From: Felix Kaechele <felix@kaechele.ca>
To: Job Noorman <job@noorman.info>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/5] input: himax_hx83112b: use more descriptive register defines
Date: Thu, 20 Jun 2024 10:50:03 -0400 [thread overview]
Message-ID: <20240620145019.156187-3-felix@kaechele.ca> (raw)
In-Reply-To: <20240620145019.156187-1-felix@kaechele.ca>
Himax uses an AHB-style bus to communicate with different parts of the
display driver and touch controller system.
Use more descriptive names for the register and address defines.
The names were taken from a driver submission for the similar HX83102J
chip.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/all/TY0PR06MB561105A3386E9D76F429110D9E0F2@TY0PR06MB5611.apcprd06.prod.outlook.com/
---
drivers/input/touchscreen/himax_hx83112b.c | 23 ++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/input/touchscreen/himax_hx83112b.c b/drivers/input/touchscreen/himax_hx83112b.c
index bafabd06dabc..d6c4a68eac23 100644
--- a/drivers/input/touchscreen/himax_hx83112b.c
+++ b/drivers/input/touchscreen/himax_hx83112b.c
@@ -24,12 +24,14 @@
#define HIMAX_MAX_POINTS 10
-#define HIMAX_REG_CFG_SET_ADDR 0x00
-#define HIMAX_REG_CFG_INIT_READ 0x0c
-#define HIMAX_REG_CFG_READ_VALUE 0x08
-#define HIMAX_REG_READ_EVENT 0x30
+#define HIMAX_AHB_ADDR_BYTE_0 0x00
+#define HIMAX_AHB_ADDR_RDATA_BYTE_0 0x08
+#define HIMAX_AHB_ADDR_ACCESS_DIRECTION 0x0c
+#define HIMAX_AHB_ADDR_EVENT_STACK 0x30
-#define HIMAX_CFG_PRODUCT_ID 0x900000d0
+#define HIMAX_AHB_CMD_ACCESS_DIRECTION_READ 0x00
+
+#define HIMAX_REG_ADDR_ICID 0x900000d0
#define HIMAX_INVALID_COORD 0xffff
@@ -67,15 +69,16 @@ static int himax_read_config(struct himax_ts_data *ts, u32 address, u32 *dst)
{
int error;
- error = regmap_write(ts->regmap, HIMAX_REG_CFG_SET_ADDR, address);
+ error = regmap_write(ts->regmap, HIMAX_AHB_ADDR_BYTE_0, address);
if (error)
return error;
- error = regmap_write(ts->regmap, HIMAX_REG_CFG_INIT_READ, 0x0);
+ error = regmap_write(ts->regmap, HIMAX_AHB_ADDR_ACCESS_DIRECTION,
+ HIMAX_AHB_CMD_ACCESS_DIRECTION_READ);
if (error)
return error;
- error = regmap_read(ts->regmap, HIMAX_REG_CFG_READ_VALUE, dst);
+ error = regmap_read(ts->regmap, HIMAX_AHB_ADDR_RDATA_BYTE_0, dst);
if (error)
return error;
@@ -101,7 +104,7 @@ static int himax_read_product_id(struct himax_ts_data *ts, u32 *product_id)
{
int error;
- error = himax_read_config(ts, HIMAX_CFG_PRODUCT_ID, product_id);
+ error = himax_read_config(ts, HIMAX_REG_ADDR_ICID, product_id);
if (error)
return error;
@@ -235,7 +238,7 @@ static int himax_handle_input(struct himax_ts_data *ts)
int error;
struct himax_event event;
- error = regmap_raw_read(ts->regmap, HIMAX_REG_READ_EVENT, &event,
+ error = regmap_raw_read(ts->regmap, HIMAX_AHB_ADDR_EVENT_STACK, &event,
sizeof(event));
if (error) {
dev_err(&ts->client->dev, "Failed to read input event: %d\n",
--
2.45.2
next prev parent reply other threads:[~2024-06-20 14:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-20 14:50 [PATCH v3 0/5] himax_hx83112b: add support for HX83100A Felix Kaechele
2024-06-20 14:50 ` [PATCH v3 1/5] dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A Felix Kaechele
2024-06-20 14:50 ` Felix Kaechele [this message]
2024-06-20 14:50 ` [PATCH v3 3/5] input: himax_hx83112b: implement MCU register reading Felix Kaechele
2024-06-20 14:50 ` [PATCH v3 4/5] input: himax_hx83112b: add himax_chip struct for multi-chip support Felix Kaechele
2024-06-20 14:50 ` [PATCH v3 5/5] input: himax_hx83112b: add support for HX83100A Felix Kaechele
2024-07-08 23:16 ` [PATCH v3 0/5] " Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240620145019.156187-3-felix@kaechele.ca \
--to=felix@kaechele.ca \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=job@noorman.info \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).