From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@kernel.org>
To: "Hans de Goede" <hdegoede@redhat.com>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
Joel Selvaraj <joelselvaraj.oss@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v5 0/3] novatek-nvt-ts: add support for NT36672A touchscreen
Date: Sat, 01 Jun 2024 15:44:42 -0500 [thread overview]
Message-ID: <20240601-nvt-ts-devicetree-regulator-support-v5-0-aa9bf986347d@gmail.com> (raw)
Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
---
Changes in v5:
- Made the chip data a local variable as it is only used during probe.
- Handle the regulator disable correctly for all exit paths in probe.
- Link to v4: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v4-0-e0c0174464c4@gmail.com
Changes in v4:
- Use lowercase i2c device id as suggested by Hans de Goede.
- Disable the regulators after nvt_ts_read_data during probe.
- Link to v3: https://lore.kernel.org/r/20240526-nvt-ts-devicetree-regulator-support-v3-0-aa88d10ccd9a@gmail.com
Changes in v3:
- Fix indentation in the binding as suggested by Krzysztof Kozlowski.
- Picked up Krzysztof Kozlowski's Reviewed-by tag for the binding.
- Link to v2: https://lore.kernel.org/r/20240524-nvt-ts-devicetree-regulator-support-v2-0-b74947038c44@gmail.com
Changes in v2:
- The generic i2c device id is now replaced with the correct IC variant
provided by Hans de Goede
- Updated the bindings to reflect the latest changes and also incorporated
the suggestions provided by Krzysztof Kozlowski
- Link to v1: https://lore.kernel.org/r/20240521-nvt-ts-devicetree-regulator-support-v1-0-8d766c639dca@gmail.com
---
Joel Selvaraj (3):
Input: novatek-nvt-ts: replace generic i2c device id with specific IC variant
dt-bindings: input: document Novatek NVT touchscreen controller
Input: novatek-nvt-ts: add support for NT36672A touchscreen
.../bindings/input/touchscreen/novatek,nvt-ts.yaml | 62 ++++++++++++++++++++
MAINTAINERS | 1 +
drivers/input/touchscreen/novatek-nvt-ts.c | 67 ++++++++++++++++++++--
drivers/platform/x86/x86-android-tablets/other.c | 2 +-
4 files changed, 125 insertions(+), 7 deletions(-)
---
base-commit: 6578aac6a270bd6deb9f9319b991dd430de263dd
change-id: 20240518-nvt-ts-devicetree-regulator-support-ac9e49b78a16
Best regards,
--
Joel Selvaraj <joelselvaraj.oss@gmail.com>
next reply other threads:[~2024-06-01 20:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-01 20:44 Joel Selvaraj via B4 Relay [this message]
2024-06-01 20:44 ` [PATCH v5 1/3] Input: novatek-nvt-ts: replace generic i2c device id with specific IC variant Joel Selvaraj via B4 Relay
2024-06-02 13:11 ` Hans de Goede
2024-06-02 13:23 ` Hans de Goede
2024-06-01 20:44 ` [PATCH v5 2/3] dt-bindings: input: document Novatek NVT touchscreen controller Joel Selvaraj via B4 Relay
2024-06-01 20:44 ` [PATCH v5 3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen Joel Selvaraj via B4 Relay
2024-06-02 13:12 ` Hans de Goede
2024-09-28 5:45 ` [PATCH v5 0/3] " Joel Selvaraj
2024-09-28 7:49 ` Krzysztof Kozlowski
2024-09-28 19:50 ` Joel Selvaraj
2024-09-30 2:14 ` Dmitry Torokhov
2024-09-30 19:56 ` Joel Selvaraj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240601-nvt-ts-devicetree-regulator-support-v5-0-aa9bf986347d@gmail.com \
--to=devnull+joelselvaraj.oss.gmail.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=joelselvaraj.oss@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).