From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@kernel.org>
To: "Hans de Goede" <hdegoede@redhat.com>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
Joel Selvaraj <joelselvaraj.oss@gmail.com>
Subject: [PATCH v5 3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen
Date: Sat, 01 Jun 2024 15:44:45 -0500 [thread overview]
Message-ID: <20240601-nvt-ts-devicetree-regulator-support-v5-3-aa9bf986347d@gmail.com> (raw)
In-Reply-To: <20240601-nvt-ts-devicetree-regulator-support-v5-0-aa9bf986347d@gmail.com>
From: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
---
drivers/input/touchscreen/novatek-nvt-ts.c | 67 +++++++++++++++++++++++++++---
1 file changed, 61 insertions(+), 6 deletions(-)
diff --git a/drivers/input/touchscreen/novatek-nvt-ts.c b/drivers/input/touchscreen/novatek-nvt-ts.c
index 9bee3a0c122fb..b9ff97bf4d880 100644
--- a/drivers/input/touchscreen/novatek-nvt-ts.c
+++ b/drivers/input/touchscreen/novatek-nvt-ts.c
@@ -31,9 +31,6 @@
#define NVT_TS_PARAMS_CHIP_ID 0x0e
#define NVT_TS_PARAMS_SIZE 0x0f
-#define NVT_TS_SUPPORTED_WAKE_TYPE 0x05
-#define NVT_TS_SUPPORTED_CHIP_ID 0x05
-
#define NVT_TS_MAX_TOUCHES 10
#define NVT_TS_MAX_SIZE 4096
@@ -51,10 +48,16 @@ static const int nvt_ts_irq_type[4] = {
IRQF_TRIGGER_HIGH
};
+struct nvt_ts_i2c_chip_data {
+ u8 wake_type;
+ u8 chip_id;
+};
+
struct nvt_ts_data {
struct i2c_client *client;
struct input_dev *input;
struct gpio_desc *reset_gpio;
+ struct regulator_bulk_data regulators[2];
struct touchscreen_properties prop;
int max_touches;
u8 buf[NVT_TS_TOUCH_SIZE * NVT_TS_MAX_TOUCHES];
@@ -142,6 +145,13 @@ static irqreturn_t nvt_ts_irq(int irq, void *dev_id)
static int nvt_ts_start(struct input_dev *dev)
{
struct nvt_ts_data *data = input_get_drvdata(dev);
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators);
+ if (error) {
+ dev_err(&data->client->dev, "failed to enable regulators\n");
+ return error;
+ }
enable_irq(data->client->irq);
gpiod_set_value_cansleep(data->reset_gpio, 0);
@@ -155,6 +165,7 @@ static void nvt_ts_stop(struct input_dev *dev)
disable_irq(data->client->irq);
gpiod_set_value_cansleep(data->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
}
static int nvt_ts_suspend(struct device *dev)
@@ -188,6 +199,7 @@ static int nvt_ts_probe(struct i2c_client *client)
struct device *dev = &client->dev;
int error, width, height, irq_type;
struct nvt_ts_data *data;
+ const struct nvt_ts_i2c_chip_data *chip;
struct input_dev *input;
if (!client->irq) {
@@ -199,12 +211,35 @@ static int nvt_ts_probe(struct i2c_client *client)
if (!data)
return -ENOMEM;
+ chip = device_get_match_data(&client->dev);
+ if (!chip)
+ return -EINVAL;
+
data->client = client;
i2c_set_clientdata(client, data);
+ /*
+ * VCC is the analog voltage supply
+ * IOVCC is the digital voltage supply
+ */
+ data->regulators[0].supply = "vcc";
+ data->regulators[1].supply = "iovcc";
+ error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), data->regulators);
+ if (error) {
+ dev_err(dev, "cannot get regulators: %d\n", error);
+ return error;
+ }
+
+ error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators);
+ if (error) {
+ dev_err(dev, "failed to enable regulators: %d\n", error);
+ return error;
+ }
+
data->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
error = PTR_ERR_OR_ZERO(data->reset_gpio);
if (error) {
+ regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
dev_err(dev, "failed to request reset GPIO: %d\n", error);
return error;
}
@@ -214,6 +249,7 @@ static int nvt_ts_probe(struct i2c_client *client)
error = nvt_ts_read_data(data->client, NVT_TS_PARAMETERS_START,
data->buf, NVT_TS_PARAMS_SIZE);
gpiod_set_value_cansleep(data->reset_gpio, 1); /* Put back in reset */
+ regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
if (error)
return error;
@@ -225,8 +261,8 @@ static int nvt_ts_probe(struct i2c_client *client)
if (width > NVT_TS_MAX_SIZE || height >= NVT_TS_MAX_SIZE ||
data->max_touches > NVT_TS_MAX_TOUCHES ||
irq_type >= ARRAY_SIZE(nvt_ts_irq_type) ||
- data->buf[NVT_TS_PARAMS_WAKE_TYPE] != NVT_TS_SUPPORTED_WAKE_TYPE ||
- data->buf[NVT_TS_PARAMS_CHIP_ID] != NVT_TS_SUPPORTED_CHIP_ID) {
+ data->buf[NVT_TS_PARAMS_WAKE_TYPE] != chip->wake_type ||
+ data->buf[NVT_TS_PARAMS_CHIP_ID] != chip->chip_id) {
dev_err(dev, "Unsupported touchscreen parameters: %*ph\n",
NVT_TS_PARAMS_SIZE, data->buf);
return -EIO;
@@ -277,8 +313,26 @@ static int nvt_ts_probe(struct i2c_client *client)
return 0;
}
+static const struct nvt_ts_i2c_chip_data nvt_nt11205_ts_data = {
+ .wake_type = 0x05,
+ .chip_id = 0x05,
+};
+
+static const struct nvt_ts_i2c_chip_data nvt_nt36672a_ts_data = {
+ .wake_type = 0x01,
+ .chip_id = 0x08,
+};
+
+static const struct of_device_id nvt_ts_of_match[] = {
+ { .compatible = "novatek,nt11205-ts", .data = &nvt_nt11205_ts_data },
+ { .compatible = "novatek,nt36672a-ts", .data = &nvt_nt36672a_ts_data },
+ { }
+};
+MODULE_DEVICE_TABLE(of, nvt_ts_of_match);
+
static const struct i2c_device_id nvt_ts_i2c_id[] = {
- { "nt11205-ts" },
+ { "nt11205-ts", (unsigned long) &nvt_nt11205_ts_data },
+ { "nt36672a-ts", (unsigned long) &nvt_nt36672a_ts_data },
{ }
};
MODULE_DEVICE_TABLE(i2c, nvt_ts_i2c_id);
@@ -287,6 +341,7 @@ static struct i2c_driver nvt_ts_driver = {
.driver = {
.name = "novatek-nvt-ts",
.pm = pm_sleep_ptr(&nvt_ts_pm_ops),
+ .of_match_table = nvt_ts_of_match,
},
.probe = nvt_ts_probe,
.id_table = nvt_ts_i2c_id,
--
2.45.1
next prev parent reply other threads:[~2024-06-01 20:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-01 20:44 [PATCH v5 0/3] novatek-nvt-ts: add support for NT36672A touchscreen Joel Selvaraj via B4 Relay
2024-06-01 20:44 ` [PATCH v5 1/3] Input: novatek-nvt-ts: replace generic i2c device id with specific IC variant Joel Selvaraj via B4 Relay
2024-06-02 13:11 ` Hans de Goede
2024-06-02 13:23 ` Hans de Goede
2024-06-01 20:44 ` [PATCH v5 2/3] dt-bindings: input: document Novatek NVT touchscreen controller Joel Selvaraj via B4 Relay
2024-06-01 20:44 ` Joel Selvaraj via B4 Relay [this message]
2024-06-02 13:12 ` [PATCH v5 3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen Hans de Goede
2024-09-28 5:45 ` [PATCH v5 0/3] " Joel Selvaraj
2024-09-28 7:49 ` Krzysztof Kozlowski
2024-09-28 19:50 ` Joel Selvaraj
2024-09-30 2:14 ` Dmitry Torokhov
2024-09-30 19:56 ` Joel Selvaraj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240601-nvt-ts-devicetree-regulator-support-v5-3-aa9bf986347d@gmail.com \
--to=devnull+joelselvaraj.oss.gmail.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=joelselvaraj.oss@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).