From: Hans de Goede <hdegoede@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "Hans de Goede" <hdegoede@redhat.com>,
linux-input@vger.kernel.org,
"Barnabás Pőcze" <pobrn@protonmail.com>
Subject: [PATCH] Input: atkbd - Use ab83 as id when skipping the getid command
Date: Tue, 16 Jan 2024 21:43:25 +0100 [thread overview]
Message-ID: <20240116204325.7719-1-hdegoede@redhat.com> (raw)
Barnabás reported that the change to skip the getid command
when the controller is in translated mode on laptops caused
the Version field of his "AT Translated Set 2 keyboard"
input device to change from ab83 to abba, breaking a custom
hwdb entry for this keyboard.
Use the standard ab83 id for keyboards when getid is skipped
(rather then that getid fails) to avoid reporting a different
Version to userspace then before skipping the getid.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Barnabás Pőcze <pobrn@protonmail.com>
Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/input/keyboard/atkbd.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 786f00f6b7fd..13ef6284223d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -791,9 +791,9 @@ static bool atkbd_is_portable_device(void)
* not work. So in this case simply assume a keyboard is connected to avoid
* confusing some laptop keyboards.
*
- * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
- * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
- * translated mode that is a no-op.
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard
+ * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id
+ * and in translated mode that is a no-op.
*/
static bool atkbd_skip_getid(struct atkbd *atkbd)
{
@@ -811,6 +811,7 @@ static int atkbd_probe(struct atkbd *atkbd)
{
struct ps2dev *ps2dev = &atkbd->ps2dev;
unsigned char param[2];
+ bool skip_getid;
/*
* Some systems, where the bit-twiddling when testing the io-lines of the
@@ -832,7 +833,8 @@ static int atkbd_probe(struct atkbd *atkbd)
*/
param[0] = param[1] = 0xa5; /* initialize with invalid values */
- if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+ skip_getid = atkbd_skip_getid(atkbd);
+ if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
/*
* If the get ID command was skipped or failed, we check if we can at least set
@@ -842,7 +844,7 @@ static int atkbd_probe(struct atkbd *atkbd)
param[0] = 0;
if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
return -1;
- atkbd->id = 0xabba;
+ atkbd->id = skip_getid ? 0xab83 : 0xabba;
return 0;
}
--
2.43.0
next reply other threads:[~2024-01-16 20:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-16 20:43 Hans de Goede [this message]
2024-01-16 21:32 ` [PATCH] Input: atkbd - Use ab83 as id when skipping the getid command Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240116204325.7719-1-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=pobrn@protonmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox