[PATCH AUTOSEL 6.1 01/24] Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

[PATCH AUTOSEL 6.1 01/24] Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

[Sasha Levin]

From: José Pekkarinen <jose.pekkarinen@foxhound.fi>

[ Upstream commit c1f342f35f820b33390571293498c3e2e9bc77ec ]

Observed on dmesg of my laptop I see the following
output:

[   19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[   19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[   19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[   20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   20.397608] mousedev: PS/2 mouse device common for all mice

This patch will add its pnp id to the smbus list to
produce the setup of intertouch for the device.

Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Link: https://lore.kernel.org/r/20231114063607.71772-1-jose.pekkarinen@foxhound.fi
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index e43e93ac2798a..b6749af462620 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -183,6 +183,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN009b", /* T580 */
 	"LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */
 	"LEN040f", /* P1 Gen 3 */
+	"LEN0411", /* L14 Gen 1 */
 	"LEN200f", /* T450s */
 	"LEN2044", /* L470  */
 	"LEN2054", /* E480 */
-- 
2.43.0

[PATCH AUTOSEL 6.1 03/24] Input: atkbd - skip ATKBD_CMD_GETID in translated mode

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 936e4d49ecbc8c404790504386e1422b599dec39 ]

There have been multiple reports of keyboard issues on recent laptop models
which can be worked around by setting i8042.dumbkbd, with the downside
being this breaks the capslock LED.

It seems that these issues are caused by recent laptops getting confused by
ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for
this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode.

The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2
mice/touchpads and those are never used in translated mode.

Examples of laptop models which benefit from skipping ATKBD_CMD_GETID:

* "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx"
  models the kbd stops working for the first 2 - 5 minutes after boot
  (waiting for EC watchdog reset?)

* On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard

* At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see:
  https://github.com/yescallop/atkbd-nogetid

This has been tested on:

1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not
   in translated mode when no keyboard is plugged in and with a ps/2 kbd
   a "AT Translated Set 2 keyboard" /dev/input/event# node shows up

2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard)

Reported-by: Shang Ye <yesh25@mail2.sysu.edu.cn>
Closes: https://lore.kernel.org/linux-input/886D6167733841AE+20231017135318.11142-1-yesh25@mail2.sysu.edu.cn/
Closes: https://github.com/yescallop/atkbd-nogetid
Reported-by: gurevitch <mail@gurevit.ch>
Closes: https://lore.kernel.org/linux-input/2iAJTwqZV6lQs26cTb38RNYqxvsink6SRmrZ5h0cBUSuf9NT0tZTsf9fEAbbto2maavHJEOP8GA1evlKa6xjKOsaskDhtJWxjcnrgPigzVo=@gurevit.ch/
Reported-by: Egor Ignatov <egori@altlinux.org>
Closes: https://lore.kernel.org/all/20210609073333.8425-1-egori@altlinux.org/
Reported-by: Anton Zhilyaev <anton@cpp.in>
Closes: https://lore.kernel.org/linux-input/20210201160336.16008-1-anton@cpp.in/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2086156
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231115174625.7462-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/atkbd.c | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 246958795f606..e1e4f1133296a 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -746,6 +746,44 @@ static void atkbd_deactivate(struct atkbd *atkbd)
 			ps2dev->serio->phys);
 }
 
+#ifdef CONFIG_X86
+static bool atkbd_is_portable_device(void)
+{
+	static const char * const chassis_types[] = {
+		"8",	/* Portable */
+		"9",	/* Laptop */
+		"10",	/* Notebook */
+		"14",	/* Sub-Notebook */
+		"31",	/* Convertible */
+		"32",	/* Detachable */
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(chassis_types); i++)
+		if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i]))
+			return true;
+
+	return false;
+}
+
+/*
+ * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops
+ * the controller is always in translated mode. In this mode mice/touchpads will
+ * not work. So in this case simply assume a keyboard is connected to avoid
+ * confusing some laptop keyboards.
+ *
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
+ * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
+ * translated mode that is a no-op.
+ */
+static bool atkbd_skip_getid(struct atkbd *atkbd)
+{
+	return atkbd->translated && atkbd_is_portable_device();
+}
+#else
+static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; }
+#endif
+
 /*
  * atkbd_probe() probes for an AT keyboard on a serio port.
  */
@@ -775,12 +813,12 @@ static int atkbd_probe(struct atkbd *atkbd)
  */
 
 	param[0] = param[1] = 0xa5;	/* initialize with invalid values */
-	if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+	if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
 
 /*
- * If the get ID command failed, we check if we can at least set the LEDs on
- * the keyboard. This should work on every keyboard out there. It also turns
- * the LEDs off, which we want anyway.
+ * If the get ID command was skipped or failed, we check if we can at least set
+ * the LEDs on the keyboard. This should work on every keyboard out there.
+ * It also turns the LEDs off, which we want anyway.
  */
 		param[0] = 0;
 		if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
-- 
2.43.0

[PATCH AUTOSEL 6.1 04/24] Input: i8042 - add nomux quirk for Acer P459-G2-M

[Sasha Levin]

From: Esther Shimanovich <eshimanovich@chromium.org>

[ Upstream commit 335fe00319e030d481a54d5e0e68d50c5e672c0e ]

After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.

Enabling this quirk prevents this behavior from occurring.

Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org>
Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3029631d9c11@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 9c39553d30fa2..b585b1dab870e 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -360,6 +360,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
 	},
+	{
+		/* Acer TravelMate P459-G2-M */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate P459-G2-M"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
 	{
 		/* Amoi M636/A737 */
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.1 05/24] Input: amimouse - convert to platform remove callback returning void

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 42b8ff47720258d1f6a4412e780a480c139773a0 ]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231201133747.1099286-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/amimouse.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index a50e503548323..cda0c3ff5a288 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -125,16 +125,15 @@ static int __init amimouse_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit amimouse_remove(struct platform_device *pdev)
+static void __exit amimouse_remove(struct platform_device *pdev)
 {
 	struct input_dev *dev = platform_get_drvdata(pdev);
 
 	input_unregister_device(dev);
-	return 0;
 }
 
 static struct platform_driver amimouse_driver = {
-	.remove = __exit_p(amimouse_remove),
+	.remove_new = __exit_p(amimouse_remove),
 	.driver   = {
 		.name	= "amiga-mouse",
 	},
-- 
2.43.0

[PATCH AUTOSEL 6.1 09/24] Input: xpad - add Razer Wolverine V2 support

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit c3d1610345b79cbe29ef6ca04a4780eff0d360c7 ]

Add the VID and PID of Razer Wolverine V2 to xpad_device.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 8404286302b0c..e8011d70d0799 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -286,6 +286,7 @@ static const struct xpad_device {
 	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
+	{ 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
 	{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
 	{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
 	{ 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
-- 
2.43.0

[PATCH AUTOSEL 6.1 11/24] HID: nintendo: fix initializer element is not constant error

[Sasha Levin]

From: Ryan McClelland <rymcclel@gmail.com>

[ Upstream commit 0b7dd38c1c520b650a889a81919838671b689eb9 ]

With gcc-7 builds, an error happens with the controller button values being
defined as const. Change to a define.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312141227.C2h1IzfI-lkp@intel.com/

Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nintendo.c | 44 +++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 8a8a3dd8af0c1..907c9b574e3b3 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -325,28 +325,28 @@ struct joycon_imu_cal {
  * All the controller's button values are stored in a u32.
  * They can be accessed with bitwise ANDs.
  */
-static const u32 JC_BTN_Y	= BIT(0);
-static const u32 JC_BTN_X	= BIT(1);
-static const u32 JC_BTN_B	= BIT(2);
-static const u32 JC_BTN_A	= BIT(3);
-static const u32 JC_BTN_SR_R	= BIT(4);
-static const u32 JC_BTN_SL_R	= BIT(5);
-static const u32 JC_BTN_R	= BIT(6);
-static const u32 JC_BTN_ZR	= BIT(7);
-static const u32 JC_BTN_MINUS	= BIT(8);
-static const u32 JC_BTN_PLUS	= BIT(9);
-static const u32 JC_BTN_RSTICK	= BIT(10);
-static const u32 JC_BTN_LSTICK	= BIT(11);
-static const u32 JC_BTN_HOME	= BIT(12);
-static const u32 JC_BTN_CAP	= BIT(13); /* capture button */
-static const u32 JC_BTN_DOWN	= BIT(16);
-static const u32 JC_BTN_UP	= BIT(17);
-static const u32 JC_BTN_RIGHT	= BIT(18);
-static const u32 JC_BTN_LEFT	= BIT(19);
-static const u32 JC_BTN_SR_L	= BIT(20);
-static const u32 JC_BTN_SL_L	= BIT(21);
-static const u32 JC_BTN_L	= BIT(22);
-static const u32 JC_BTN_ZL	= BIT(23);
+#define JC_BTN_Y	 BIT(0)
+#define JC_BTN_X	 BIT(1)
+#define JC_BTN_B	 BIT(2)
+#define JC_BTN_A	 BIT(3)
+#define JC_BTN_SR_R	 BIT(4)
+#define JC_BTN_SL_R	 BIT(5)
+#define JC_BTN_R	 BIT(6)
+#define JC_BTN_ZR	 BIT(7)
+#define JC_BTN_MINUS	 BIT(8)
+#define JC_BTN_PLUS	 BIT(9)
+#define JC_BTN_RSTICK	 BIT(10)
+#define JC_BTN_LSTICK	 BIT(11)
+#define JC_BTN_HOME	 BIT(12)
+#define JC_BTN_CAP	 BIT(13) /* capture button */
+#define JC_BTN_DOWN	 BIT(16)
+#define JC_BTN_UP	 BIT(17)
+#define JC_BTN_RIGHT	 BIT(18)
+#define JC_BTN_LEFT	 BIT(19)
+#define JC_BTN_SR_L	 BIT(20)
+#define JC_BTN_SL_L	 BIT(21)
+#define JC_BTN_L	 BIT(22)
+#define JC_BTN_ZL	 BIT(23)
 
 enum joycon_msg_type {
 	JOYCON_MSG_TYPE_NONE,
-- 
2.43.0

[PATCH AUTOSEL 6.1 17/24] HID: nintendo: Prevent divide-by-zero on code

[Sasha Levin]

From: "Guilherme G. Piccoli" <gpiccoli@igalia.com>

[ Upstream commit 6eb04ca8c52e3f8c8ea7102ade81d642eee87f4a ]

It was reported [0] that adding a generic joycon to the system caused
a kernel crash on Steam Deck, with the below panic spew:

divide error: 0000 [#1] PREEMPT SMP NOPTI
[...]
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023
RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
[...]
Call Trace:
 [...]
 ? exc_divide_error+0x38/0x50
 ? nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
 ? asm_exc_divide_error+0x1a/0x20
 ? nintendo_hid_event+0x307/0xcc1 [hid_nintendo]
 hid_input_report+0x143/0x160
 hidp_session_run+0x1ce/0x700 [hidp]

Since it's a divide-by-0 error, by tracking the code for potential
denominator issues, we've spotted 2 places in which this could happen;
so let's guard against the possibility and log in the kernel if the
condition happens. This is specially useful since some data that
fills some denominators are read from the joycon HW in some cases,
increasing the potential for flaws.

[0] https://github.com/ValveSoftware/SteamOS/issues/1070

Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Tested-by: Sam Lantinga <slouken@libsdl.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nintendo.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 907c9b574e3b3..df07e3ae0ffb4 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -859,14 +859,27 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
  */
 static void joycon_calc_imu_cal_divisors(struct joycon_ctlr *ctlr)
 {
-	int i;
+	int i, divz = 0;
 
 	for (i = 0; i < 3; i++) {
 		ctlr->imu_cal_accel_divisor[i] = ctlr->accel_cal.scale[i] -
 						ctlr->accel_cal.offset[i];
 		ctlr->imu_cal_gyro_divisor[i] = ctlr->gyro_cal.scale[i] -
 						ctlr->gyro_cal.offset[i];
+
+		if (ctlr->imu_cal_accel_divisor[i] == 0) {
+			ctlr->imu_cal_accel_divisor[i] = 1;
+			divz++;
+		}
+
+		if (ctlr->imu_cal_gyro_divisor[i] == 0) {
+			ctlr->imu_cal_gyro_divisor[i] = 1;
+			divz++;
+		}
 	}
+
+	if (divz)
+		hid_warn(ctlr->hdev, "inaccurate IMU divisors (%d)\n", divz);
 }
 
 static const s16 DFLT_ACCEL_OFFSET /*= 0*/;
@@ -1095,16 +1108,16 @@ static void joycon_parse_imu_report(struct joycon_ctlr *ctlr,
 		    JC_IMU_SAMPLES_PER_DELTA_AVG) {
 			ctlr->imu_avg_delta_ms = ctlr->imu_delta_samples_sum /
 						 ctlr->imu_delta_samples_count;
-			/* don't ever want divide by zero shenanigans */
-			if (ctlr->imu_avg_delta_ms == 0) {
-				ctlr->imu_avg_delta_ms = 1;
-				hid_warn(ctlr->hdev,
-					 "calculated avg imu delta of 0\n");
-			}
 			ctlr->imu_delta_samples_count = 0;
 			ctlr->imu_delta_samples_sum = 0;
 		}
 
+		/* don't ever want divide by zero shenanigans */
+		if (ctlr->imu_avg_delta_ms == 0) {
+			ctlr->imu_avg_delta_ms = 1;
+			hid_warn(ctlr->hdev, "calculated avg imu delta of 0\n");
+		}
+
 		/* useful for debugging IMU sample rate */
 		hid_dbg(ctlr->hdev,
 			"imu_report: ms=%u last_ms=%u delta=%u avg_delta=%u\n",
-- 
2.43.0