* [PATCH 2/3] Input: i8042 - Add another board name for TUXEDO Stellaris Gen5 AMD line
[not found] <20240910094008.1601230-1-wse@tuxedocomputers.com>
@ 2024-09-10 9:40 ` Werner Sembach
2024-09-10 9:40 ` [PATCH 3/3] Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table Werner Sembach
1 sibling, 0 replies; 2+ messages in thread
From: Werner Sembach @ 2024-09-10 9:40 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Werner Sembach, linux-input, linux-kernel
There might be devices out in the wild where the board name is GMxXGxx
instead of GMxXGxX.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
drivers/input/serio/i8042-acpipnpio.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 1d73391f127bc..d16072b82d957 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1136,6 +1136,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "GMxXGxx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "GMxXGxX"),
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 3/3] Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
[not found] <20240910094008.1601230-1-wse@tuxedocomputers.com>
2024-09-10 9:40 ` [PATCH 2/3] Input: i8042 - Add another board name for TUXEDO Stellaris Gen5 AMD line Werner Sembach
@ 2024-09-10 9:40 ` Werner Sembach
1 sibling, 0 replies; 2+ messages in thread
From: Werner Sembach @ 2024-09-10 9:40 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Werner Sembach, linux-input, linux-kernel
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
drivers/input/serio/i8042-acpipnpio.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index d16072b82d957..34d1f07ea4c30 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1150,6 +1150,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
/*
* A lot of modern Clevo barebones have touchpad and/or keyboard issues
* after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread