From: Michael Zaidman <michael.zaidman@gmail.com>
To: chrysh@christina-quast.de, daniel.beer@igorinstitute.com,
jikos@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-serial@vger.kernel.org, ilpo.jarvinen@linux.intel.com,
johan@kernel.org, gregkh@linuxfoundation.org, equinox@diac24.net,
michael.zaidman@gmail.com
Subject: [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4
Date: Sat, 10 Feb 2024 23:51:28 +0200 [thread overview]
Message-ID: <20240210215147.77629-1-michael.zaidman@gmail.com> (raw)
Modifications on top of "[PATCH v4 RESEND] hid-ft260: Add serial driver"
https://lore.kernel.org/all/20231218093153.192268-1-contact@christina-quast.de/
They are mostly the fixes to the original v4 patch and should be melded into
the v5 patch rather than upstreamed as separate patches.
Michael Zaidman (19):
hid-ft260: fix incompatible-pointer-types error
hid-ft260: fix Wformat warning
hid-ft260: fix i2c driver regression in ft260_raw_event
hid-ft260: remove dead code in ft260_uart_receive_chars
hid-ft260: fix unprotected write_buf concurrent access
hid-ft260: uart: enable wakeup workaround
hid-ft260: depend wakeup workaround activation on uart baud rate
hid-ft260: depend wakeup workaround activation on eeprom config
hid-ft260: uart: wakeup device early to not lose rx data
hid-ft260: uart: do not configure baud rate twice
hid-ft260: uart: do not disable wakeup workaround twice
hid-ft260: uart: use kfifo_avail for fifo write room check
hid-ft260: improve usb interface type detection logic
hid-ft260: uart: cleanup and refactoring
hid-ft260: uart: remove FIXME for wake-up workaround
hid-ft260: uart: suppress unhandled report 0xb1 dmesg
hid-ft260: uart: arm wake-up timer unconditionally on tty session start
hid-ft260: uart: fix rx data loss after device reopening
hid-ft260: uart: improve write performance
drivers/hid/hid-ft260.c | 330 ++++++++++++++++++++++------------------
1 file changed, 185 insertions(+), 145 deletions(-)
--
2.40.1
next reply other threads:[~2024-02-10 21:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-10 21:51 Michael Zaidman [this message]
2024-02-10 21:51 ` [PATCH v1 01/19] hid-ft260: fix incompatible-pointer-types error Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 02/19] hid-ft260: fix Wformat warning Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 03/19] hid-ft260: fix i2c driver regression in ft260_raw_event Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 04/19] hid-ft260: remove dead code in ft260_uart_receive_chars Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 05/19] hid-ft260: fix unprotected write_buf concurrent access Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 06/19] hid-ft260: uart: enable wakeup workaround Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 07/19] hid-ft260: depend wakeup workaround activation on uart baud rate Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 08/19] hid-ft260: depend wakeup workaround activation on eeprom config Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 09/19] hid-ft260: uart: wakeup device early to not lose rx data Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 10/19] hid-ft260: uart: do not configure baud rate twice Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 11/19] hid-ft260: uart: do not disable wakeup workaround twice Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 12/19] hid-ft260: uart: use kfifo_avail for fifo write room check Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 13/19] hid-ft260: improve usb interface type detection logic Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 14/19] hid-ft260: uart: cleanup and refactoring Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 15/19] hid-ft260: uart: remove FIXME for wake-up workaround Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 16/19] hid-ft260: uart: suppress unhandled report 0xb1 dmesg Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 17/19] hid-ft260: uart: arm wake-up timer unconditionally on tty session start Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 18/19] hid-ft260: uart: fix rx data loss after device reopening Michael Zaidman
2024-02-10 21:51 ` [PATCH v1 19/19] hid-ft260: uart: improve write performance Michael Zaidman
2024-02-23 21:22 ` Michael Zaidman
2024-02-13 10:20 ` [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4 Jiri Kosina
2024-02-23 13:07 ` Christina Quast
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240210215147.77629-1-michael.zaidman@gmail.com \
--to=michael.zaidman@gmail.com \
--cc=chrysh@christina-quast.de \
--cc=daniel.beer@igorinstitute.com \
--cc=equinox@diac24.net \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jikos@kernel.org \
--cc=johan@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).