cnt);
+}
+
+static void himax_mcu_power_on_init(struct himax_ts_data *ts)
+{
+ union hx_dword_data_t tmp_data = { .byte = {0x01, 0x00, 0x00, 0x00} };
+ u8 retry = 0;
+
+ /*RawOut select initial*/
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_raw_out_sel),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+ /*DSRAM func initial*/
+ g_core_fp.fp_assign_sorting_mode(ts, FW_GET_ARRAY(data_clear));
+ /*N frame initial*/
+ /* reset N frame back to default value 1 for normal mode */
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_set_frame_addr),
+ tmp_data.byte, 4);
+ /*FW reload done initial*/
+ g_core_fp.fp_register_write(ts,
+ DRV_GET_ARRAY(addr_fw_define_2nd_flash_reload),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+
+ g_core_fp.fp_sense_on(ts, 0x00);
+
+ I("waiting for FW reload data");
+
+ while (retry++ < 30) {
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_2nd_flash_reload), tmp_data.byte,
+ DATA_LEN_4);
+
+ /* use all 4 bytes to compare */
+ if (le32_to_cpu(tmp_data.dword) == 0x72C0) {
+ I("FW reload done");
+ break;
+ }
+ I("wait FW reload %d times", retry);
+ g_core_fp.fp_read_FW_status(ts);
+ usleep_range(10000, 11000);
+ }
+}
+
+/* IC side end*/
+/* CORE_IC */
+
+/* CORE_FW */
+/* FW side start*/
+static void himax_mcu_system_reset(struct himax_ts_data *ts)
+{
+ int ret = 0;
+ u8 tmp_data[DATA_LEN_4];
+ int retry = 0;
+
+ g_core_fp.fp_interface_on(ts);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+ do {
+ /* reset code*/
+ /**
+ * I2C_password[7:0] set Enter safe mode : 0x31 ==> 0x27
+ */
+ tmp_data[0] = IC_GET_VAL(data_i2c_psw_lb);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(adr_i2c_psw_lb), NULL, tmp_data,
+ 1);
+ if (ret < 0)
+ E("bus access fail!");
+
+ /**
+ * I2C_password[15:8] set Enter safe mode :0x32 ==> 0x95
+ */
+ tmp_data[0] = IC_GET_VAL(data_i2c_psw_ub);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(adr_i2c_psw_ub), NULL, tmp_data,
+ 1);
+ if (ret < 0)
+ E("bus access fail!");
+
+ /**
+ * I2C_password[7:0] set Enter safe mode : 0x31 ==> 0x00
+ */
+ tmp_data[0] = 0x00;
+
+ ret = himax_bus_write(ts, IC_GET_VAL(adr_i2c_psw_lb), NULL, tmp_data,
+ 1);
+ if (ret < 0)
+ E("bus access fail!");
+
+ usleep_range(10000, 11000);
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_flag_reset_event),
+ tmp_data, DATA_LEN_4);
+ I("Read status from IC = %X,%X", tmp_data[0], tmp_data[1]);
+ } while ((tmp_data[1] != 0x02 || tmp_data[0] != 0x00) && retry++ < 5);
+}
+
+static void himax_mcu_usb_detect_set(struct himax_ts_data *ts,
+ const u8 *cable_config)
+{
+ struct hx_reg_t tmp_reg;
+ struct hx_reg_t back_reg;
+ u8 retry_cnt = 0;
+
+ do {
+ if (cable_config[1] == 0x01) {
+ WORD_REG(tmp_reg, fw_func_handshaking_pwd);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_usb_detect),
+ REG_GET_ARRAY(tmp_reg), REG_GET_SZ(tmp_reg));
+ WORD_REG(back_reg, fw_func_handshaking_pwd);
+ I("USB detect status IN!");
+ } else {
+ WORD_REG(tmp_reg, fw_data_safe_mode_release_pw_reset);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_usb_detect),
+ REG_GET_ARRAY(tmp_reg), REG_GET_SZ(tmp_reg));
+ WORD_REG(back_reg, fw_data_safe_mode_release_pw_reset);
+ I("USB detect status OUT!");
+ }
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_usb_detect),
+ REG_GET_ARRAY(tmp_reg), REG_GET_SZ(tmp_reg));
+ /*I("tmp_data[0]=%d, USB detect=%d, retry_cnt=%d",
+ * tmp_data[0], cable_config[1], retry_cnt);
+ */
+ retry_cnt++;
+ } while ((REG_GET_ARRAY(tmp_reg)[3] != REG_GET_ARRAY(back_reg)[3] ||
+ REG_GET_ARRAY(tmp_reg)[2] != REG_GET_ARRAY(back_reg)[2] ||
+ REG_GET_ARRAY(tmp_reg)[1] != REG_GET_ARRAY(back_reg)[1] ||
+ REG_GET_ARRAY(tmp_reg)[0] != REG_GET_ARRAY(back_reg)[0]) &&
+ retry_cnt < HIMAX_REG_RETRY_TIMES);
+}
+
+/* Please call this function after FW finish reload done */
+static void himax_mcu_read_FW_ver(struct himax_ts_data *ts)
+{
+ u8 data[12] = {0};
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_fw_ver_addr), data,
+ DATA_LEN_4);
+ ts->ic_data->vendor_panel_ver = data[0];
+ ts->ic_data->vendor_fw_ver = data[1] << 8 | data[2];
+ I("PANEL_VER : %X", ts->ic_data->vendor_panel_ver);
+ I("FW_VER : %X", ts->ic_data->vendor_fw_ver);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_fw_cfg_addr), data,
+ DATA_LEN_4);
+ ts->ic_data->vendor_config_ver = data[2] << 8 | data[3];
+ /*I("CFG_VER : %X",ts->ic_data->vendor_config_ver);*/
+ ts->ic_data->vendor_touch_cfg_ver = data[2];
+ I("TOUCH_VER : %X", ts->ic_data->vendor_touch_cfg_ver);
+ ts->ic_data->vendor_display_cfg_ver = data[3];
+ I("DISPLAY_VER : %X", ts->ic_data->vendor_display_cfg_ver);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_fw_vendor_addr), data,
+ DATA_LEN_4);
+ ts->ic_data->vendor_cid_maj_ver = data[2];
+ ts->ic_data->vendor_cid_min_ver = data[3];
+ I("CID_VER : %X", (ts->ic_data->vendor_cid_maj_ver << 8
+ | ts->ic_data->vendor_cid_min_ver));
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_cus_info), data, 12);
+ memcpy(ts->ic_data->vendor_cus_info, data, 12);
+ I("Cusomer ID = %s", ts->ic_data->vendor_cus_info);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_proj_info), data, 12);
+ memcpy(ts->ic_data->vendor_proj_info, data, 12);
+ I("Project ID = %s", ts->ic_data->vendor_proj_info);
+ hx_hid_update_info(ts);
+}
+
+static u32 dbg_reg_ary[4] = {fw_addr_fw_dbg_msg_addr,
+ fw_addr_chk_fw_status, fw_addr_chk_dd_status, fw_addr_flag_reset_event};
+
+static void himax_mcu_read_FW_status(struct himax_ts_data *ts)
+{
+ u8 len = 0;
+ u8 i = 0;
+ struct hx_reg_t addr_reg;
+ u8 data[4] = {0};
+
+ len = (u8)(sizeof(dbg_reg_ary) / sizeof(u32));
+
+ for (i = 0; i < len; i++) {
+ WORD_REG(addr_reg, dbg_reg_ary[i]);
+ g_core_fp.fp_register_read(ts, REG_GET_ARRAY(addr_reg),
+ data, DATA_LEN_4);
+
+ I("reg[0-3] : 0x%08X = 0x%02X, 0x%02X, 0x%02X, 0x%02X",
+ dbg_reg_ary[i], data[0], data[1], data[2], data[3]);
+ }
+}
+
+static void himax_mcu_irq_switch(struct himax_ts_data *ts, int switch_on)
+{
+ if (switch_on) {
+ if (ts->use_irq)
+ himax_int_enable(ts, switch_on);
+ else
+ hrtimer_start(&ts->timer, ktime_set(1, 0),
+ HRTIMER_MODE_REL);
+ } else {
+ if (ts->use_irq) {
+ himax_int_enable(ts, switch_on);
+ } else {
+ hrtimer_cancel(&ts->timer);
+ cancel_work_sync(&ts->work);
+ }
+ }
+}
+
+static int himax_mcu_assign_sorting_mode(struct himax_ts_data *ts,
+ u8 *tmp_data_in)
+{
+ u8 retry = 0;
+ union hx_dword_data_t rdata = {0};
+ u32 sorting_addr = FW_GET_VAL(addr_sorting_mode_en);
+ union hx_dword_data_t *tmp_data = (union hx_dword_data_t *)tmp_data_in;
+
+ I("addr: 0x%08X, write: 0x%08X",
+ sorting_addr, le32_to_cpu(tmp_data->dword));
+
+ while (retry++ < 3) {
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_sorting_mode_en),
+ tmp_data->byte, DATA_LEN_4);
+ usleep_range(1000, 1100);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_sorting_mode_en),
+ rdata.byte, DATA_LEN_4);
+
+ if (rdata.dword == tmp_data->dword) {
+ I("success to write sorting mode");
+ return NO_ERR;
+ }
+ E("fail to write sorting mode");
+ }
+
+ return BUS_FAIL;
+}
+
+static void hx_ap_notify_fw_sus(struct himax_ts_data *ts, int suspend)
+{
+ int retry = 0;
+ int read_sts = 0;
+ union hx_dword_data_t read_tmp = {0};
+ union hx_dword_data_t addr_tmp = {0};
+ union hx_dword_data_t data_tmp = {0};
+
+ addr_tmp.dword = FW_GET_VAL(addr_ap_notify_fw_sus);
+
+ if (suspend) {
+ I("Suspend mode!");
+ data_tmp.dword = FW_GET_VAL(data_ap_notify_fw_sus_en);
+ } else {
+ I("Non-Suspend mode!");
+ data_tmp.dword = FW_GET_VAL(data_ap_notify_fw_sus_dis);
+ }
+
+ I("R%08XH<-0x%08X", addr_tmp.dword, data_tmp.dword);
+ addr_tmp.dword = cpu_to_le32(addr_tmp.dword);
+ data_tmp.dword = cpu_to_le32(data_tmp.dword);
+ do {
+ g_core_fp.fp_register_write(ts, addr_tmp.byte, data_tmp.byte,
+ sizeof(data_tmp.byte));
+ usleep_range(1000, 1001);
+ read_sts = g_core_fp.fp_register_read(ts, addr_tmp.byte, read_tmp.byte,
+ sizeof(read_tmp.byte));
+ I("read bus status=%d", read_sts);
+ I("Now retry=%d, data=0x%08X", retry,
+ le32_to_cpu(read_tmp.dword));
+ } while ((retry++ < 10) && (read_sts != NO_ERR) &&
+ (read_tmp.dword != data_tmp.dword));
+}
+
+/* FW side end*/
+/* CORE_FW */
+
+/* CORE_FLASH */
+/* FLASH side start*/
+
+
+/* CORE_DRIVER */
+static void himax_suspend_proc(struct himax_ts_data *ts, bool suspended)
+{
+ I("himax suspend.");
+}
+
+static void himax_resume_proc(struct himax_ts_data *ts, bool suspended)
+{
+ int result = 0;
+
+ I("himax resume.");
+
+ if (g_core_fp.fp_resend_cmd_func) {
+ g_core_fp.fp_resend_cmd_func(ts, suspended);
+ ts->resume_success = true;
+ }
+
+
+ if (g_core_fp.fp_ap_notify_fw_sus && result == 0)
+ g_core_fp.fp_ap_notify_fw_sus(ts, 0);
+}
+
+static void himax_mcu_pin_reset(struct himax_ts_data *ts)
+{
+ const int rst_low_period_s = RST_LOW_PERIOD_S;
+ const int rst_low_period_e = RST_LOW_PERIOD_E;
+ int rst_high_period_s;
+ int rst_high_period_e;
+
+ I("Now reset the Touch chip.");
+
+ rst_high_period_s = RST_HIGH_PERIOD_S;
+ rst_high_period_e = RST_HIGH_PERIOD_E;
+
+ himax_rst_gpio_set(ts->rst_gpio, 0);
+ usleep_range(rst_low_period_s, rst_low_period_e);
+ himax_rst_gpio_set(ts->rst_gpio, 1);
+ usleep_range(rst_high_period_s, rst_high_period_e);
+}
+
+static void himax_mcu_ic_reset(struct himax_ts_data *ts, u8 loadconfig,
+ u8 int_off)
+{
+ I("status: loadconfig=%d,int_off=%d", loadconfig, int_off);
+
+ if (ts->rst_gpio >= 0) {
+ if (int_off)
+ g_core_fp.fp_irq_switch(ts, 0);
+
+ g_core_fp.fp_pin_reset(ts);
+
+ if (int_off)
+ g_core_fp.fp_irq_switch(ts, 1);
+ }
+}
+
+static u8 himax_mcu_tp_info_check(struct himax_ts_data *ts)
+{
+ union hx_dword_data_t addr;
+ char data[DATA_LEN_4] = {0};
+ u32 rx_num;
+ u32 tx_num;
+ u32 bt_num;
+ u32 max_pt;
+ u32 y_res;
+ u32 x_res;
+ u8 int_is_edge;
+ u8 stylus_func;
+ u8 stylus_id_v2;
+ u8 stylus_ratio;
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_rxnum_txnum), data, DATA_LEN_4);
+ rx_num = data[2];
+ tx_num = data[3];
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_maxpt_xyrvs), data, DATA_LEN_4);
+ max_pt = data[0];
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_x_y_res), data, DATA_LEN_4);
+ y_res = be16_to_cpup((u16 *)&data[0]);
+ x_res = be16_to_cpup((u16 *)&data[2]);
+ /* I("rx_num=%d, tx_num=%d, max_pt=%d, y_res=%d, x_res=%d",
+ * rx_num, tx_num, max_pt, y_res, x_res);
+ */
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_int_is_edge), data, DATA_LEN_4);
+ if ((data[1] & 0x01) == 1)
+ int_is_edge = true;
+ else
+ int_is_edge = false;
+
+ /*1. Read number of MKey R100070E8H to determin data size*/
+ g_core_fp.fp_register_read(ts, SRAM_GET_ARRAY(addr_mkey), data,
+ DATA_LEN_4);
+ bt_num = data[0] & 0x03;
+ ts->ic_data->HX_BT_NUM = bt_num;
+
+ addr.dword = 0x1000719C;
+ addr.dword = cpu_to_le32(addr.dword);
+
+ g_core_fp.fp_register_read(ts, addr.byte, data, DATA_LEN_4);
+ stylus_func = data[3];
+ ts->ic_data->HX_STYLUS_FUNC = stylus_func;
+
+ ts->ic_data->HX_RX_NUM = rx_num;
+
+ ts->ic_data->HX_TX_NUM = tx_num;
+
+ ts->ic_data->HX_X_RES = x_res;
+ ts->ic_data->HX_Y_RES = y_res;
+ ts->ic_data->HX_MAX_PT = max_pt;
+ ts->ic_data->HX_INT_IS_EDGE = int_is_edge;
+
+ if (ts->ic_data->HX_STYLUS_FUNC) {
+ addr.dword = 0x100071FC;
+ addr.dword = cpu_to_le32(addr.dword);
+ g_core_fp.fp_register_read(ts, addr.byte, data, DATA_LEN_4);
+ stylus_id_v2 = data[2];/* 0x100071FE 0=off 1=on */
+ stylus_ratio = data[3];
+ /* 0x100071FF 0=ratio_1 10=ratio_10 */
+ ts->ic_data->HX_STYLUS_ID_V2 = stylus_id_v2;
+ ts->ic_data->HX_STYLUS_RATIO = stylus_ratio;
+ }
+
+ I("TOUCH_INFO updated");
+
+ return 0;
+}
+
+static void himax_mcu_touch_information(struct himax_ts_data *ts)
+{
+ if (ts->ic_data->HX_RX_NUM == 0xFFFFFFFF)
+ ts->ic_data->HX_RX_NUM = FIX_HX_RX_NUM;
+
+ if (ts->ic_data->HX_TX_NUM == 0xFFFFFFFF)
+ ts->ic_data->HX_TX_NUM = FIX_HX_TX_NUM;
+
+ if (ts->ic_data->HX_BT_NUM == 0xFFFFFFFF)
+ ts->ic_data->HX_BT_NUM = FIX_HX_BT_NUM;
+
+ if (ts->ic_data->HX_MAX_PT == 0xFFFFFFFF)
+ ts->ic_data->HX_MAX_PT = FIX_HX_MAX_PT;
+
+ if (ts->ic_data->HX_INT_IS_EDGE == 0xFF)
+ ts->ic_data->HX_INT_IS_EDGE = FIX_HX_INT_IS_EDGE;
+
+ if (ts->ic_data->HX_STYLUS_FUNC == 0xFF)
+ ts->ic_data->HX_STYLUS_FUNC = FIX_HX_STYLUS_FUNC;
+
+ if (ts->ic_data->HX_STYLUS_ID_V2 == 0xFF)
+ ts->ic_data->HX_STYLUS_ID_V2 = FIX_HX_STYLUS_ID_V2;
+
+ if (ts->ic_data->HX_STYLUS_RATIO == 0xFF)
+ ts->ic_data->HX_STYLUS_RATIO = FIX_HX_STYLUS_RATIO;
+
+ I("HX_RX_NUM = %d,HX_TX_NUM = %d",
+ ts->ic_data->HX_RX_NUM, ts->ic_data->HX_TX_NUM);
+ I("HX_MAX_PT = %d", ts->ic_data->HX_MAX_PT);
+ I("HX_INT_IS_EDGE = %d,HX_STYLUS_FUNC = %d",
+ ts->ic_data->HX_INT_IS_EDGE, ts->ic_data->HX_STYLUS_FUNC);
+ I("HX_STYLUS_ID_V2 = %d,HX_STYLUS_RATIO = %d",
+ ts->ic_data->HX_STYLUS_ID_V2, ts->ic_data->HX_STYLUS_RATIO);
+}
+
+static void himax_mcu_calc_touch_data_size(struct himax_ts_data *ts)
+{
+ ts->x_channel = ts->ic_data->HX_RX_NUM;
+ ts->y_channel = ts->ic_data->HX_TX_NUM;
+ ts->n_finger_support = ts->ic_data->HX_MAX_PT;
+}
+
+static int himax_mcu_ic_excp_recovery
+ (struct himax_ts_data *ts,
+ u32 hx_excp_event,
+ u32 hx_zero_event,
+ u32 length)
+{
+ int ret_val = NO_ERR;
+
+ if (hx_excp_event == length) {
+ ts->excp_zero_event_count = 0;
+ ret_val = HX_EXCP_EVENT;
+ } else if (hx_zero_event == length) {
+ if (ts->excp_zero_event_count > 5) {
+ ts->excp_zero_event_count = 0;
+ I("EXCEPTION event checked - ALL Zero.");
+ ret_val = HX_EXCP_EVENT;
+ } else {
+ ts->excp_zero_event_count++;
+ I("ALL Zero event is %d times.",
+ ts->excp_zero_event_count);
+ ret_val = HX_ZERO_EVENT_COUNT;
+ }
+ }
+
+ return ret_val;
+}
+
+static void himax_mcu_excp_ic_reset(struct himax_ts_data *ts)
+{
+ ts->excp_reset_active = 0;
+ himax_mcu_pin_reset(ts);
+ I("reset!");
+}
+
+static void himax_mcu_resend_cmd_func(struct himax_ts_data *ts, bool suspended)
+{
+ himax_cable_detect_func(ts, true);
+}
+
+/* CORE_DRIVER */
+
+static void hx_dis_rload_0f(struct himax_ts_data *ts, int disable)
+{
+ /*Disable Flash Reload*/
+ g_core_fp.fp_register_write(ts,
+ DRV_GET_ARRAY(addr_fw_define_flash_reload),
+ ZF_GET_ARRAY(data_dis_flash_reload), DATA_LEN_4);
+}
+
+static bool hx83102j_chip_detect(struct himax_ts_data *ts)
+{
+ DEF_WORD_DATA(tmp_data);
+ struct hx_reg_t tmp_addr;
+ bool ret_data = false;
+ int ret = 0;
+ int i = 0;
+ bool check_flash;
+
+ g_core_fp.fp_pin_reset(ts);
+ ret = himax_bus_read(ts, 0x13, tmp_data.data.byte, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return false;
+ }
+
+ check_flash = true;
+
+ if (g_core_fp.fp_sense_off(ts, check_flash) == false) {
+ ret_data = false;
+ E("hx83102_sense_off Fail!");
+ return ret_data;
+ }
+
+ for (i = 0; i < 5; i++) {
+ WORD_REG(tmp_addr, 0x900000D0);
+ ret = g_core_fp.fp_reg_read(ts, &tmp_addr, &tmp_data);
+ if (ret != 0) {
+ ret_data = false;
+ E("read ic id Fail");
+ return ret_data;
+ }
+
+ if (((*tmp_data.data.word) & 0x83102900) == 0x83102900) {
+ strscpy(ts->chip_name,
+ HX83102J_ID, 30);
+ (ts->ic_data)->ic_adc_num =
+ hx83102j_data_adc_num;
+ ts->ic_data->flash_size = HX83102J_FLASH_SIZE;
+ ts->ic_data->icid = *tmp_data.data.word;
+ I("detect IC HX83102J successfully");
+ ret_data = true;
+ break;
+ }
+ E("Read driver IC ID = %X,%X,%X",
+ tmp_data_array[3],
+ tmp_data_array[2], tmp_data_array[1]); /*83,10,2X*/
+ ret_data = false;
+ E("Read driver ID register Fail!");
+ E("Could NOT find Himax Chipset");
+ E("Please check:\n1.VCCD,VCCA,VSP,VSN");
+ E("2. LCM_RST,TP_RST");
+ E("3. Power On Sequence");
+ }
+
+ return ret_data;
+}
+
+static void hx83102j_sense_on(struct himax_ts_data *ts, u8 flash_mode)
+{
+ int ret = 0;
+
+ DEF_WORD_DATA(tmp_data);
+
+ I("Enter");
+ ts->notouch_frame = ts->ic_notouch_frame;
+ g_core_fp.fp_interface_on(ts);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+ usleep_range(10000, 11000);
+ if (!flash_mode) {
+ g_core_fp.fp_ic_reset(ts, false, false);
+ } else {
+ tmp_data.data.half[0] = 0;
+ ret = himax_bus_write(ts, IC_GET_ARRAY(adr_i2c_psw_lb)[0], NULL,
+ tmp_data.data.byte, 2);
+ if (ret < 0) {
+ E("cmd=%x bus access fail!",
+ IC_GET_ARRAY(adr_i2c_psw_lb)[0]);
+ }
+ }
+}
+
+static bool hx83102j_sense_off(struct himax_ts_data *ts, bool check_en)
+{
+ u32 cnt = 0;
+ struct hx_reg_t tmp_addr = {0};
+ int ret = 0;
+
+ DEF_WORD_DATA(tmp_data);
+
+ do {
+ if (cnt == 0 ||
+ (tmp_data.data.byte[0] != 0xA5 &&
+ tmp_data.data.byte[0] != 0x00 &&
+ tmp_data.data.byte[0] != 0x87))
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ FW_GET_ARRAY(data_fw_stop), FW_GET_SZ(data_fw_stop));
+ usleep_range(10000, 10001);
+
+ /* check fw status */
+ g_core_fp.fp_register_read(ts, IC_GET_ARRAY(addr_cs_central_state),
+ tmp_data.data.byte, tmp_data.len);
+
+ if (tmp_data.data.byte[0] != 0x05) {
+ I("Do not need wait FW, Status = 0x%02X!", tmp_data.data.byte[0]);
+ break;
+ }
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ tmp_data.data.byte, tmp_data.len);
+ I("cnt = %d, data[0] = 0x%02X!", cnt, tmp_data.data.byte[0]);
+ } while (tmp_data.data.byte[0] != 0x87 && ++cnt < 35 && check_en);
+
+ cnt = 0;
+
+ do {
+ /**
+ * set Enter safe mode : 0x31 ==> 0x9527
+ */
+ tmp_data.data.half[0] = 0x9527;
+ ret = himax_bus_write(ts, 0x31, NULL, tmp_data.data.byte, 2);
+ if (ret < 0) {
+ E("bus access fail!");
+ return false;
+ }
+
+ /**
+ *Check enter_save_mode
+ */
+ WORD_REG(tmp_addr, 0x900000A8);
+ g_core_fp.fp_reg_read(ts, &tmp_addr, &tmp_data);
+ I("Check enter_save_mode data[0]=%X", tmp_data.data.byte[0]);
+
+ if (tmp_data.data.byte[0] == 0x0C) {
+ /**
+ *Reset TCON
+ */
+ WORD_REG(tmp_addr, 0x80020004);
+ VAL_SET(tmp_data, 0x00000000);
+ g_core_fp.fp_reg_write(ts, &tmp_addr, &tmp_data);
+ usleep_range(1000, 1001);
+ return true;
+ }
+ usleep_range(5000, 5001);
+ g_core_fp.fp_pin_reset(ts);
+ } while (cnt++ < 5);
+
+ return false;
+}
+
+static bool hx83102j_read_event_stack(struct himax_ts_data *ts,
+ u8 *buf, u32 length)
+{
+ int ret = 0;
+
+ ret = himax_bus_read(ts, FW_GET_ARRAY(addr_event_addr)[0], buf, length);
+
+ return (ret == NO_ERR) ? true : false;
+}
+
+static void hx83102j_chip_init(struct himax_ts_data *ts)
+{
+ ts->chip_cell_type = CHIP_IS_IN_CELL;
+ ts->chip_max_dsram_size = 73728;
+ I("IC cell type = %d", ts->chip_cell_type);
+ ts->ic_checksum_type = HX_TP_BIN_CHECKSUM_CRC;
+ /*Himax: Set FW and CFG Flash Address*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_fw_ver_major, 59397); /*0x00E805*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_fw_ver_minor, 59398); /*0x00E806*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cfg_ver_major, 59648); /*0x00E900*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cfg_ver_minor, 59649); /*0x00E901*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cid_ver_major, 59394); /*0x00E802*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cid_ver_minor, 59395); /*0x00E803*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cfg_table, 0x10000);
+ g_core_regs.flash_ver_info.addr_cfg_table_t.data.word =
+ g_core_regs.flash_ver_info.addr_cfg_table.data.word;
+ ts->ic_data->enc16bits = false;
+}
+
+static void himax_ic_reg_init(struct himax_core_command_regs *reg_data)
+{
+ I("Entering!");
+/* CORE_IC -start- */
+ BYTE_REG(reg_data->ic_op.addr_ahb_addr_byte_0, ic_adr_ahb_addr_byte_0);
+ BYTE_REG(reg_data->ic_op.addr_ahb_rdata_byte_0, ic_adr_ahb_rdata_byte_0);
+ BYTE_REG(reg_data->ic_op.addr_ahb_access_direction, ic_adr_ahb_access_direction);
+ BYTE_REG(reg_data->ic_op.addr_conti, ic_adr_conti);
+ BYTE_REG(reg_data->ic_op.addr_incr4, ic_adr_incr4);
+ BYTE_REG(reg_data->ic_op.adr_i2c_psw_lb, ic_adr_i2c_psw_lb);
+ BYTE_REG(reg_data->ic_op.adr_i2c_psw_ub, ic_adr_i2c_psw_ub);
+ BYTE_REG(reg_data->ic_op.data_ahb_access_direction_read, ic_cmd_ahb_access_direction_read);
+ BYTE_REG(reg_data->ic_op.data_conti, ic_cmd_conti);
+ BYTE_REG(reg_data->ic_op.data_incr4, ic_cmd_incr4);
+ BYTE_REG(reg_data->ic_op.data_i2c_psw_lb, ic_cmd_i2c_psw_lb);
+ BYTE_REG(reg_data->ic_op.data_i2c_psw_ub, ic_cmd_i2c_psw_ub);
+ WORD_REG(reg_data->ic_op.addr_tcon_on_rst, hx83102j_ic_adr_tcon_rst);
+ WORD_REG(reg_data->ic_op.addr_cs_central_state, ic_adr_cs_central_state);
+/* CORE_IC -end- */
+/* CORE_FW -start- */
+ WORD_REG(reg_data->fw_op.addr_system_reset, fw_addr_system_reset);
+ WORD_REG(reg_data->fw_op.addr_ctrl_fw_isr, fw_addr_ctrl_fw);
+ WORD_REG(reg_data->fw_op.addr_flag_reset_event, fw_addr_flag_reset_event);
+ WORD_REG(reg_data->fw_op.addr_raw_out_sel, hx83102j_fw_addr_raw_out_sel);
+ WORD_REG(reg_data->fw_op.addr_reload_status, fw_addr_reload_status);
+ WORD_REG(reg_data->fw_op.addr_reload_crc32_result,
+ fw_addr_reload_crc32_result);
+ WORD_REG(reg_data->fw_op.addr_reload_addr_from, fw_addr_reload_addr_from);
+ WORD_REG(reg_data->fw_op.addr_reload_addr_cmd_beat,
+ fw_addr_reload_addr_cmd_beat);
+ WORD_REG(reg_data->fw_op.addr_set_frame_addr, fw_addr_set_frame_addr);
+ WORD_REG(reg_data->fw_op.addr_sorting_mode_en, fw_addr_sorting_mode_en);
+ WORD_REG(reg_data->fw_op.addr_fw_ver_addr, fw_addr_fw_ver_addr);
+ WORD_REG(reg_data->fw_op.addr_fw_cfg_addr, fw_addr_fw_cfg_addr);
+ WORD_REG(reg_data->fw_op.addr_fw_vendor_addr, fw_addr_fw_vendor_addr);
+ WORD_REG(reg_data->fw_op.addr_cus_info, fw_addr_cus_info);
+ WORD_REG(reg_data->fw_op.addr_proj_info, fw_addr_proj_info);
+ WORD_REG(reg_data->fw_op.addr_ap_notify_fw_sus, fw_addr_ap_notify_fw_sus);
+ WORD_REG(reg_data->fw_op.data_ap_notify_fw_sus_en,
+ fw_data_ap_notify_fw_sus_en);
+ WORD_REG(reg_data->fw_op.data_ap_notify_fw_sus_dis,
+ fw_data_ap_notify_fw_sus_dis);
+ WORD_REG(reg_data->fw_op.data_system_reset, fw_data_system_reset);
+ WORD_REG(reg_data->fw_op.data_clear, fw_data_clear);
+ WORD_REG(reg_data->fw_op.data_fw_stop, fw_data_fw_stop);
+ BYTE_REG(reg_data->fw_op.addr_event_addr, fw_addr_event_addr);
+ WORD_REG(reg_data->fw_op.addr_usb_detect, fw_usb_detect_addr);
+/* CORE_FW -end- */
+/* CORE_SRAM */
+ /* sram start*/
+ WORD_REG(reg_data->sram_op.addr_mkey, sram_adr_mkey);
+ WORD_REG(reg_data->sram_op.addr_rawdata_addr, sram_adr_rawdata_addr);
+ HALF_REG(reg_data->sram_op.passwrd_start, sram_passwrd_start);
+ HALF_REG(reg_data->sram_op.passwrd_end, sram_passwrd_end);
+ /* sram end*/
+/* CORE_SRAM */
+/* CORE_DRIVER -start- */
+ WORD_REG(reg_data->driver_op.addr_fw_define_flash_reload,
+ driver_addr_fw_define_flash_reload);
+ WORD_REG(reg_data->driver_op.addr_fw_define_2nd_flash_reload,
+ driver_addr_fw_define_2nd_flash_reload);
+ WORD_REG(reg_data->driver_op.addr_fw_define_int_is_edge,
+ driver_addr_fw_define_int_is_edge);
+ WORD_REG(reg_data->driver_op.addr_fw_define_rxnum_txnum,
+ driver_addr_fw_define_rxnum_txnum);
+ WORD_REG(reg_data->driver_op.addr_fw_define_maxpt_xyrvs,
+ driver_addr_fw_define_maxpt_xyrvs);
+ WORD_REG(reg_data->driver_op.addr_fw_define_x_y_res,
+ driver_addr_fw_define_x_y_res);
+/* CORE_DRIVER -end- */
+ WORD_REG(reg_data->zf_op.data_dis_flash_reload, zf_data_dis_flash_reload);
+ WORD_REG(reg_data->zf_op.addr_system_reset, zf_addr_system_reset);
+ BYTE_REG(reg_data->zf_op.data_system_reset, zf_data_system_reset);
+ WORD_REG(reg_data->zf_op.data_sram_start_addr, zf_data_sram_start_addr);
+ WORD_REG(reg_data->zf_op.data_cfg_info, zf_data_cfg_info);
+ WORD_REG(reg_data->zf_op.data_fw_cfg_1, zf_data_fw_cfg_1);
+ WORD_REG(reg_data->zf_op.data_fw_cfg_2, zf_data_fw_cfg_2);
+ WORD_REG(reg_data->zf_op.data_fw_cfg_3, zf_data_fw_cfg_3);
+ WORD_REG(reg_data->zf_op.data_adc_cfg_1, zf_data_adc_cfg_1);
+ WORD_REG(reg_data->zf_op.data_adc_cfg_2, zf_data_adc_cfg_2);
+ WORD_REG(reg_data->zf_op.data_adc_cfg_3, zf_data_adc_cfg_3);
+ WORD_REG(reg_data->zf_op.data_map_table, zf_data_map_table);
+}
+
+static void himax_para_init(struct himax_ts_data *ts)
+{
+ I("Entering!");
+ ts->ic_notouch_frame = hx83102j_notouch_frame;
+}
+
+static void hx83102j_pin_reset(struct himax_ts_data *ts)
+{
+ I("Now reset the Touch chip.");
+ himax_rst_gpio_set(ts->rst_gpio, 0);
+ usleep_range(100 * 100, 101 * 100);
+ himax_rst_gpio_set(ts->rst_gpio, 1);
+ usleep_range(200 * 100, 201 * 100);
+}
+
+static void himax_ic_fp_init(void)
+{
+ I("Entering!");
+/* CORE_IC */
+ g_core_fp.fp_burst_enable = himax_mcu_burst_enable;
+ g_core_fp.fp_register_read = himax_mcu_register_read;
+ g_core_fp.fp_reg_read = himax_mcu_reg_read;
+ g_core_fp.fp_register_write = himax_mcu_register_write;
+ g_core_fp.fp_reg_write = himax_mcu_reg_write;
+ g_core_fp.fp_interface_on = himax_mcu_interface_on;
+ g_core_fp.fp_sense_on = hx83102j_sense_on;
+ g_core_fp.fp_sense_off = hx83102j_sense_off;
+ g_core_fp.fp_power_on_init = himax_mcu_power_on_init;
+/* CORE_IC */
+/* CORE_FW */
+ g_core_fp.fp_system_reset = himax_mcu_system_reset;
+ g_core_fp.fp_usb_detect_set = himax_mcu_usb_detect_set;
+ g_core_fp.fp_reload_disable = hx_dis_rload_0f;
+ g_core_fp.fp_read_FW_ver = himax_mcu_read_FW_ver;
+ g_core_fp.fp_read_FW_status = himax_mcu_read_FW_status;
+ g_core_fp.fp_irq_switch = himax_mcu_irq_switch;
+ g_core_fp.fp_assign_sorting_mode = himax_mcu_assign_sorting_mode;
+ g_core_fp.fp_ap_notify_fw_sus = hx_ap_notify_fw_sus;
+/* CORE_FW */
+/* CORE_DRIVER */
+ g_core_fp.fp_chip_detect = hx83102j_chip_detect;
+ g_core_fp.fp_chip_init = hx83102j_chip_init;
+ g_core_fp.fp_pin_reset = hx83102j_pin_reset;
+ g_core_fp.fp_ic_reset = himax_mcu_ic_reset;
+ g_core_fp.fp_tp_info_check = himax_mcu_tp_info_check;
+ g_core_fp.fp_touch_information = himax_mcu_touch_information;
+ g_core_fp.fp_calc_touch_data_size = himax_mcu_calc_touch_data_size;
+ g_core_fp.fp_ic_excp_recovery = himax_mcu_ic_excp_recovery;
+ g_core_fp.fp_excp_ic_reset = himax_mcu_excp_ic_reset;
+ g_core_fp.fp_resend_cmd_func = himax_mcu_resend_cmd_func;
+ g_core_fp.fp_read_event_stack = hx83102j_read_event_stack;
+ g_core_fp.fp_suspend_proc = himax_suspend_proc;
+ g_core_fp.fp_resume_proc = himax_resume_proc;
+/* CORE_DRIVER */
+
+}
+
+
+#if defined(CONFIG_HID_HIMAX)
+/* calculate time diff and return as milliseconds */
+static unsigned int time_diff(struct time_var *start, struct time_var *end)
+{
+ unsigned int diff = 0;
+
+ diff = (end->tv_sec - start->tv_sec) * 1000;
+ diff += (end->time_var_fine - start->time_var_fine) / time_var_fine_unit;
+
+ return diff;
+}
+#endif
+
+/* start himax_touch_get */
+static int himax_touch_get(struct himax_ts_data *ts, u8 *buf, int ts_path)
+{
+ u32 read_size = 0;
+ int ts_status = 0;
+
+ switch (ts_path) {
+ /*normal*/
+ case HX_REPORT_COORD:
+ case HX_REPORT_COORD_RAWDATA:
+ read_size = ts->touch_all_size;
+ break;
+ default:
+ break;
+ }
+
+ if (read_size == 0) {
+ E("Read size fault!");
+ ts_status = HX_TS_GET_DATA_FAIL;
+ } else {
+ if (!g_core_fp.fp_read_event_stack(ts, buf, read_size)) {
+ E("can't read data from chip!");
+ ts_status = HX_TS_GET_DATA_FAIL;
+ }
+ }
+
+ return ts_status;
+}
+
+/* start error_control*/
+static int himax_checksum_cal(struct himax_ts_data *ts, u8 *buf, int ts_path)
+{
+ u16 check_sum_cal = 0;
+ s32 i = 0;
+ int length = 0;
+ int zero_cnt = 0;
+ int ret_val = HX_TS_NORMAL_END;
+
+ /* Normal */
+ switch (ts_path) {
+ case HX_REPORT_COORD:
+ case HX_REPORT_COORD_RAWDATA:
+ length = ts->touch_info_size;
+ break;
+ default:
+ I("Neither Normal Nor SMWP error!");
+ ret_val = HX_PATH_FAIL;
+ goto END_FUNCTION;
+ }
+
+ for (i = 0; i < length; i++) {
+ check_sum_cal += buf[i];
+ if (buf[i] == 0x00)
+ zero_cnt++;
+ }
+
+ if (check_sum_cal % 0x100 != 0 && ts_path != HX_REPORT_COORD &&
+ ts_path != HX_REPORT_COORD_RAWDATA) {
+ I("point data_checksum not match check_sum_cal: 0x%02X",
+ check_sum_cal);
+ ret_val = HX_CHKSUM_FAIL;
+ } else if (zero_cnt == length) {
+ if (ts->use_irq)
+ I("[HIMAX TP MSG] All Zero event");
+
+ ret_val = HX_CHKSUM_FAIL;
+ } else {
+ if (ts_path == HX_REPORT_COORD ||
+ ts_path == HX_REPORT_COORD_RAWDATA) {
+ ret_val = HX_REPORT_DATA;
+ goto END_FUNCTION;
+ }
+ /*Need to clear event stack here*/
+ g_core_fp.fp_read_event_stack(ts, buf,
+ (HX_STACK_ORG_LEN - ts->touch_info_size));
+ }
+
+END_FUNCTION:
+ return ret_val;
+}
+
+static int hx_hid_parse(struct hid_device *hid)
+{
+ struct himax_ts_data *ts = NULL;
+ int ret;
+
+ if (!hid) {
+ E("hid is NULL");
+ return -EINVAL;
+ }
+
+ ts = hid->driver_data;
+ if (!ts) {
+ E("hid->driver_data is NULL");
+ return -EINVAL;
+ }
+
+ ret = hid_parse_report(hid, ts->hid_rd_data.rd_data,
+ ts->hid_rd_data.rd_length);
+ if (ret) {
+ E("failed parse report");
+ return ret;
+ }
+ I("rdesc parse success");
+ return 0;
+}
+
+static int hx_hid_start(struct hid_device *hid)
+{
+ D("enter");
+ return 0;
+}
+
+static void hx_hid_stop(struct hid_device *hid)
+{
+ D("enter");
+}
+
+static int hx_hid_open(struct hid_device *hid)
+{
+ D("enter");
+ return 0;
+}
+
+static void hx_hid_close(struct hid_device *hid)
+{
+ D("enter");
+}
+
+void hx_hid_update_info(struct himax_ts_data *ts)
+{
+ memcpy(&ts->hid_info.fw_bin_desc, &ts->fw_bin_desc, sizeof(struct hx_bin_desc_t));
+ ts->hid_info.vid = cpu_to_be16(ts->hid_desc.vendor_id);
+ ts->hid_info.pid = cpu_to_be16(ts->hid_desc.product_id);
+ ts->hid_info.cfg_version = ts->ic_data->vendor_touch_cfg_ver;
+ ts->hid_info.disp_version = ts->ic_data->vendor_display_cfg_ver;
+ ts->hid_info.rx = ts->ic_data->HX_RX_NUM;
+ ts->hid_info.tx = ts->ic_data->HX_TX_NUM;
+ ts->hid_info.yres = cpu_to_be16(ts->ic_data->HX_Y_RES);
+ ts->hid_info.xres = cpu_to_be16(ts->ic_data->HX_X_RES);
+ ts->hid_info.pt_num = ts->ic_data->HX_MAX_PT;
+ ts->hid_info.mkey_num = ts->ic_data->HX_BT_NUM;
+
+ // firmware table parameters, use only bl part.
+ ts->hid_info.bl_mapping.cmd = HID_FW_UPDATE_BL_CMD;
+ ts->hid_info.bl_mapping.bin_start_offset = 0;
+ ts->hid_info.bl_mapping.unit_sz = ts->ic_data->flash_size / 1024;
+}
+
+static int hx_hid_get_raw_report(const struct hid_device *hid, unsigned char reportnum,
+ __u8 *buf, size_t len, unsigned char report_type)
+{
+ struct himax_ts_data *ts = NULL;
+ int ret = 0;
+
+ ts = hid->driver_data;
+ if (!ts) {
+ E("hid->driver_data is NULL");
+ return -EINVAL;
+ }
+
+ D("reportnum:%d, len:%u, report_type:%d", reportnum, (unsigned int)len, report_type);
+
+ switch (reportnum) {
+ case ID_CONTACT_COUNT:
+ if (!ts->ic_data) {
+ E("ts->ic_data is NULL");
+ return -EINVAL;
+ }
+ buf[1] = ts->ic_data->HX_MAX_PT;
+ ret = len;
+ break;
+
+ default:
+ ret = -EINVAL;
+ };
+
+ if (ret > 0)
+ D("ret:%d", ret);
+
+ return ret;
+}
+
+static int hx_raw_request(struct hid_device *hid, unsigned char reportnum,
+ __u8 *buf, size_t len, unsigned char rtype, int reqtype)
+{
+ if (!hid) {
+ E("hid is NULL");
+ return -EINVAL;
+ }
+
+ D("report num %d, len %u, rtype %d, reqtype %d", reportnum, (unsigned int)len, rtype, reqtype);
+ switch (reqtype) {
+ case HID_REQ_GET_REPORT:
+ return hx_hid_get_raw_report(hid, reportnum, buf, len, rtype);
+ default:
+ return -EIO;
+ }
+
+ return -EINVAL;
+}
+
+static struct hid_ll_driver hx_hid_ll_driver = {
+ .parse = hx_hid_parse,
+ .start = hx_hid_start,
+ .stop = hx_hid_stop,
+ .open = hx_hid_open,
+ .close = hx_hid_close,
+ .raw_request = hx_raw_request
+};
+
+int hx_hid_report(const struct himax_ts_data *ts, u8 *data, s32 len)
+{
+ int ret = 0;
+
+ if (ts->hid)
+ ret = hid_input_report(ts->hid, HID_INPUT_REPORT, data, len, 1);
+
+ return ret;
+}
+
+static int hx_hid_desc_fetch(struct himax_ts_data *ts)
+{
+ if (!ts)
+ return -EINVAL;
+
+ I("desc_length: %d", ts->hid_desc.desc_length);
+ I("bcd_version: 0x%x", ts->hid_desc.bcd_version);
+ I("report_desc_length: %d", ts->hid_desc.report_desc_length);
+ I("max_input_length: %d", ts->hid_desc.max_input_length);
+ I("max_output_length: %d", ts->hid_desc.max_output_length);
+ I("max fragment length: %d", ts->hid_desc.max_fragment_length);
+ I("vendor_id: 0x%x", ts->hid_desc.vendor_id);
+ I("product_id: 0x%x", ts->hid_desc.product_id);
+ I("version_id: 0x%x", ts->hid_desc.version_id);
+ I("flags: 0x%x", ts->hid_desc.flags);
+
+ return 0;
+}
+
+int hx_hid_probe(struct himax_ts_data *ts)
+{
+ int ret;
+ struct hid_device *hid = NULL;
+
+ if (!ts) {
+ E("ts is NULL");
+ return -EINVAL;
+ }
+
+ ret = hx_hid_desc_fetch(ts);
+ if (ret) {
+ E("failed get hid desc");
+ return ret;
+ }
+
+ hid = ts->hid;
+ if (hid) {
+ hid_destroy_device(hid);
+ hid = NULL;
+ }
+
+ hid = hid_allocate_device();
+ if (IS_ERR(hid)) {
+ ret = PTR_ERR(hid);
+ return ret;
+ }
+
+ hid->driver_data = ts;
+ hid->ll_driver = &hx_hid_ll_driver;
+ hid->bus = BUS_SPI;
+ hid->dev.parent = &ts->spi->dev;
+
+ hid->version = ts->hid_desc.bcd_version;
+ hid->vendor = ts->hid_desc.vendor_id;
+ hid->product = ts->hid_desc.product_id;
+ snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X", "hid-hxtp",
+ hid->vendor, hid->product);
+
+ ret = hid_add_device(hid);
+ if (ret) {
+ E("failed add hid device");
+ goto err_hid_data;
+ }
+ I("hid init success");
+ ts->hid = hid;
+ mutex_unlock(&ts->hid_ioctl_lock);
+ return 0;
+
+err_hid_data:
+ hid_destroy_device(hid);
+ return ret;
+}
+
+void hx_hid_remove(struct himax_ts_data *ts)
+{
+ mutex_lock(&ts->hid_ioctl_lock);
+ if (ts && ts->hid) {
+ hid_destroy_device(ts->hid);
+ } else {
+ D("ts or hid is NULL");
+ goto OUT;
+ }
+ ts->hid = NULL;
+
+ if (ts->hid_req_cfg.fw) {
+ I("free fw");
+ kfree(ts->hid_req_cfg.fw->data);
+ kfree(ts->hid_req_cfg.fw->priv);
+ kfree(ts->hid_req_cfg.fw);
+ ts->hid_req_cfg.fw = NULL;
+ }
+OUT:
+ mutex_unlock(&ts->hid_ioctl_lock);
+}
+static void himax_excp_hw_reset(struct himax_ts_data *ts)
+{
+
+ I("START EXCEPTION Reset");
+ hx_hid_remove(ts);
+ g_core_fp.fp_excp_ic_reset(ts);
+ hx_hid_probe(ts);
+
+ I("END EXCEPTION Reset");
+}
+
+static int himax_ts_event_check(struct himax_ts_data *ts,
+ const u8 *buf, int ts_path)
+{
+ u32 hx_EB_event = 0;
+ u32 hx_EC_event = 0;
+ u32 hx_ED_event = 0;
+ u32 hx_excp_event = 0;
+ u32 hx_zero_event = 0;
+ int shaking_ret = 0;
+
+ u32 i = 0;
+ u32 length = 0;
+ int ret_val = 0;
+
+ /* Normal */
+ switch (ts_path) {
+ case HX_REPORT_COORD:
+ length = ts->touch_info_size;
+ break;
+ case HX_REPORT_COORD_RAWDATA:
+ length = ts->touch_info_size;
+ break;
+ default:
+ I("Neither Normal Nor SMWP error!");
+ ret_val = HX_PATH_FAIL;
+ goto END_FUNCTION;
+ }
+
+ if (ts_path == HX_REPORT_COORD || ts_path == HX_REPORT_COORD_RAWDATA) {
+ for (i = 0; i < length; i++) {
+ /* case 1 EXCEEPTION recovery flow */
+ if (buf[i] == 0xEB) {
+ hx_EB_event++;
+ } else if (buf[i] == 0xEC) {
+ hx_EC_event++;
+ } else if (buf[i] == 0xED) {
+ hx_ED_event++;
+
+ /* case 2 EXCEPTION recovery flow-Disable */
+ } else if (buf[i] == 0x00) {
+ hx_zero_event++;
+ } else {
+ ts->excp_zero_event_count = 0;
+ break;
+ }
+ }
+ }
+
+ if (hx_EB_event == length) {
+ hx_excp_event = length;
+ ts->excp_eb_event_flag++;
+ I("[HIMAX TP MSG]: EXCEPTION event checked - ALL 0xEB.");
+ } else if (hx_EC_event == length) {
+ hx_excp_event = length;
+ ts->excp_ec_event_flag++;
+ I("[HIMAX TP MSG]: EXCEPTION event checked - ALL 0xEC.");
+ } else if (hx_ED_event == length) {
+ hx_excp_event = length;
+ ts->excp_ed_event_flag++;
+ I("[HIMAX TP MSG]: EXCEPTION event checked - ALL 0xED.");
+ }
+
+ if ((hx_excp_event == length || hx_zero_event == length) &&
+ ts->excp_reset_active == 0) {
+ shaking_ret = g_core_fp.fp_ic_excp_recovery(ts,
+ hx_excp_event, hx_zero_event, length);
+
+ if (shaking_ret == HX_EXCP_EVENT) {
+ g_core_fp.fp_read_FW_status(ts);
+ himax_excp_hw_reset(ts);
+ ret_val = HX_EXCP_EVENT;
+ } else if (shaking_ret == HX_ZERO_EVENT_COUNT) {
+ g_core_fp.fp_read_FW_status(ts);
+ ret_val = HX_ZERO_EVENT_COUNT;
+ } else {
+ I("IC is running. Nothing to be done!");
+ ret_val = HX_IC_RUNNING;
+ }
+
+ /* drop 1st interrupts after chip reset */
+ } else if (ts->excp_reset_active) {
+ ts->excp_reset_active = 0;
+ I("Skip by excp_reset_active.");
+ ret_val = HX_EXCP_REC_OK;
+ }
+
+END_FUNCTION:
+
+ return ret_val;
+}
+
+static int himax_err_ctrl(struct himax_ts_data *ts,
+ u8 *buf, int ts_path)
+{
+ int ts_status = HX_CHKSUM_FAIL;
+
+ ts_status = himax_checksum_cal(ts, buf, ts_path);
+ if (ts_status == HX_CHKSUM_FAIL) {
+ goto CHK_FAIL;
+ } else {
+ /* continuous N times record, not total N times. */
+ ts->excp_zero_event_count = 0;
+ goto END_FUNCTION;
+ }
+
+CHK_FAIL:
+ ts_status = himax_ts_event_check(ts, buf, ts_path);
+END_FUNCTION:
+ return ts_status;
+}
+
+/* end error_control*/
+
+static int himax_ts_operation(struct himax_ts_data *ts,
+ int ts_path)
+{
+ int ts_status = HX_TS_NORMAL_END;
+ int ret = 0;
+ u32 offset = 0;
+
+ memset(ts->xfer_buff,
+ 0x00,
+ ts->touch_all_size * sizeof(u8));
+ ts_status = himax_touch_get(ts, ts->xfer_buff, ts_path);
+ if (ts_status == HX_TS_GET_DATA_FAIL)
+ goto END_FUNCTION;
+
+ ts_status = himax_err_ctrl(ts, ts->xfer_buff, ts_path);
+ if (!(ts_status == HX_REPORT_DATA || ts_status == HX_TS_NORMAL_END))
+ goto END_FUNCTION;
+ if (ts->hid_probe) {
+ offset = 0;
+ if (!ts->hid_req_cfg.input_RD_de) {
+ ret = hx_hid_report(ts, ts->xfer_buff + offset + HID_REPORT_HDR_SZ,
+ ts->hid_desc.max_input_length - HID_REPORT_HDR_SZ);
+ }
+ offset += ts->hid_desc.max_input_length;
+ if (ts->ic_data->HX_STYLUS_FUNC) {
+ if (!ts->hid_req_cfg.input_RD_de) {
+ ret += hx_hid_report(ts,
+ ts->xfer_buff + offset + HID_REPORT_HDR_SZ,
+ ts->hid_desc.max_input_length - HID_REPORT_HDR_SZ);
+ }
+ offset += ts->hid_desc.max_input_length;
+ }
+ }
+
+ if (ret != 0)
+ ts_status = HX_TS_GET_DATA_FAIL;
+
+END_FUNCTION:
+ return ts_status;
+}
+
+void himax_cable_detect_func(struct himax_ts_data *ts, bool force_renew)
+{
+ /*u32 connect_status = 0;*/
+ u8 connect_status = 0;
+
+ connect_status = ts->latest_power_status;
+
+ /* I("Touch: cable status=%d, cable_config=%p, usb_connected=%d\n",*/
+ /* connect_status, ts->cable_config, ts->usb_connected); */
+ if (ts->cable_config) {
+ if (connect_status != ts->usb_connected || force_renew) {
+ if (connect_status) {
+ ts->cable_config[1] = 0x01;
+ ts->usb_connected = 0x01;
+ } else {
+ ts->cable_config[1] = 0x00;
+ ts->usb_connected = 0x00;
+ }
+
+ g_core_fp.fp_usb_detect_set(ts, ts->cable_config);
+ I("Cable status change: 0x%2.2X",
+ ts->usb_connected);
+ }
+ }
+}
+
+void himax_ts_work(struct himax_ts_data *ts)
+{
+ int ts_status = HX_TS_NORMAL_END;
+ int ts_path = 0;
+
+ if (ts->notouch_frame > 0) {
+ ts->notouch_frame--;
+ return;
+ }
+
+ himax_cable_detect_func(ts, false);
+
+ ts_path = HX_REPORT_COORD;
+ ts_status = himax_ts_operation(ts, ts_path);
+ if (ts_status == HX_TS_GET_DATA_FAIL) {
+ I("Now reset the Touch chip.");
+ g_core_fp.fp_ic_reset(ts, false, true);
+ }
+}
+
+/*end ts_work*/
+enum hrtimer_restart himax_ts_timer_func(struct hrtimer *timer)
+{
+ struct himax_ts_data *ts;
+
+ ts = container_of(timer, struct himax_ts_data, timer);
+ queue_work(ts->himax_wq, &ts->work);
+ hrtimer_start(&ts->timer, ktime_set(0, 12500000), HRTIMER_MODE_REL);
+
+ return HRTIMER_NORESTART;
+}
+
+static int hx_chk_flash_sts(struct himax_ts_data *ts, u32 size)
+{
+ int rslt = 0;
+ return rslt;
+}
+
+static int hx_hid_rd_init(struct himax_ts_data *ts)
+{
+ int ret = 0;
+ const u32 x_num = ts->ic_data->HX_RX_NUM;
+ const u32 y_num = ts->ic_data->HX_TX_NUM;
+ unsigned int raw_data_sz = (x_num * y_num + x_num + y_num) * 2 + 4;
+ u32 rd_sz = 0;
+
+ if (ts->hid_req_cfg.input_RD_de == 0)
+ rd_sz = ts->hid_desc.report_desc_length + host_ext_report_desc_sz;
+ else
+ rd_sz = host_heatmap_report_desc_sz + host_ext_report_desc_sz;
+
+ if (FLASH_VER_GET_VAL(addr_hid_rd_desc) != 0) {
+ if (ts->hid_rd_data.rd_data &&
+ rd_sz != ts->hid_rd_data.rd_length) {
+ kfree(ts->hid_rd_data.rd_data);
+ ts->hid_rd_data.rd_data = NULL;
+ }
+
+ if (!ts->hid_rd_data.rd_data)
+ ts->hid_rd_data.rd_data = kzalloc(rd_sz, GFP_KERNEL);
+
+ if (ts->hid_rd_data.rd_data) {
+ if (ts->hid_req_cfg.input_RD_de == 0) {
+ memcpy((void *)ts->hid_rd_data.rd_data,
+ &ts->hxfw->data[FLASH_VER_GET_VAL(addr_hid_rd_desc)],
+ ts->hid_desc.report_desc_length);
+ ts->hid_rd_data.rd_length = ts->hid_desc.report_desc_length;
+ } else {
+ memcpy((void *)ts->hid_rd_data.rd_data,
+ g_heatmap_rd.host_report_descriptor,
+ host_heatmap_report_desc_sz);
+ ts->hid_rd_data.rd_length = host_heatmap_report_desc_sz;
+ }
+ I("Re-assign HID DIAG size: original = %d, new = %d",
+ le16_to_cpu(g_host_ext_rd.rd_struct.monitor.report_cnt),
+ raw_data_sz);
+ g_host_ext_rd.rd_struct.monitor.report_cnt = cpu_to_le16(raw_data_sz);
+ memcpy((void *)(ts->hid_rd_data.rd_data + ts->hid_rd_data.rd_length),
+ &g_host_ext_rd.host_report_descriptor, host_ext_report_desc_sz);
+ ts->hid_rd_data.rd_length += host_ext_report_desc_sz;
+ } else {
+ E("hid rd data alloc fail");
+ ret = -ENOMEM;
+ }
+ }
+
+ return ret;
+}
+
+static void hx_hid_register(struct himax_ts_data *ts)
+{
+ if (ts->hid_probe) {
+ hid_destroy_device(ts->hid);
+ ts->hid = NULL;
+ ts->hid_probe = false;
+ }
+
+ if (hx_hid_probe(ts) != 0) {
+ E("hid probe fail");
+ ts->hid_probe = false;
+ } else {
+ I("hid probe success");
+ ts->hid_probe = true;
+ }
+}
+
+static int hx_hid_report_data_init(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ ts->touch_info_size = ts->hid_desc.max_input_length;
+ I("base touch_info_size = %d", ts->touch_info_size);
+ if (ts->ic_data->HX_STYLUS_FUNC) {
+ ts->touch_info_size += ts->hid_desc.max_input_length;
+ I("include stylus touch_info_size = %d", ts->touch_info_size);
+ }
+ ts->touch_all_size = ts->touch_info_size;
+
+ if (himax_report_data_init(ts) != 0) {
+ E("report data init fail");
+ ret = -ENOMEM;
+ }
+
+ return ret;
+}
+
+static void himax_boot_upgrade(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_boot_upgrade.work);
+
+ I("Entering");
+ ts->ic_boot_done = false;
+
+ if (hx_chk_flash_sts(ts, ts->ic_data->flash_size) == 1) {
+ E("check flash fail, please upgrade FW");
+ goto END;
+ } else {
+ g_core_fp.fp_reload_disable(ts, 0);
+ g_core_fp.fp_power_on_init(ts);
+ g_core_fp.fp_read_FW_ver(ts);
+ g_core_fp.fp_tp_info_check(ts);
+ }
+END:
+ ts->ic_boot_done = true;
+ himax_int_enable(ts, true);
+
+}
+
+static void hx_hid_update(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_hid_update.work);
+
+ himax_int_enable(ts, false);
+
+ if (ts->hid_req_cfg.input_RD_de == 0) {
+ himax_boot_upgrade(&ts->work_boot_upgrade.work);
+ } else {
+ if (hx_hid_rd_init(ts) == 0) {
+ I("hid rd init success");
+ hx_hid_register(ts);
+ if (ts->hid_probe)
+ hx_hid_report_data_init(ts);
+ }
+ himax_int_enable(ts, true);
+ }
+}
+
+int himax_report_data_init(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ kfree(ts->hx_rawdata_buf);
+ ts->hx_rawdata_buf = NULL;
+
+ ts->hx_rawdata_buf = kzalloc(ts->touch_info_size, GFP_KERNEL);
+ if (!ts->hx_rawdata_buf) {
+ E("ts->hx_rawdata_buf kzalloc failed!");
+ ret = -ENOMEM;
+ goto fail_1;
+ }
+
+ return 0;
+fail_1:
+
+ return ret;
+}
+
+static void himax_report_data_deinit(struct himax_ts_data *ts)
+{
+ kfree(ts->hx_rawdata_buf);
+ ts->hx_rawdata_buf = NULL;
+}
+
+
+static int himax_chip_suspend(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ if (ts->suspended) {
+ I("Already suspended, skip...");
+ goto END;
+ } else {
+ ts->suspended = true;
+ }
+
+ I("enter");
+ g_core_fp.fp_suspend_proc(ts, ts->suspended);
+
+ himax_int_enable(ts, false);
+
+ if (!ts->use_irq) {
+ s32 cancel_state;
+
+ cancel_state = cancel_work_sync(&ts->work);
+ if (cancel_state)
+ himax_int_enable(ts, true);
+ }
+
+ atomic_set(&ts->suspend_mode, 1);
+
+ if (ts->pdata) {
+ if (ts->pdata->power_off_3v3) {
+ if (ts->pdata->vcca_supply)
+ ret = regulator_disable(ts->pdata->vcca_supply);
+ }
+ }
+
+END:
+ hx_hid_remove(ts);
+ I("END");
+
+ return ret;
+}
+
+static int himax_chip_resume(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ if (!ts->suspended && ts->resume_success) {
+ I("Already resumed, skip...");
+ goto END;
+ } else {
+ ts->suspended = false;
+ }
+ ts->resume_success = false;
+
+ I("enter");
+ /* continuous N times record, not total N times. */
+ ts->excp_zero_event_count = 0;
+
+ atomic_set(&ts->suspend_mode, 0);
+ if (ts->pdata) {
+ if (ts->pdata->power_off_3v3) {
+ if (ts->pdata->vcca_supply)
+ ret = regulator_enable(ts->pdata->vcca_supply);
+ }
+ }
+
+ g_core_fp.fp_resume_proc(ts, ts->suspended);
+ // hx_report_all_leave_event(ts);
+ if (ts->resume_success) {
+ hx_hid_probe(ts);
+ himax_int_enable(ts, true);
+ } else {
+ E("resume failed!");
+ ret = -ECANCELED;
+ }
+END:
+ I("END");
+
+ return ret;
+}
+
+int himax_suspend(struct device *dev)
+{
+ struct himax_ts_data *ts = dev_get_drvdata(dev);
+
+ I("enter");
+ if (!ts->initialized) {
+ E("init not ready, skip!");
+ return -ECANCELED;
+ }
+ himax_chip_suspend(ts);
+ return 0;
+}
+
+int himax_resume(struct device *dev)
+{
+ int ret = 0;
+ struct himax_ts_data *ts = dev_get_drvdata(dev);
+
+ I("enter");
+ /*
+ * wait until device resume for TDDI
+ * TDDI: Touch and display Driver IC
+ */
+ if (!ts->initialized) {
+#if !defined(CONFIG_FB)
+ if (himax_chip_init(ts))
+ return -ECANCELED;
+#else
+ E("init not ready, skip!");
+ return -ECANCELED;
+#endif
+ }
+ ret = himax_chip_resume(ts);
+ if (ret < 0) {
+ E("resume failed!");
+ I("retry resume");
+ schedule_delayed_work(&ts->work_resume_delayed_work,
+ msecs_to_jiffies(ts->pdata->ic_resume_delay));
+ // I("try int rescue");
+ // himax_int_enable(ts, 1);
+ }
+
+ return ret;
+}
+
+static void himax_resume_work_func(struct work_struct *work)
+{
+ struct himax_ts_data *ts = NULL;
+
+ ts = container_of(work, struct himax_ts_data,
+ work_resume_delayed_work.work);
+ if (!ts) {
+ E("ts is NULL");
+ return;
+ }
+ himax_chip_resume(ts);
+}
+
+#if defined(CONFIG_PM_SLEEP)
+static const struct dev_pm_ops hx_hid_pm = {
+ .suspend = himax_suspend,
+ .resume = himax_resume,
+ .restore = himax_resume,
+};
+
+#define HX_HID_PM (&hx_hid_pm)
+#else
+#define HX_HID_PM NULL
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id himax_match_table[] = {
+ { .compatible = "himax,hx83102j" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, himax_match_table);
+#define himax_match_table of_match_ptr(himax_match_table)
+#else
+#define himax_match_table NULL
+#endif
+
+
+#define hx_acpi_spi_table NULL
+
+
+int himax_chip_init(struct himax_ts_data *ts)
+{
+ int err = PROBE_FAIL;
+ struct himax_platform_data *pdata = ts->pdata;
+
+ ts->chip_max_dsram_size = 0;
+ ts->notouch_frame = 0;
+ ts->ic_notouch_frame = 0;
+
+ if (g_core_fp.fp_chip_init) {
+ g_core_fp.fp_chip_init(ts);
+ } else {
+ E("function point of chip_init is NULL!");
+ goto error_ic_init_failed;
+ }
+ g_core_fp.fp_touch_information(ts);
+
+ spin_lock_init(&ts->irq_lock);
+
+ if (himax_ts_register_interrupt(ts)) {
+ E("register interrupt failed");
+ goto err_register_interrupt_failed;
+ }
+
+ himax_int_enable(ts, false);
+
+ ts->himax_hid_debug_wq =
+ create_singlethread_workqueue("HX_hid_debug");
+ if (!ts->himax_hid_debug_wq) {
+ E("allocate himax_hid_debug_wq failed");
+ err = -ENOMEM;
+ goto err_hid_debug_wq_failed;
+ }
+ INIT_DELAYED_WORK(&ts->work_hid_update, hx_hid_update);
+
+ ts->himax_resume_delayed_work_wq =
+ create_singlethread_workqueue("HX_resume_delayed_work");
+ if (!ts->himax_resume_delayed_work_wq) {
+ E("allocate himax_resume_delayed_work_wq failed");
+ err = -ENOMEM;
+ goto err_resume_delayed_work_wq_failed;
+ }
+ INIT_DELAYED_WORK(&ts->work_resume_delayed_work, himax_resume_work_func);
+
+ g_core_fp.fp_calc_touch_data_size(ts);
+
+#if defined(CONFIG_OF)
+ pdata->cable_config[0] = 0xF0;
+ pdata->cable_config[1] = 0x00;
+#endif
+
+ ts->suspended = false;
+ ts->usb_connected = 0x00;
+ ts->cable_config = pdata->cable_config;
+ ts->initialized = true;
+ return 0;
+
+err_resume_delayed_work_wq_failed:
+ destroy_workqueue(ts->himax_hid_debug_wq);
+err_hid_debug_wq_failed:
+ himax_ts_unregister_interrupt(ts);
+err_register_interrupt_failed:
+error_ic_init_failed:
+ ts->probe_fail_flag = 1;
+ return err;
+}
+
+static void himax_chip_deinit(struct himax_ts_data *ts)
+{
+ kfree(ts->zf_update_cfg_buffer);
+ ts->zf_update_cfg_buffer = NULL;
+
+ himax_ts_unregister_interrupt(ts);
+
+ himax_report_data_deinit(ts);
+
+ cancel_delayed_work_sync(&ts->work_resume_delayed_work);
+ destroy_workqueue(ts->himax_resume_delayed_work_wq);
+ destroy_workqueue(ts->himax_hid_debug_wq);
+
+ ts->probe_fail_flag = 0;
+
+ I("Common section deinited!");
+}
+
+static void himax_platform_deinit(struct himax_ts_data *ts)
+{
+ struct himax_platform_data *pdata = NULL;
+
+ I("entering");
+
+ if (!ts) {
+ E("ts is NULL");
+ return;
+ }
+
+ pdata = ts->pdata;
+ if (!pdata) {
+ E("pdata is NULL");
+ return;
+ }
+
+ himax_gpio_power_deconfig(pdata);
+
+ kfree(ts->ic_data);
+ ts->ic_data = NULL;
+
+ kfree(pdata);
+ pdata = NULL;
+ ts->pdata = NULL;
+
+ kfree(ts->xfer_buff);
+ ts->xfer_buff = NULL;
+
+ I("exit");
+}
+
+static bool himax_platform_init(struct himax_ts_data *ts,
+ struct himax_platform_data *local_pdata)
+{
+ struct himax_platform_data *pdata;
+
+ I("entering");
+ ts->xfer_buff = kcalloc
+ (HX_FULL_STACK_RAWDATA_SIZE, sizeof(u8), GFP_KERNEL);
+ if (!ts->xfer_buff) {
+ E("xfer_buff alloc fail, exit!");
+ goto err_xfer_buff_fail;
+ }
+
+ I("PDATA START");
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) { /*Allocate Platform data space*/
+ E("pdata alloc fail, exit!");
+ goto err_dt_platform_data_fail;
+ }
+
+ I("ts->ic_data START");
+ ts->ic_data = kzalloc(sizeof(*ts->ic_data), GFP_KERNEL);
+ if (!ts->ic_data) { /*Allocate IC data space*/
+ E("ic_data alloc fail, exit!");
+ goto err_dt_ic_data_fail;
+ }
+ memset(ts->ic_data, 0xFF, sizeof(struct himax_ic_data));
+ /* default 128k, different size please follow HX83121A style */
+ ts->ic_data->flash_size = 131072;
+
+ memcpy(pdata, local_pdata, sizeof(struct himax_platform_data));
+ ts->pdata = pdata;
+ pdata->ts = ts;
+ ts->rst_gpio = pdata->gpio_reset;
+
+ if (himax_gpio_power_config(ts, pdata) < 0) {
+ E("gpio config fail, exit!");
+ goto err_power_config_failed;
+ }
+
+ I("Completed.");
+
+ return true;
+
+err_power_config_failed:
+ kfree(ts->ic_data);
+ ts->ic_data = NULL;
+err_dt_ic_data_fail:
+ kfree(pdata);
+ pdata = NULL;
+err_dt_platform_data_fail:
+ kfree(ts->xfer_buff);
+ ts->xfer_buff = NULL;
+err_xfer_buff_fail:
+ return false;
+}
+
+static struct himax_ts_data *get_ts(struct device *dev)
+{
+ struct list_head *listptr = NULL;
+ struct himax_ts_data *ts = NULL;
+ struct himax_ts_data *tmp_ts = NULL;
+
+ if (!g_himax_ts->dev ||
+ g_himax_ts->dev == dev) {
+ D("Found 1st device : %p", dev);
+ return g_himax_ts;
+ }
+
+ D("Matching for device %p", dev);
+ list_for_each(listptr, &g_himax_ts->list) {
+ tmp_ts = list_entry(listptr, struct himax_ts_data, list);
+ if (tmp_ts->dev == dev) {
+ ts = tmp_ts;
+ break;
+ }
+ }
+ if (!ts)
+ D("No matching device found");
+
+ return ts;
+}
+
+static int himax_parse_dt(struct device_node *dt, struct himax_platform_data *pdata)
+{
+ /* pid_fw_name size = length of default_fw_name + length of "_XXXX" +
+ * length of ".bin" + null terminator.
+ */
+ static char pid_fw_name[ARRAY_SIZE(default_fw_name) + 5 + 4 + 1] = {0};
+ int tmp = 0;
+ const int pid_prop_args = 2;
+ u32 data = 0;
+ int id_gpios[8] = {0};
+ int counter = 0;
+ int i = 0;
+ s16 id_value = -1;
+ int dts_irq = 0;
+ int err = 0;
+
+ UNUSED(default_fw_name);
+ if (!dt || !pdata) {
+ E("DT: dev or pdata is NULL");
+ return -EINVAL;
+ }
+
+ dts_irq = of_irq_get(dt, 0);
+ D("DT: dts_irq = %d", dts_irq);
+ if (dts_irq <= 0) {
+ if (dts_irq == -EPROBE_DEFER)
+ E("DT: dts_irq = -EPROBE_DEFER");
+ return -EIO;
+ }
+
+ pdata->of_irq = dts_irq;
+ pdata->gpio_irq = -1;
+
+ pdata->gpio_reset = of_get_named_gpio(dt, "reset-gpios", 0);
+ if (!gpio_is_valid(pdata->gpio_reset)) {
+ I(" DT:gpio-rst value is not valid");
+ return -EIO;
+ }
+
+ I(" DT:interrupt=%d, reset=%d",
+ pdata->of_irq, pdata->gpio_reset);
+ counter = gpiod_count(pdata->ts->dev, "himax,id");
+ if (counter > 0) {
+ for (i = 0 ; i < counter ; i++) {
+ id_gpios[i] = of_get_named_gpio(dt, "himax,id-gpios", i);
+ if (!gpio_is_valid(id_gpios[i])) {
+ I(" DT:gpio-id value is not valid");
+ return -EIO;
+ }
+ I(" DT:gpio-id[%d]=%d", i, id_gpios[i]);
+ }
+ id_value = 0;
+ for (i = 0 ; i < counter ; i++) {
+ gpio_direction_input(id_gpios[i]);
+ id_value |= gpio_get_value(id_gpios[i]) << i;
+ }
+ I(" DT:gpio-id value=%04X", id_value);
+ pdata->panel_id = id_value;
+ } else {
+ pdata->panel_id = -1;
+ D(" DT:gpio-id not found");
+ }
+
+ // himax,ic_det_delay unit is millisecond
+ if (of_property_read_u32(dt, "himax,ic-det-delay-ms", &data)) {
+ pdata->ic_det_delay = 0;
+ D(" DT:himax,ic-det-delay-ms not found");
+ } else {
+ pdata->ic_det_delay = data;
+ I(" DT:himax,ic-det-delay-ms=%d", pdata->ic_det_delay);
+ }
+
+ // himax,ic_resume_delay unit is millisecond
+ if (of_property_read_u32(dt, "himax,ic-resume-delay-ms", &data)) {
+ pdata->ic_resume_delay = 0;
+ D(" DT:himax,ic-resume-delay-ms not found");
+ } else {
+ pdata->ic_resume_delay = data;
+ I(" DT:himax,ic-resume-delay-ms=%d", pdata->ic_resume_delay);
+ }
+
+ if (of_property_read_bool(dt, "himax,has-flash")) {
+ pdata->is_zf = false;
+ D(" DT:himax,has-flash");
+ } else {
+ pdata->is_zf = true;
+ I(" DT:himax,has-flash not found, load firmware from file");
+ }
+
+ if (of_property_read_bool(dt, "vccd-supply")) {
+ pdata->vccd_supply = regulator_get(pdata->ts->dev, "vccd");
+ if (IS_ERR(pdata->vccd_supply)) {
+ E(" DT:failed to get vccd supply");
+ err = PTR_ERR(pdata->vccd_supply);
+ pdata->vccd_supply = NULL;
+ return err;
+ }
+ I(" DT:vccd-supply=%p", pdata->vccd_supply);
+ } else {
+ pdata->vccd_supply = NULL;
+ }
+
+ if (of_property_read_bool(dt, "vcca-supply")) {
+ pdata->vcca_supply = regulator_get(pdata->ts->dev, "vcca");
+ if (IS_ERR(pdata->vcca_supply)) {
+ E(" DT:failed to get vcca supply");
+ err = PTR_ERR(pdata->vcca_supply);
+ pdata->vcca_supply = NULL;
+ return err;
+ }
+ I(" DT:vcca-supply=%p", pdata->vcca_supply);
+ } else {
+ pdata->vcca_supply = NULL;
+ }
+
+ /*
+ * check himax,pid first, if exist then check if it is single.
+ * Single case: himax,pid = <0x1002>; // 0x1002 is pid value
+ * Multiple case: himax,pid = <id_value0 00x1001>, <id_value1 0x1002>;
+ * When id_value >= 0, check the mapping listed to use the pid value.
+ */
+ if (of_get_property(dt, "himax,pid", &data)) {
+ counter = data / (sizeof(u32) * pid_prop_args);
+
+ if (!counter) {
+ // default case, no id->pid mappings
+ if (of_property_read_u32(dt, "himax,pid", &data)) {
+ pdata->pid = 0;
+ D(" DT:himax,pid not found");
+ goto GET_PID_END;
+ } else {
+ goto GET_PID_VALUE;
+ }
+ }
+
+ if (id_value < 0) {
+ E(" DT:himax,pid has no matched for id_value=%04X", id_value);
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+ for (i = 0; i < counter; i++) {
+ if (of_property_read_u32_index(dt, "himax,pid",
+ i * pid_prop_args, &tmp)) {
+ D(" DT:himax,pid parsing error!");
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+ if (of_property_read_u32_index(dt, "himax,pid",
+ i * pid_prop_args + 1, &data)) {
+ D(" DT:himax,pid parsing error!");
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+ if (tmp == id_value) {
+ I(" DT:himax,pid mapping: id=%04X => pid=%04X, matched!",
+ tmp, data);
+ i = counter;
+ } else {
+ I(" DT:himax,pid mapping: id=%04X => pid=%04X", tmp, data);
+ }
+ }
+
+ if (counter == i) {
+ E(" DT:himax,pid has no matched for id_value=%04X", id_value);
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+GET_PID_VALUE:
+ g_fw_boot_upgrade_name = pid_fw_name;
+ pdata->pid = data;
+ snprintf(pid_fw_name, sizeof(pid_fw_name), "%s_%04X%s",
+ BOOT_UPGRADE_FWNAME, pdata->pid, ".bin");
+ I(" DT:himax,pid=%04X, fw_name=%s",
+ pdata->pid, pid_fw_name);
+ } else {
+ pdata->pid = 0;
+ D(" DT:himax,pid not found");
+ }
+GET_PID_END:
+
+ return 0;
+}
+
+
+static int himax_spi_drv_probe(struct spi_device *spi)
+{
+ struct himax_ts_data *ts = NULL;
+ int ret = 0;
+ bool bret = false;
+ static struct himax_platform_data pdata = {0};
+#if defined(CONFIG_HID_HIMAX)
+ struct time_var current_time;
+#endif
+
+ ts = get_ts(&spi->dev);
+ if (!ts) {
+ // non exist, create new one
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts) {
+ E("allocate himax_ts_data failed");
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+ list_add_tail(&ts->list, &g_himax_ts->list);
+ I("Allocated himax_ts_data for new device %p", &spi->dev);
+ ts->dev = &spi->dev;
+ }
+ if (ts == g_himax_ts)
+ ts->dev = &spi->dev;
+#if defined(CONFIG_HID_HIMAX)
+ if ((ts->deferred_start.tv_sec != 0 ||
+ ts->deferred_start.tv_nsec != 0) && ts->ic_det_delay) {
+ time_func(¤t_time);
+ if (time_diff(&ts->deferred_start, ¤t_time) <
+ ts->ic_det_delay) {
+ D("delay time not reach, defer probe");
+ return -EPROBE_DEFER;
+ }
+ I("delay time reach, probe again!");
+ }
+#endif
+ D("Enter");
+ if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) {
+ E("Full duplex not supported by host");
+ return -EIO;
+ }
+ pdata.ts = ts;
+ ts->dev = &spi->dev;
+
+#if defined(CONFIG_OF)
+ if (himax_parse_dt(spi->dev.of_node, &pdata) < 0) {
+ E(" parse OF data failed!");
+ if (ts != g_himax_ts) {
+ list_del(&ts->list);
+ kfree(ts);
+ D("free ts %p of dev %p", ts, &spi->dev);
+ } else {
+ ts->dev = NULL;
+ }
+ return -ENODEV;
+ }
+#endif
+
+#if defined(CONFIG_HID_HIMAX)
+ if (pdata.ic_det_delay > 0) {
+ if (ts->deferred_start.tv_sec == 0 &&
+ ts->deferred_start.tv_nsec == 0) {
+ I("delay %d ms for IC detect",
+ pdata.ic_det_delay);
+ ts->ic_det_delay = pdata.ic_det_delay;
+ time_func(&ts->deferred_start);
+ return -EPROBE_DEFER;
+ }
+ }
+#endif
+
+ ts->xfer_data = kzalloc(BUS_RW_MAX_LEN, GFP_KERNEL);
+ if (!ts->xfer_data) {
+ E("allocate xfer_data failed");
+ ret = -ENOMEM;
+ goto err_alloc_xfer_data_failed;
+ }
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_3;
+ spi->chip_select = 0;
+
+ ts->spi = spi;
+ mutex_init(&ts->rw_lock);
+ mutex_init(&ts->reg_lock);
+ mutex_init(&ts->hid_ioctl_lock);
+ dev_set_drvdata(&spi->dev, ts);
+ spi_set_drvdata(spi, ts);
+
+ ts->probe_finish = false;
+ ts->initialized = false;
+ ts->ic_boot_done = false;
+ bret = himax_platform_init(ts, &pdata);
+ if (!bret) {
+ E("platform init failed");
+ ret = -ENODEV;
+ goto error_platform_init_failed;
+ }
+ ts->ic_data->has_flash = !pdata.is_zf;
+
+ bret = g_core_fp.fp_chip_detect(ts);
+ if (!bret) {
+ E("IC detect failed");
+ ret = -ENODEV;
+ goto error_ic_detect_failed;
+ }
+
+ ret = himax_chip_init(ts);
+ if (ret < 0)
+ goto err_init_failed;
+
+#if defined(CONFIG_FB)
+ ts->himax_att_wq = create_singlethread_workqueue("HMX_ATT_request");
+ if (!ts->himax_att_wq) {
+ E(" allocate himax_att_wq failed");
+ ret = -ENOMEM;
+ goto err_get_intr_bit_failed;
+ }
+
+ INIT_DELAYED_WORK(&ts->work_att, himax_fb_register);
+ queue_delayed_work(ts->himax_att_wq, &ts->work_att,
+ msecs_to_jiffies(0));
+#endif
+
+ ts->himax_pwr_wq = create_singlethread_workqueue("HMX_PWR_request");
+ if (!ts->himax_pwr_wq) {
+ E(" allocate himax_pwr_wq failed");
+ ret = -ENOMEM;
+ goto err_create_pwr_wq_failed;
+ }
+
+ INIT_DELAYED_WORK(&ts->work_pwr, himax_pwr_register);
+ queue_delayed_work(ts->himax_pwr_wq, &ts->work_pwr,
+ msecs_to_jiffies(0));
+
+ ts->probe_finish = true;
+ I("%s, End\n", __func__);
+ return ret;
+
+err_create_pwr_wq_failed:
+#if defined(CONFIG_FB)
+ cancel_delayed_work_sync(&ts->work_att);
+ destroy_workqueue(ts->himax_att_wq);
+err_get_intr_bit_failed:
+#endif
+ himax_chip_deinit(ts);
+err_init_failed:
+error_ic_detect_failed:
+ himax_platform_deinit(ts);
+error_platform_init_failed:
+ kfree(ts->xfer_data);
+ ts->xfer_data = NULL;
+err_alloc_xfer_data_failed:
+ if (ts != g_himax_ts)
+ list_del(&ts->list);
+ kfree(ts);
+ ts = NULL;
+err_alloc_data_failed:
+
+ return ret;
+}
+
+static void himax_spi_drv_remove(struct spi_device *spi)
+{
+ struct himax_ts_data *ts = spi_get_drvdata(spi);
+
+ if (ts->probe_finish) {
+ if (ts->ic_boot_done) {
+ himax_int_enable(ts, false);
+
+ if (ts->hid_probe) {
+ hx_hid_remove(ts);
+ ts->hid_probe = false;
+ }
+
+ kfree(ts->hid_rd_data.rd_data);
+ ts->hid_rd_data.rd_data = NULL;
+
+ ts->ic_boot_done = false;
+ }
+ power_supply_unreg_notifier(&ts->power_notif);
+ cancel_delayed_work_sync(&ts->work_pwr);
+ destroy_workqueue(ts->himax_pwr_wq);
+ #if defined(CONFIG_FB)
+ if (fb_unregister_client(&ts->fb_notif))
+ E("Err occur while unregister fb_noti.");
+ cancel_delayed_work_sync(&ts->work_att);
+ destroy_workqueue(ts->himax_att_wq);
+ #endif
+ himax_chip_deinit(ts);
+ himax_platform_deinit(ts);
+ ts->pdata = NULL;
+ kfree(ts->ovl_idx);
+ ts->ovl_idx = NULL;
+ kfree(ts->xfer_data);
+ ts->xfer_data = NULL;
+ ts->probe_fail_flag = 0;
+ if (ts != g_himax_ts) {
+ list_del(&ts->list);
+ kfree(ts);
+ ts = NULL;
+ }
+ }
+ spi_set_drvdata(spi, NULL);
+ I("completed.");
+}
+
+static void print_config(void)
+{
+#if !defined(CONFIG_HID_HIMAX)
+ D("Himax module defined.");
+#endif
+#if defined(CONFIG_DRM_ROCKCHIP)
+ D("CONFIG_DRM_ROCKCHIP defined.");
+#endif
+#if defined(CONFIG_FB)
+ D("CONFIG_FB defined.");
+#endif
+#if defined(CONFIG_OF)
+ D("CONFIG_OF defined.");
+#endif
+#if defined(BUS_R_DLEN)
+ D("BUS_R_DLEN defined : %d.", BUS_R_DLEN);
+#endif
+#if defined(BUS_W_DLEN)
+ D("BUS_W_DLEN defined : %d.", BUS_W_DLEN);
+#endif
+#if defined(BOOT_UPGRADE_FWNAME)
+ D("BOOT_UPGRADE_FWNAME defined : %s.", BOOT_UPGRADE_FWNAME);
+#endif
+#if defined(HIMAX_DRIVER_VER)
+ D("HIMAX_DRIVER_VER defined : %s.", HIMAX_DRIVER_VER);
+#endif
+#if defined(HX_HID_PM)
+ D("HX_HID_PM defined.");
+#endif
+}
+static struct spi_driver himax_hid_over_spi_driver = {
+ .driver = {
+ .name = himax_dev_name,
+ .owner = THIS_MODULE,
+ .pm = HX_HID_PM,
+ .of_match_table = himax_match_table,
+ .acpi_match_table = hx_acpi_spi_table,
+ },
+ .probe = himax_spi_drv_probe,
+ .remove = himax_spi_drv_remove,
+};
+void himax_spi_drv_exit(void)
+{
+ if (g_himax_ts) {
+ spi_unregister_driver(&himax_hid_over_spi_driver);
+ kfree(g_himax_ts);
+ g_himax_ts = NULL;
+ I("Free g_himax_ts");
+ }
+}
+
+static int himax_spi_drv_init(struct himax_ts_data *ts)
+{
+ int ret;
+
+ I("Himax touch panel driver for HID init");
+ print_config();
+ ret = spi_register_driver(&himax_hid_over_spi_driver);
+
+ return ret;
+}
+
+static int __init himax_ic_init(void)
+{
+ int ret = 0;
+ // set default regs
+ himax_ic_reg_init(&g_core_regs);
+ himax_ic_fp_init();
+ // basic struct init
+ g_himax_ts = kzalloc(sizeof(*g_himax_ts), GFP_KERNEL);
+ if (!g_himax_ts) {
+ E("allocate himax_ts_data failed");
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+ INIT_LIST_HEAD(&g_himax_ts->list);
+ // init ic specific params
+ himax_para_init(g_himax_ts);
+
+ // add to ic module list
+ ret = himax_spi_drv_init(g_himax_ts);
+ if (ret) {
+ E("himax_spi_drv_init failed");
+ kfree(g_himax_ts);
+ g_himax_ts = NULL;
+ }
+
+err_alloc_data_failed:
+ return ret;
+}
+
+static void __exit himax_ic_exit(void)
+{
+ himax_spi_drv_exit();
+}
+
+#if !defined(CONFIG_HID_HIMAX)
+module_init(himax_ic_init);
+#else
+late_initcall(himax_ic_init);
+#endif
+module_exit(himax_ic_exit);
+
+MODULE_DESCRIPTION("Himax SPI driver for HID simulator for " HX83102J_ID);
+MODULE_AUTHOR("Himax, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HIMAX_DRIVER_VER);
diff --git a/drivers/hid/hid-himax-83102j.h b/drivers/hid/hid-himax-83102j.h
new file mode 100644
index 000000000000..41e4c9577fe5
--- /dev/null
+++ b/drivers/hid/hid-himax-83102j.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __HX_IC_83102J_H__
+#define __HX_IC_83102J_H__
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/spi/spi.h>
+#include <linux/hid.h>
+#include <linux/sizes.h>
+#include <linux/fs.h>
+#include <linux/gpio.h>
+#include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/proc_fs.h>
+#include <linux/firmware.h>
+#include <linux/stddef.h>
+#include <linux/power_supply.h>
+
+#define HIMAX_DRIVER_VER "1.0.0"
+
+#define HIMAX_BUS_RETRY_TIMES 3
+#define BUS_RW_MAX_LEN 0x20006
+#define BUS_R_HLEN 3
+#define BUS_R_DLEN ((BUS_RW_MAX_LEN - BUS_R_HLEN) - ((BUS_RW_MAX_LEN - BUS_R_HLEN) % 4))
+#define BUS_W_HLEN 2
+#define BUS_W_DLEN ((BUS_RW_MAX_LEN - BUS_W_HLEN) - ((BUS_RW_MAX_LEN - BUS_W_HLEN) % 4))
+#define FIX_HX_INT_IS_EDGE (false)
+
+#define HX_DELAY_BOOT_UPDATE (2000)
+#define HID_REG_SZ_MAX (1 + 4 + 1 + 4 + 256)
+
+enum HID_ID_FUNCT {
+ ID_CONTACT_COUNT = 0x03,
+};
+
+#define HID_RAW_DATA_TYPE_DELTA (0x09)
+#define HID_RAW_DATA_TYPE_RAW (0x0A)
+#define HID_RAW_DATA_TYPE_BASELINE (0x0B)
+#define HID_RAW_DATA_TYPE_NORMAL (0x00)
+
+enum HID_FW_UPDATE_STATUS_CODE {
+ FWUP_ERROR_NO_ERROR = 0x77,
+ FWUP_ERROR_MCU_00 = 0x00,
+ FWUP_ERROR_MCU_A0 = 0xA0,
+ FWUP_ERROR_NO_BL = 0xC1,
+ FWUP_ERROR_NO_MAIN = 0xC2,
+ FWUP_ERROR_BL_COMPLETE = 0xB1,
+ FWUP_ERROR_BL = 0xB2,
+ FWUP_ERROR_PW = 0xB3,
+ FWUP_ERROR_ERASE_FLASH = 0xB4,
+ FWUP_ERROR_FLASH_PROGRAMMING = 0xB5,
+ FWUP_ERROR_NO_DEVICE = 0xFFFFFF00,
+ FWUP_ERROR_LOAD_FW_BIN = 0xFFFFFF01,
+ FWUP_ERROR_INITIAL = 0xFFFFFF02,
+ FWUP_ERROR_POLLING_TIMEOUT = 0xFFFFFF03,
+ FWUP_ERROR_FW_TRANSFER = 0xFFFFFF04
+};
+
+struct himax_ts_data;
+union host_ext_rd_t;
+union heatmap_rd_t;
+
+#define HID_FW_UPDATE_BL_CMD (0x77)
+#define HID_FW_UPDATE_MAIN_CMD (0x55)
+
+int hx_hid_probe(struct himax_ts_data *ts);
+void hx_hid_remove(struct himax_ts_data *ts);
+
+void hx_hid_update_info(struct himax_ts_data *ts);
+int hx_hid_report(const struct himax_ts_data *ts, u8 *data, s32 len);
+
+enum fix_touch_info {
+ FIX_HX_RX_NUM = 48,
+ FIX_HX_TX_NUM = 32,
+ FIX_HX_BT_NUM = 0,
+ FIX_HX_MAX_PT = 10,
+ FIX_HX_STYLUS_FUNC = 1,
+ FIX_HX_STYLUS_ID_V2 = 0,
+ FIX_HX_STYLUS_RATIO = 1,
+ HX_STACK_ORG_LEN = 128
+};
+
+#define himax_dev_name "hx_spi_hid_tp"
+
+#if defined(CONFIG_FB)
+#include <linux/notifier.h>
+#include <linux/fb.h>
+#endif
+
+/* log macro */
+#define I(fmt, arg...) pr_info("[HXTP][%s]: " fmt "\n", __func__, ##arg)
+#define W(fmt, arg...) pr_warn("[HXTP][WARNING][%s]: " fmt "\n", __func__, ##arg)
+#define E(fmt, arg...) pr_err("[HXTP][ERROR][%s]: " fmt "\n", __func__, ##arg)
+#define D(fmt, arg...) pr_debug("[HXTP][DEBUG][%s]: " fmt "\n", __func__, ##arg)
+
+#define himax_dev_name "hx_spi_hid_tp"
+
+#define BOOT_UPGRADE_FWNAME "himax_i2chid"
+
+#define MPAP_FWNAME "himax_mpfw.bin"
+
+#define UNUSED(x) ((void)(x))
+static const char default_fw_name[] = BOOT_UPGRADE_FWNAME;
+
+#define DATA_LEN_4 4
+#define ADDR_LEN_4 4
+#define MAX_I2C_TRANS_SZ 128
+#define HIMAX_REG_RETRY_TIMES 5
+#define FW_PAGE_SZ 128
+#define HX1K 0x400
+#define HX_48K_SZ 0xC000
+#define HX64K 0x10000
+
+#define HX_RW_REG_FAIL (-1)
+
+#define hx83102j_fw_addr_raw_out_sel 0x100072EC
+#define hx83102j_ic_adr_tcon_rst 0x80020004
+#define hx83102j_data_adc_num 400 /* 200x2 */
+#define hx83102j_notouch_frame 0
+#define HX83102J_FLASH_SIZE 261120
+#define HX83102j_ic_addr_hw_crc 0x80010000
+#define HX83102j_data_hw_crc 0x0000ECCE
+
+/* CORE_IC */
+ #define ic_adr_ahb_addr_byte_0 0x00
+ #define ic_adr_ahb_rdata_byte_0 0x08
+ #define ic_adr_ahb_access_direction 0x0c
+ #define ic_adr_conti 0x13
+ #define ic_adr_incr4 0x0D
+ #define ic_adr_i2c_psw_lb 0x31
+ #define ic_adr_i2c_psw_ub 0x32
+ #define ic_cmd_ahb_access_direction_read 0x00
+ #define ic_cmd_conti 0x31
+ #define ic_cmd_incr4 0x10
+ #define ic_cmd_i2c_psw_lb 0x27
+ #define ic_cmd_i2c_psw_ub 0x95
+ #define ic_adr_tcon_on_rst 0x80020020
+ #define ic_adr_cs_central_state 0x900000A8
+/* CORE_IC */
+/* CORE_FW */
+ #define fw_addr_system_reset 0x90000018
+ #define fw_addr_ctrl_fw 0x9000005c
+ #define fw_addr_flag_reset_event 0x900000e4
+ #define fw_usb_detect_addr 0x10007F38
+ #define fw_addr_raw_out_sel 0x800204b4
+ #define fw_addr_reload_status 0x80050000
+ #define fw_addr_reload_crc32_result 0x80050018
+ #define fw_addr_reload_addr_from 0x80050020
+ #define fw_addr_reload_addr_cmd_beat 0x80050028
+ #define fw_data_system_reset 0x00000055
+ #define fw_data_safe_mode_release_pw_reset 0x00000000
+ #define fw_data_clear 0x00000000
+ #define fw_data_fw_stop 0x000000A5
+ #define fw_addr_set_frame_addr 0x10007294
+ #define fw_addr_sorting_mode_en 0x10007f04
+ #define fw_addr_fw_ver_addr 0x10007004
+ #define fw_addr_fw_cfg_addr 0x10007084
+ #define fw_addr_fw_vendor_addr 0x10007000
+ #define fw_addr_cus_info 0x10007008
+ #define fw_addr_proj_info 0x10007014
+ #define fw_addr_fw_dbg_msg_addr 0x10007f40
+ #define fw_addr_chk_fw_status 0x900000a8
+ #define fw_addr_chk_dd_status 0x900000E8
+ #define fw_addr_ap_notify_fw_sus 0x10007FD0
+ #define fw_data_ap_notify_fw_sus_en 0xA55AA55A
+ #define fw_data_ap_notify_fw_sus_dis 0x00000000
+ #define fw_addr_event_addr 0x30
+ #define fw_func_handshaking_pwd 0xA55AA55A
+ #define fw_func_handshaking_end 0x77887788
+ #define fw_addr_ulpm_33 0x33
+ #define fw_addr_ulpm_34 0x34
+ #define fw_data_ulpm_11 0x11
+ #define fw_data_ulpm_22 0x22
+ #define fw_data_ulpm_33 0x33
+ #define fw_data_ulpm_aa 0xAA
+ #define fw_addr_ctrl_mpap_ovl 0x100073EC
+ #define fw_data_ctrl_mpap_ovl_on 0x107380
+/* CORE_FW */
+/* CORE_FLASH */
+ #define flash_addr_ctrl_base 0x80000000
+ #define flash_addr_spi200_data (flash_addr_ctrl_base + 0x2c)
+/* CORE_FLASH */
+/* CORE_SRAM */
+ #define sram_adr_mkey 0x100070E8
+ #define sram_adr_rawdata_addr 0x10000000
+ #define sram_passwrd_start 0x5AA5
+ #define sram_passwrd_end 0xA55A
+/* CORE_SRAM */
+/* CORE_DRIVER */
+ #define driver_addr_fw_define_flash_reload 0x10007f00
+ #define driver_addr_fw_define_2nd_flash_reload 0x100072c0
+ #define driver_addr_fw_define_int_is_edge 0x10007088
+ #define driver_addr_fw_define_rxnum_txnum 0x100070f4
+ #define driver_addr_fw_define_maxpt_xyrvs 0x100070f8
+ #define driver_addr_fw_define_x_y_res 0x100070fc
+/* CORE_DRIVER */
+ #define zf_data_dis_flash_reload 0x00009AA9
+ #define zf_addr_system_reset 0x90000018
+ #define zf_data_system_reset 0x00000055
+ #define zf_data_sram_start_addr 0x08000000
+ #define zf_data_cfg_info 0x10007000
+ #define zf_data_fw_cfg_1 0x10007084
+ #define zf_data_fw_cfg_2 0x10007264
+ #define zf_data_fw_cfg_3 0x10007300
+ #define zf_data_adc_cfg_1 0x10006A00
+ #define zf_data_adc_cfg_2 0x10007B28
+ #define zf_data_adc_cfg_3 0x10007AF0
+ #define zf_data_map_table 0x10007500
+ #define ovl_section_num 3
+ #define ovl_border_reply 0x66
+ #define ovl_sorting_reply 0xAA
+ #define ovl_fault 0xFF
+ #define ovl_alg_request 0x11111111
+ #define ovl_alg_reply 0x22222222
+
+ #define time_var timespec64
+ #define time_var_fine tv_nsec
+ #define time_var_fine_unit (1000 * 1000)
+ #define time_func ktime_get_real_ts64
+ #define owner_line
+
+ #define HX_TP_BIN_CHECKSUM_CRC 3
+
+ #define FW_SIZE_255k 261120
+
+ #define HX83102J_ID "HX83102J"
+
+ /* origin is 20/50 */
+ #define RST_LOW_PERIOD_S 5000
+ #define RST_LOW_PERIOD_E 5100
+ #define RST_HIGH_PERIOD_ZF_S 5000
+ #define RST_HIGH_PERIOD_ZF_E 5100
+ #define RST_HIGH_PERIOD_S 50000
+ #define RST_HIGH_PERIOD_E 50100
+enum data_type {
+ HX_REG = 0xA5,
+ HX_DATA
+};
+
+struct hx_reg_t {
+ union {
+ u32 word;
+ u16 half[2];
+ u8 byte[4];
+ } data;
+ u32 len;
+ u32 data_type;
+};
+
+struct data_pack_t {
+ union {
+ u32 *word;
+ u16 *half;
+ u8 *byte;
+ void *ptr;
+ } data;
+ /* length in byte unit */
+ u32 len;
+ u32 data_type;
+};
+
+#define BYTE_REG(_reg, _data) \
+ { \
+ _reg.data.byte[0] = (_data) & 0xFF; \
+ _reg.len = 1; \
+ _reg.data_type = HX_REG; \
+ }
+#define HALF_REG(_reg, _data) \
+ { \
+ _reg.data.half[0] = cpu_to_le16((_data) & 0xFFFF); \
+ _reg.len = 2; \
+ _reg.data_type = HX_REG; \
+ }
+#define WORD_REG(_reg, _data) \
+ { \
+ _reg.data.word = cpu_to_le32(_data); \
+ _reg.len = 4; \
+ _reg.data_type = HX_REG; \
+ }
+
+// set val to already defined reg/data
+#define VAL_SET(_var, _val) \
+ ({ \
+ bool _ret = true; \
+ do { \
+ if (_var.data_type == HX_DATA) { \
+ memset(_var.data.byte, 0, _var.len); \
+ do { \
+ switch (_var.len) { \
+ case 1: \
+ _var.data.byte[0] = (_val) & 0xFF; \
+ break; \
+ case 2: \
+ _var.data.half[0] = cpu_to_le16((_val) & 0xFFFF); \
+ break; \
+ case 3: \
+ _var.data.half[0] = cpu_to_le16((_val) & 0xFFFF); \
+ _var.data.byte[2] = ((_val) >> 16) & 0xFF; \
+ break; \
+ case 4: \
+ _var.data.word[0] =\
+ cpu_to_le32((_val) & 0xFFFFFFFF); \
+ break; \
+ default: \
+ _ret = false; \
+ break; \
+ };\
+ } while (0); \
+ } else { \
+ _ret = false; \
+ } \
+ } while (0); \
+ _ret; \
+ })
+
+// set ptr/array to already defined reg/data
+#define PTR_SET(_var, _ptr, _len) \
+ ({ \
+ bool _ret = true; \
+ do { \
+ if ((_len) > (_var).len) { \
+ _ret = false; \
+ break; \
+ } \
+ memcpy((_var).data.byte, _ptr, (_len)); \
+ (_var).len = (_len); \
+ } while (0); \
+ _ret; \
+ })
+
+#define DEF_WORD_DATA(_data_name) \
+ u8 _data_name##_array[4] = {0}; \
+ struct data_pack_t _data_name = { \
+ .data.byte = _data_name##_array, \
+ .len = 4, \
+ .data_type = HX_DATA \
+ }
+
+#define ARRAY_DATA(_data, _byte_len) { \
+ _data.data.byte = (uint8_t *)_data, \
+ _data.len = _byte_len, \
+ .data_type = HX_DATA \
+ }
+
+#define REG_GET_VAL(_reg) \
+ ({ \
+ u32 _val = 0; \
+ do { \
+ switch (_reg.len) { \
+ case 1: \
+ _val = _reg.data.byte[0]; \
+ break; \
+ case 2: \
+ _val = le16_to_cpu(_reg.data.half[0]); \
+ break; \
+ case 3: \
+ _val = le16_to_cpu(_reg.data.half[0]) | (_reg.data.byte[2] << 16); \
+ break; \
+ case 4: \
+ _val = le32_to_cpu(_reg.data.word); \
+ break; \
+ } \
+ } while (0); \
+ _val; \
+ })
+
+struct ic_operation {
+ struct hx_reg_t addr_ahb_addr_byte_0;
+ struct hx_reg_t addr_ahb_rdata_byte_0;
+ struct hx_reg_t addr_ahb_access_direction;
+ struct hx_reg_t addr_conti;
+ struct hx_reg_t addr_incr4;
+ struct hx_reg_t adr_i2c_psw_lb;
+ struct hx_reg_t adr_i2c_psw_ub;
+ struct hx_reg_t data_ahb_access_direction_read;
+ struct hx_reg_t data_conti;
+ struct hx_reg_t data_incr4;
+ struct hx_reg_t data_i2c_psw_lb;
+ struct hx_reg_t data_i2c_psw_ub;
+ struct hx_reg_t addr_tcon_on_rst;
+ struct hx_reg_t addr_cs_central_state;
+};
+
+struct fw_operation {
+ struct hx_reg_t addr_system_reset;
+ struct hx_reg_t addr_ctrl_fw_isr;
+ struct hx_reg_t addr_flag_reset_event;
+ struct hx_reg_t addr_raw_out_sel;
+ struct hx_reg_t addr_reload_status;
+ struct hx_reg_t addr_reload_crc32_result;
+ struct hx_reg_t addr_reload_addr_from;
+ struct hx_reg_t addr_reload_addr_cmd_beat;
+ struct hx_reg_t addr_set_frame_addr;
+ struct hx_reg_t addr_sorting_mode_en;
+ struct hx_reg_t addr_fw_ver_addr;
+ struct hx_reg_t addr_fw_cfg_addr;
+ struct hx_reg_t addr_fw_vendor_addr;
+ struct hx_reg_t addr_cus_info;
+ struct hx_reg_t addr_proj_info;
+ struct hx_reg_t addr_ap_notify_fw_sus;
+ struct hx_reg_t data_ap_notify_fw_sus_en;
+ struct hx_reg_t data_ap_notify_fw_sus_dis;
+ struct hx_reg_t data_system_reset;
+ struct hx_reg_t data_clear;
+ struct hx_reg_t data_fw_stop;
+ struct hx_reg_t addr_event_addr;
+ struct hx_reg_t addr_usb_detect;
+};
+
+struct sram_operation {
+ struct hx_reg_t addr_mkey;
+ struct hx_reg_t addr_rawdata_addr;
+ struct hx_reg_t passwrd_start;
+ struct hx_reg_t passwrd_end;
+};
+
+struct driver_operation {
+ struct hx_reg_t addr_fw_define_flash_reload;
+ struct hx_reg_t addr_fw_define_2nd_flash_reload;
+ struct hx_reg_t addr_fw_define_int_is_edge;
+ struct hx_reg_t addr_fw_define_rxnum_txnum;
+ struct hx_reg_t addr_fw_define_maxpt_xyrvs;
+ struct hx_reg_t addr_fw_define_x_y_res;
+
+};
+
+struct zf_operation {
+ struct hx_reg_t data_dis_flash_reload;
+ struct hx_reg_t addr_system_reset;
+ struct hx_reg_t data_system_reset;
+ struct hx_reg_t data_sram_start_addr;
+ struct hx_reg_t data_sram_clean;
+ struct hx_reg_t data_cfg_info;
+ struct hx_reg_t data_fw_cfg_1;
+ struct hx_reg_t data_fw_cfg_2;
+ struct hx_reg_t data_fw_cfg_3;
+ struct hx_reg_t data_adc_cfg_1;
+ struct hx_reg_t data_adc_cfg_2;
+ struct hx_reg_t data_adc_cfg_3;
+ struct hx_reg_t data_map_table;
+};
+
+struct flash_version_info {
+ struct hx_reg_t addr_fw_ver_major;
+ struct hx_reg_t addr_fw_ver_minor;
+ struct hx_reg_t addr_cfg_ver_major;
+ struct hx_reg_t addr_cfg_ver_minor;
+ struct hx_reg_t addr_cid_ver_major;
+ struct hx_reg_t addr_cid_ver_minor;
+ struct hx_reg_t addr_cfg_table;
+ struct hx_reg_t addr_cfg_table_t;
+ struct hx_reg_t addr_hid_table;
+ struct hx_reg_t addr_hid_desc;
+ struct hx_reg_t addr_hid_rd_desc;
+};
+
+struct himax_core_command_regs {
+ struct flash_version_info flash_ver_info;
+ struct ic_operation ic_op;
+ struct fw_operation fw_op;
+ struct sram_operation sram_op;
+ struct driver_operation driver_op;
+ struct zf_operation zf_op;
+};
+struct hx_hid_rd_data_t {
+ u8 *rd_data;
+ u32 rd_length;
+};
+union hx_dword_data_t {
+ u32 dword;
+ u8 byte[4];
+};
+
+enum hid_reg_action {
+ REG_READ = 0,
+ REG_WRITE = 1
+};
+
+enum hid_reg_types {
+ REG_TYPE_EXT_AHB,
+ REG_TYPE_EXT_SRAM,
+ REG_TYPE_EXT_TYPE = 0xFFFFFFFF
+};
+
+struct rd_feature_unit_t {
+ u8 id_tag;
+ u8 id;
+ u8 usage_tag;
+ u8 usage;
+ u8 report_cnt_tag;
+ u16 report_cnt;
+ u8 feature_tag[2];
+} __packed;
+struct hx_hid_req_cfg_t {
+ u32 processing_id;
+ u32 data_type;
+ u32 self_test_type;
+ u32 handshake_set;
+ u32 handshake_get;
+ struct firmware *fw;
+ u32 current_size;
+ // HID REG READ/WRITE format:
+ // STANDARD TYPE
+ // [ID:1][READ/WRITE:1][REG_ADDR:4][REG_DATA:4] : 10 bytes
+ // 0 1 2~5 6~9
+ // EXT TYPE
+ // [ID:1][READ/WRITE:1][0xFFFFFFFF][REG_TYPE:1][REG_ADDR:1|4][REG_DATA:1~256]
+ // 0 1 2~5 6 7|7~10 8~263|11~266
+ union hx_dword_data_t reg_addr;
+ u32 reg_addr_sz;
+ u8 reg_data[HID_REG_SZ_MAX - 1 - 4];
+ u32 reg_data_sz;
+ u32 input_RD_de;
+};
+
+enum cell_type {
+ CHIP_IS_ON_CELL,
+ CHIP_IS_IN_CELL
+};
+
+#define HX_FULL_STACK_RAWDATA_SIZE \
+ (HX_STACK_ORG_LEN +\
+ (2 + FIX_HX_RX_NUM * FIX_HX_TX_NUM + FIX_HX_TX_NUM + FIX_HX_RX_NUM)\
+ * 2)
+
+struct himax_ic_data {
+ int vendor_fw_ver;
+ int vendor_config_ver;
+ int vendor_touch_cfg_ver;
+ int vendor_display_cfg_ver;
+ int vendor_cid_maj_ver;
+ int vendor_cid_min_ver;
+ int vendor_panel_ver;
+ int vendor_sensor_id;
+ int ic_adc_num;
+ u8 vendor_cus_info[12];
+ u8 vendor_proj_info[12];
+ u32 flash_size;
+ u32 HX_RX_NUM;
+ u32 HX_TX_NUM;
+ u32 HX_BT_NUM;
+ u32 HX_X_RES;
+ u32 HX_Y_RES;
+ u32 HX_MAX_PT;
+ u8 HX_INT_IS_EDGE;
+ u8 HX_STYLUS_FUNC;
+ u8 HX_STYLUS_ID_V2;
+ u8 HX_STYLUS_RATIO;
+ u32 icid;
+ bool enc16bits;
+ bool has_flash;
+};
+
+enum HX_TS_PATH {
+ HX_REPORT_COORD = 1,
+ HX_REPORT_COORD_RAWDATA,
+};
+
+enum HX_TS_STATUS {
+ HX_TS_GET_DATA_FAIL = -4,
+ HX_EXCP_EVENT,
+ HX_CHKSUM_FAIL,
+ HX_PATH_FAIL,
+ HX_TS_NORMAL_END = 0,
+ HX_EXCP_REC_OK,
+ HX_READY_SERVE,
+ HX_REPORT_DATA,
+ HX_EXCP_WARNING,
+ HX_IC_RUNNING,
+ HX_ZERO_EVENT_COUNT,
+ HX_RST_OK,
+};
+
+enum HX_ERROR_CODE {
+ NO_ERR = 0,
+ READY_TO_SERVE = 1,
+ WORK_OUT = 2,
+ HX_EMBEDDED_FW = 3,
+ BUS_FAIL = -1,
+ HX_INIT_FAIL = -1,
+ MEM_ALLOC_FAIL = -2,
+ CHECKSUM_FAIL = -3,
+ GESTURE_DETECT_FAIL = -4,
+ INPUT_REGISTER_FAIL = -5,
+ FW_NOT_READY = -6,
+ LENGTH_FAIL = -7,
+ OPEN_FILE_FAIL = -8,
+ PROBE_FAIL = -9,
+ ERR_WORK_OUT = -10,
+ ERR_STS_WRONG = -11,
+ ERR_TEST_FAIL = -12,
+ HW_CRC_FAIL = 1
+};
+
+struct himax_platform_data {
+ struct himax_ts_data *ts;
+ u16 pid;
+ bool power_off_3v3;
+ u8 cable_config[2];
+ int gpio_irq;
+ int of_irq;
+ int gpio_reset;
+ int ic_det_delay;
+ int ic_resume_delay;
+ int panel_id;
+ bool is_zf;
+ struct regulator *vccd_supply;
+ struct regulator *vcca_supply;
+};
+
+struct hx_hid_fw_unit_t {
+ u8 cmd;
+ u16 bin_start_offset;
+ u16 unit_sz;
+} __packed;
+
+struct hx_bin_desc_t {
+ u16 passwd;
+ u16 cid;
+ u8 panel_ver;
+ u16 fw_ver;
+ u8 ic_sign;
+ char customer[12];
+ char project[12];
+ char fw_major[12];
+ char fw_minor[12];
+ char date[12];
+ char ic_sign_2[12];
+} __packed;
+
+struct hx_hid_desc_t {
+ u16 desc_length;
+ u16 bcd_version;
+ u16 report_desc_length;
+ u16 max_input_length;
+ u16 max_output_length;
+ u16 max_fragment_length;
+ u16 vendor_id;
+ u16 product_id;
+ u16 version_id;
+ u16 flags;
+ u32 reserved;
+} __packed;
+struct hx_hid_info_t {
+ struct hx_hid_fw_unit_t main_mapping[9];
+ struct hx_hid_fw_unit_t bl_mapping;
+ struct hx_bin_desc_t fw_bin_desc;
+ u16 vid;
+ u16 pid;
+ u8 cfg_info[32];
+ u8 cfg_version;
+ u8 disp_version;
+ u8 rx;
+ u8 tx;
+ u16 yres;
+ u16 xres;
+ u8 pt_num;
+ u8 mkey_num;
+ u8 debug_info[78];
+} __packed;
+
+struct himax_ts_data {
+ bool initialized;
+ bool probe_finish;
+ bool suspended;
+ s32 notouch_frame;
+ s32 ic_notouch_frame;
+ atomic_t suspend_mode;
+ u8 x_channel;
+ u8 y_channel;
+ char chip_name[30];
+ u8 chip_cell_type;
+ u32 chip_max_dsram_size;
+ u32 ic_checksum_type;
+ bool ic_boot_done;
+ u32 probe_fail_flag;
+ u8 *xfer_data;
+ struct himax_ic_data *ic_data;
+
+ int touch_all_size;
+ int touch_info_size;
+
+ u8 *hx_rawdata_buf;
+ bool boot_upgrade_flag;
+ const struct firmware *hxfw;
+ bool has_alg_overlay;
+ u8 *ovl_idx;
+ bool zf_update_flag;
+ u8 *zf_update_cfg_buffer;
+#if defined(CONFIG_HID_HIMAX)
+ struct time_var deferred_start;
+ unsigned int ic_det_delay;
+#endif
+
+ u8 n_finger_support;
+ u8 irq_enabled;
+
+ u32 debug_log_level;
+
+ s32 rst_gpio;
+ s32 use_irq;
+ s32 (*power)(s32 on);
+
+ struct device *dev;
+ struct workqueue_struct *himax_wq;
+ struct work_struct work;
+
+ struct hrtimer timer;
+ struct i2c_client *client;
+ struct himax_platform_data *pdata;
+ /* mutex lock for reg access */
+ struct mutex reg_lock;
+ /* mutex lock for read/write action */
+ struct mutex rw_lock;
+ /* mutex lock for hid ioctl action */
+ struct mutex hid_ioctl_lock;
+ atomic_t irq_state;
+ /* spin lock for irq */
+ spinlock_t irq_lock;
+
+/******* SPI-start *******/
+ struct spi_device *spi;
+ s32 hx_irq;
+ u8 *xfer_buff;
+/******* SPI-end *******/
+
+ struct hid_device *hid;
+ struct hx_hid_desc_t hid_desc;
+ struct hx_hid_rd_data_t hid_rd_data;
+ struct hx_hid_info_t hid_info;
+ struct hx_hid_req_cfg_t hid_req_cfg;
+ struct hx_bin_desc_t fw_bin_desc;
+ bool hid_probe;
+ bool resume_success;
+
+ s32 in_self_test;
+ s32 suspend_resume_done;
+ s32 bus_speed;
+
+ s32 excp_reset_active;
+ s32 excp_eb_event_flag;
+ s32 excp_ec_event_flag;
+ s32 excp_ed_event_flag;
+ s32 excp_zero_event_count;
+
+#if defined(CONFIG_FB)
+ struct notifier_block fb_notif;
+ struct workqueue_struct *himax_att_wq;
+ struct delayed_work work_att;
+#endif
+
+ struct notifier_block power_notif;
+ struct workqueue_struct *himax_pwr_wq;
+ struct delayed_work work_pwr;
+
+ struct workqueue_struct *himax_boot_upgrade_wq;
+ struct delayed_work work_boot_upgrade;
+
+ struct workqueue_struct *himax_hid_debug_wq;
+ struct delayed_work work_hid_update;
+ u8 usb_connected;
+ u8 *cable_config;
+ u8 latest_power_status;
+
+ struct workqueue_struct *himax_resume_delayed_work_wq;
+ struct delayed_work work_resume_delayed_work;
+
+ u8 slave_write_reg;
+ u8 slave_read_reg;
+ bool acc_slave_reg;
+ bool select_slave_reg;
+ struct list_head list;
+};
+struct himax_core_fp {
+/* CORE_IC */
+ void (*fp_burst_enable)(struct himax_ts_data *ts, u8 auto_add_4_byte);
+ int (*fp_register_read)(struct himax_ts_data *ts, u8 *addr,
+ u8 *buf, u32 len);
+ int (*fp_reg_read)(struct himax_ts_data *ts, struct hx_reg_t *addr,
+ struct data_pack_t *data);
+ int (*fp_register_write)(struct himax_ts_data *ts, u8 *addr,
+ u8 *val, u32 len);
+ int (*fp_reg_write)(struct himax_ts_data *ts, struct hx_reg_t *addr,
+ struct data_pack_t *data);
+ void (*fp_interface_on)(struct himax_ts_data *ts);
+ void (*fp_sense_on)(struct himax_ts_data *ts, u8 flash_mode);
+ bool (*fp_sense_off)(struct himax_ts_data *ts, bool check_en);
+ void (*fp_power_on_init)(struct himax_ts_data *ts);
+/* CORE_IC */
+
+/* CORE_FW */
+ void (*fp_system_reset)(struct himax_ts_data *ts);
+ void (*fp_usb_detect_set)(struct himax_ts_data *ts,
+ const u8 *cable_config);
+ void (*fp_diag_register_set)(struct himax_ts_data *ts,
+ u8 diag_command);
+ void (*fp_reload_disable)(struct himax_ts_data *ts, int disable);
+ void (*fp_read_FW_ver)(struct himax_ts_data *ts);
+ void (*fp_read_FW_status)(struct himax_ts_data *ts);
+ void (*fp_irq_switch)(struct himax_ts_data *ts, int switch_on);
+ int (*fp_assign_sorting_mode)(struct himax_ts_data *ts, u8 *tmp_data);
+ void (*fp_ap_notify_fw_sus)(struct himax_ts_data *ts, int suspend);
+/* CORE_FW */
+/* CORE_FLASH */
+ int (*fp_diff_overlay_flash)(struct himax_ts_data *ts);
+/* CORE_FLASH */
+/* CORE_DRIVER */
+ bool (*fp_chip_detect)(struct himax_ts_data *ts);
+ void (*fp_chip_init)(struct himax_ts_data *ts);
+ void (*fp_pin_reset)(struct himax_ts_data *ts);
+ void (*fp_ic_reset)(struct himax_ts_data *ts,
+ u8 loadconfig, u8 int_off);
+ u8 (*fp_tp_info_check)(struct himax_ts_data *ts);
+ void (*fp_touch_information)(struct himax_ts_data *ts);
+ void (*fp_calc_touch_data_size)(struct himax_ts_data *ts);
+ int (*fp_ic_excp_recovery)(struct himax_ts_data *ts,
+ u32 hx_excp_event,
+ u32 hx_zero_event, u32 length);
+ void (*fp_excp_ic_reset)(struct himax_ts_data *ts);
+ void (*fp_resend_cmd_func)(struct himax_ts_data *ts, bool suspended);
+ bool (*fp_read_event_stack)(struct himax_ts_data *ts, u8 *buf,
+ u32 length);
+ void (*fp_suspend_proc)(struct himax_ts_data *ts, bool suspended);
+ void (*fp_resume_proc)(struct himax_ts_data *ts, bool suspended);
+/* CORE_DRIVER */
+/* INSPECTION*/
+/* INSPECTION*/
+};
+
+#define FLASH_VER_GET_VAL(_reg) REG_GET_VAL(g_core_regs.flash_ver_info._reg)
+#define IC_GET_VAL(_reg) REG_GET_VAL(g_core_regs.ic_op._reg)
+#define FW_GET_VAL(_reg) REG_GET_VAL(g_core_regs.fw_op._reg)
+#define FLASH_GET_VAL(_reg) REG_GET_VAL(g_core_regs.flash_op._reg)
+#define SRAM_GET_VAL(_reg) REG_GET_VAL(g_core_regs.sram_op._reg)
+#define DRV_GET_VAL(_reg) REG_GET_VAL(g_core_regs.driver_op._reg)
+#define ZF_GET_VAL(_reg) REG_GET_VAL(g_core_regs.zf_op._reg)
+#define REG_GET_ARRAY(_reg) \
+ ({ \
+ _reg.data.byte; \
+ })
+#define FLASH_VER_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.flash_ver_info._reg)
+#define IC_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.ic_op._reg)
+#define FW_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.fw_op._reg)
+#define FLASH_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.flash_op._reg)
+#define SRAM_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.sram_op._reg)
+#define DRV_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.driver_op._reg)
+#define ZF_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.zf_op._reg)
+#define REG_GET_SZ(_reg) \
+ ({ \
+ _reg.len; \
+ })
+#define FLASH_VER_GET_SZ(_reg) REG_GET_SZ(g_core_regs.flash_ver_info._reg)
+#define IC_GET_SZ(_reg) REG_GET_SZ(g_core_regs.ic_op._reg)
+#define FW_GET_SZ(_reg) REG_GET_SZ(g_core_regs.fw_op._reg)
+#define FLASH_GET_SZ(_reg) REG_GET_SZ(g_core_regs.flash_op._reg)
+#define SRAM_GET_SZ(_reg) REG_GET_SZ(g_core_regs.sram_op._reg)
+#define DRV_GET_SZ(_reg) REG_GET_SZ(g_core_regs.driver_op._reg)
+#define ZF_GET_SZ(_reg) REG_GET_SZ(g_core_regs.zf_op._reg)
+void himax_rst_gpio_set(int pinnum, u8 value);
+void himax_cable_detect_func(struct himax_ts_data *ts, bool force_renew);
+int himax_report_data_init(struct himax_ts_data *ts);
+
+int himax_bus_read(struct himax_ts_data *ts, u8 cmd, u8 *buf,
+ u32 len);
+int himax_bus_write(struct himax_ts_data *ts, u8 cmd, u8 *addr,
+ u8 *data, u32 len);
+
+void himax_int_enable(struct himax_ts_data *ts, int enable);
+
+union host_ext_rd_t {
+ struct __packed rd_struct_t {
+ u8 header[14];
+ struct rd_feature_unit_t cfg;// ID_CFG
+ struct rd_feature_unit_t reg_rw;// ID_REG_RW
+ struct rd_feature_unit_t monitor_sel;// ID_TOUCH_MONITOR_SEL
+ struct rd_feature_unit_t monitor;// ID_TOUCH_MONITOR
+ // rd_feature_unit_t monitor_partial;// ID_TOUCH_MONITOR_PARTIAL
+ struct rd_feature_unit_t fw_update;// ID_FW_UPDATE
+ struct rd_feature_unit_t fw_update_handshaking;// ID_FW_UPDATE_HANDSHAKING
+ struct rd_feature_unit_t self_test;// ID_SELF_TEST
+ struct rd_feature_unit_t input_rd_en;// ID_INPUT_RD_DE
+ u8 end_collection;
+ } rd_struct;
+ u8 host_report_descriptor[sizeof(struct rd_struct_t)];
+};
+
+union heatmap_rd_t {
+ struct __packed heatmap_struct_t {
+ u8 header[17];
+ u8 heatmap_info_desc[29];
+ u8 heatmap_data_hdr[9];
+ u8 heatmap_data_cnt_tag;
+ u16 heatmap_data_cnt;
+ u8 heatmap_input_desc[2];
+ u8 end_collection;
+ } heatmap_struct;
+ u8 host_report_descriptor[sizeof(struct heatmap_struct_t)];
+};
+
+/* FW Auto upgrade case, you need to setup the fix_touch_info of module
+ */
+
+#define HID_REPORT_HDR_SZ (2)
+void himax_ts_work(struct himax_ts_data *ts);
+enum hrtimer_restart himax_ts_timer_func(struct hrtimer *timer);
+int himax_resume(struct device *dev);
+int himax_suspend(struct device *dev);
+
+// int himax_spi_drv_init(struct himax_ts_data *ts);
+void himax_spi_drv_exit(void);
+int himax_chip_init(struct himax_ts_data *ts);
+int himax_report_data_init(struct himax_ts_data *ts);
+void himax_cable_detect_func(struct himax_ts_data *ts, bool force_renew);
+#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread