[PATCH AUTOSEL 6.9 10/23] platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline

[PATCH AUTOSEL 6.9 10/23] platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0b178b02673998f5acca5a0365a8858ca45beedb ]

On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.

touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.

ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.

Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.

Cc: Gregor Riepl <onitake@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240523143601.47555-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         | 22 ++++++
 drivers/platform/x86/touchscreen_dmi.c        | 79 ++++++++++++++++++-
 2 files changed, 98 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 396137ee018d7..f824168382d50 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1899,6 +1899,28 @@
 				Format:
 				<bus_id>,<clkrate>
 
+	i2c_touchscreen_props= [HW,ACPI,X86]
+			Set device-properties for ACPI-enumerated I2C-attached
+			touchscreen, to e.g. fix coordinates of upside-down
+			mounted touchscreens. If you need this option please
+			submit a drivers/platform/x86/touchscreen_dmi.c patch
+			adding a DMI quirk for this.
+
+			Format:
+			<ACPI_HW_ID>:<prop_name>=<val>[:prop_name=val][:...]
+			Where <val> is one of:
+			Omit "=<val>" entirely	Set a boolean device-property
+			Unsigned number		Set a u32 device-property
+			Anything else		Set a string device-property
+
+			Examples (split over multiple lines):
+			i2c_touchscreen_props=GDIX1001:touchscreen-inverted-x:
+			touchscreen-inverted-y
+
+			i2c_touchscreen_props=MSSL1680:touchscreen-size-x=1920:
+			touchscreen-size-y=1080:touchscreen-inverted-y:
+			firmware-name=gsl1680-vendor-model.fw:silead,home-button
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.unmask_kbd_data
 			[HW] Enable printing of interrupt data from the KBD port
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index c6a10ec2c83f6..b021fb9e579e8 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -9,10 +9,13 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/ctype.h>
 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/efi_embedded_fw.h>
 #include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kstrtox.h>
 #include <linux/notifier.h>
 #include <linux/property.h>
 #include <linux/string.h>
@@ -1817,7 +1820,7 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 	{ }
 };
 
-static const struct ts_dmi_data *ts_data;
+static struct ts_dmi_data *ts_data;
 
 static void ts_dmi_add_props(struct i2c_client *client)
 {
@@ -1852,6 +1855,64 @@ static int ts_dmi_notifier_call(struct notifier_block *nb,
 	return 0;
 }
 
+#define MAX_CMDLINE_PROPS 16
+
+static struct property_entry ts_cmdline_props[MAX_CMDLINE_PROPS + 1];
+
+static struct ts_dmi_data ts_cmdline_data = {
+	.properties = ts_cmdline_props,
+};
+
+static int __init ts_parse_props(char *str)
+{
+	/* Save the original str to show it on syntax errors */
+	char orig_str[256];
+	char *name, *value;
+	u32 u32val;
+	int i, ret;
+
+	strscpy(orig_str, str, sizeof(orig_str));
+
+	/*
+	 * str is part of the static_command_line from init/main.c and poking
+	 * holes in that by writing 0 to it is allowed, as is taking long
+	 * lasting references to it.
+	 */
+	ts_cmdline_data.acpi_name = strsep(&str, ":");
+
+	for (i = 0; i < MAX_CMDLINE_PROPS; i++) {
+		name = strsep(&str, ":");
+		if (!name || !name[0])
+			break;
+
+		/* Replace '=' with 0 and make value point past '=' or NULL */
+		value = name;
+		strsep(&value, "=");
+		if (!value) {
+			ts_cmdline_props[i] = PROPERTY_ENTRY_BOOL(name);
+		} else if (isdigit(value[0])) {
+			ret = kstrtou32(value, 0, &u32val);
+			if (ret)
+				goto syntax_error;
+
+			ts_cmdline_props[i] = PROPERTY_ENTRY_U32(name, u32val);
+		} else {
+			ts_cmdline_props[i] = PROPERTY_ENTRY_STRING(name, value);
+		}
+	}
+
+	if (!i || str)
+		goto syntax_error;
+
+	ts_data = &ts_cmdline_data;
+	return 1;
+
+syntax_error:
+	pr_err("Invalid '%s' value for 'i2c_touchscreen_props='\n", orig_str);
+	return 1; /* "i2c_touchscreen_props=" is still a known parameter */
+}
+__setup("i2c_touchscreen_props=", ts_parse_props);
+
 static struct notifier_block ts_dmi_notifier = {
 	.notifier_call = ts_dmi_notifier_call,
 };
@@ -1859,13 +1920,25 @@ static struct notifier_block ts_dmi_notifier = {
 static int __init ts_dmi_init(void)
 {
 	const struct dmi_system_id *dmi_id;
+	struct ts_dmi_data *ts_data_dmi;
 	int error;
 
 	dmi_id = dmi_first_match(touchscreen_dmi_table);
-	if (!dmi_id)
+	ts_data_dmi = dmi_id ? dmi_id->driver_data : NULL;
+
+	if (ts_data) {
+		/*
+		 * Kernel cmdline provided data takes precedence, copy over
+		 * DMI efi_embedded_fw info if available.
+		 */
+		if (ts_data_dmi)
+			ts_data->embedded_fw = ts_data_dmi->embedded_fw;
+	} else if (ts_data_dmi) {
+		ts_data = ts_data_dmi;
+	} else {
 		return 0; /* Not an error */
+	}
 
-	ts_data = dmi_id->driver_data;
 	/* Some dmi table entries only provide an efi_embedded_fw_desc */
 	if (!ts_data->properties)
 		return 0;
-- 
2.43.0

[PATCH AUTOSEL 6.9 11/23] platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet

[Sasha Levin]

From: hmtheboy154 <buingoc67@gmail.com>

[ Upstream commit 7c8639aa41343fd7b3dbe09baf6b0791fcc407a1 ]

This is a tablet created by GlobalSpace Technologies Limited
which uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage.

Link: https://web.archive.org/web/20171102141952/http://globalspace.in/11.6-device.html
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index b021fb9e579e8..6c03e7daadd4d 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -900,6 +900,22 @@ static const struct ts_dmi_data schneider_sct101ctm_data = {
 	.properties	= schneider_sct101ctm_props,
 };
 
+static const struct property_entry globalspace_solt_ivw116_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 7),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 22),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1723),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1077),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-globalspace-solt-ivw116.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data globalspace_solt_ivw116_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= globalspace_solt_ivw116_props,
+};
+
 static const struct property_entry techbite_arc_11_6_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 5),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 7),
@@ -1627,6 +1643,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "SCT101CTM"),
 		},
 	},
+	{
+		/* GlobalSpace SoLT IVW 11.6" */
+		.driver_data = (void *)&globalspace_solt_ivw116_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Globalspace Tech Pvt Ltd"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SolTIVW"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "PN20170413488"),
+		},
+	},
 	{
 		/* Techbite Arc 11.6 */
 		.driver_data = (void *)&techbite_arc_11_6_data,
-- 
2.43.0

[PATCH AUTOSEL 6.9 12/23] platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro

[Sasha Levin]

From: hmtheboy154 <buingoc67@gmail.com>

[ Upstream commit 3050052613790e75b5e4a8536930426b0a8b0774 ]

The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.

Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 6c03e7daadd4d..2d9ca2292ea19 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -1404,6 +1404,17 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_DATE, "04/24/2018"),
 		},
 	},
+	{
+		/* Jumper EZpad 6s Pro */
+		.driver_data = (void *)&jumper_ezpad_6_pro_b_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Ezpad"),
+			/* Above matches are too generic, add bios match */
+			DMI_MATCH(DMI_BIOS_VERSION, "E.WSA116_8.E1.042.bin"),
+			DMI_MATCH(DMI_BIOS_DATE, "01/08/2020"),
+		},
+	},
 	{
 		/* Jumper EZpad 6 m4 */
 		.driver_data = (void *)&jumper_ezpad_6_m4_data,
-- 
2.43.0