[PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format

[PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format

[Frank Li]

Fixed below warnings:

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu: failed to match any schema with compatible: ['zii,rave-sp-rdu2']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/watchdog: failed to match any schema with compatible: ['zii,rave-sp-watchdog']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/backlight: failed to match any schema with compatible: ['zii,rave-sp-backlight']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/pwrbutton: failed to match any schema with compatible: ['zii,rave-sp-pwrbutton']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a3: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a4: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu: failed to match any schema with compatible: ['zii,rave-sp-rdu2']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/watchdog: failed to match any schema with compatible: ['zii,rave-sp-watchdog']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/backlight: failed to match any schema with compatible: ['zii,rave-sp-backlight']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/pwrbutton: failed to match any schema with compatible: ['zii,rave-sp-pwrbutton']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a3: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a4: failed to match any schema with compatible: ['zii,rave-sp-eeprom']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v2:
- change all maintainer to frank li.
- Link to v1: https://lore.kernel.org/r/20241008-zii_yaml-v1-0-d06ba7e26225@nxp.com

---
Frank Li (5):
      dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
      dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
      dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
      dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
      dt-bindings: mfd: convert zii,rave-sp.txt to yaml format

 .../bindings/input/zii,rave-sp-pwrbutton.txt       | 22 --------
 .../bindings/input/zii,rave-sp-pwrbutton.yaml      | 36 +++++++++++++
 .../leds/backlight/zii,rave-sp-backlight.txt       | 23 --------
 .../leds/backlight/zii,rave-sp-backlight.yaml      | 36 +++++++++++++
 .../devicetree/bindings/mfd/zii,rave-sp.txt        | 39 --------------
 .../devicetree/bindings/mfd/zii,rave-sp.yaml       | 63 ++++++++++++++++++++++
 .../bindings/nvmem/zii,rave-sp-eeprom.txt          | 40 --------------
 .../bindings/nvmem/zii,rave-sp-eeprom.yaml         | 54 +++++++++++++++++++
 .../bindings/watchdog/zii,rave-sp-wdt.txt          | 39 --------------
 .../bindings/watchdog/zii,rave-sp-wdt.yaml         | 47 ++++++++++++++++
 10 files changed, 236 insertions(+), 163 deletions(-)
---
base-commit: 2c1dd8a45abe738d15a9ebe015a17eeac9a3b13f
change-id: 20241008-zii_yaml-7b4802029873

Best regards,
---
Frank Li <Frank.Li@nxp.com>

[PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml

[Frank Li]

Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
Additional changes:
- add ref to input.yaml.
- remove mfd node in example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/input/zii,rave-sp-pwrbutton.txt       | 22 -------------
 .../bindings/input/zii,rave-sp-pwrbutton.yaml      | 36 ++++++++++++++++++++++
 2 files changed, 36 insertions(+), 22 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
deleted file mode 100644
index 43ef770dfeb91..0000000000000
--- a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
-
-RAVE SP input device is a "MFD cell" device corresponding to power
-button functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-pwrbutton"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-	}
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml
new file mode 100644
index 0000000000000..b26e6fe174f22
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+description:
+  RAVE SP input device is a "MFD cell" device corresponding to power
+  button functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-pwrbutton
+
+required:
+  - compatible
+
+allOf:
+  - $ref: input.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwrbutton {
+        compatible = "zii,rave-sp-pwrbutton";
+    };
+

-- 
2.34.1

Re: [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:38 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
> Additional changes:
> - add ref to input.yaml.
> - remove mfd node in example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/input/zii,rave-sp-pwrbutton.txt       | 22 -------------
>  .../bindings/input/zii,rave-sp-pwrbutton.yaml      | 36 ++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 22 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml
Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241010-zii_yaml-v2-1-0ab730607422@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:38 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
> Additional changes:
> - add ref to input.yaml.
> - remove mfd node in example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/input/zii,rave-sp-pwrbutton.txt       | 22 -------------
>  .../bindings/input/zii,rave-sp-pwrbutton.yaml      | 36 ++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 22 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml

[Frank Li]

Convert device tree binding doc zii,rave-sp-backlight.txt to yaml format.
Additional Changes:
- Remove mfd parent node at example.
- Ref to backlight's common.yaml

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../leds/backlight/zii,rave-sp-backlight.txt       | 23 --------------
 .../leds/backlight/zii,rave-sp-backlight.yaml      | 36 ++++++++++++++++++++++
 2 files changed, 36 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
deleted file mode 100644
index ff5c921386502..0000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings
-
-RAVE SP backlight device is a "MFD cell" device corresponding to
-backlight functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-backlight"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		backlight {
-			compatible = "zii,rave-sp-backlight";
-		};
-	}
-
diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml
new file mode 100644
index 0000000000000..ee93a3e64852a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/zii,rave-sp-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Backlight
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE SP backlight device is a "MFD cell" device corresponding to
+  backlight functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-backlight
+
+required:
+  - compatible
+
+allOf:
+  - $ref: common.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "zii,rave-sp-backlight";
+    };
+

-- 
2.34.1

Re: [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:39 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-backlight.txt to yaml format.
> Additional Changes:
> - Remove mfd parent node at example.
> - Ref to backlight's common.yaml
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../leds/backlight/zii,rave-sp-backlight.txt       | 23 --------------
>  .../leds/backlight/zii,rave-sp-backlight.yaml      | 36 ++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 23 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml
Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241010-zii_yaml-v2-2-0ab730607422@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:39 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-backlight.txt to yaml format.
> Additional Changes:
> - Remove mfd parent node at example.
> - Ref to backlight's common.yaml
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../leds/backlight/zii,rave-sp-backlight.txt       | 23 --------------
>  .../leds/backlight/zii,rave-sp-backlight.yaml      | 36 ++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 23 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml

[Daniel Thompson]

On Thu, Oct 10, 2024 at 11:42:39AM -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-backlight.txt to yaml format.
> Additional Changes:
> - Remove mfd parent node at example.
> - Ref to backlight's common.yaml
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.

Re: (subset) [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml

[Lee Jones]

On Thu, 10 Oct 2024 11:42:39 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-backlight.txt to yaml format.
> Additional Changes:
> - Remove mfd parent node at example.
> - Ref to backlight's common.yaml
> 
> 

Applied, thanks!

[2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
      commit: 0eda30af58809224d80dc3bf3f368fc677fe8c08

--
Lee Jones [李琼斯]

[PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format

[Frank Li]

Convert device tree binding doc zii,rave-sp-eeprom.txt to yaml format.
Additional changes:
- Add ref to nvme.yaml.
- Add reg property.
- Remove mfd at example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/nvmem/zii,rave-sp-eeprom.txt          | 40 ----------------
 .../bindings/nvmem/zii,rave-sp-eeprom.yaml         | 54 ++++++++++++++++++++++
 2 files changed, 54 insertions(+), 40 deletions(-)

diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
deleted file mode 100644
index 0df79d9e07ec2..0000000000000
--- a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Zodiac Inflight Innovations RAVE EEPROM Bindings
-
-RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM
-attached to RAVE Supervisory Processor. It is expected that its Device
-Tree node is specified as a child of the node corresponding to the
-parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-eeprom"
-
-Optional properties:
-
-- zii,eeprom-name: Unique EEPROM identifier describing its function in the
-  system. Will be used as created NVMEM deivce's name.
-
-Data cells:
-
-Data cells are child nodes of eerpom node, bindings for which are
-documented in Documentation/devicetree/bindings/nvmem/nvmem.txt
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		eeprom@a4 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-
-			wdt_timeout: wdt-timeout@81 {
-				reg = <0x81 2>;
-			};
-		};
-	}
diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml
new file mode 100644
index 0000000000000..d073c51c2b9a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/zii,rave-sp-eeprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE EEPROM
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM
+  attached to RAVE Supervisory Processor. It is expected that its Device
+  Tree node is specified as a child of the node corresponding to the
+  parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-eeprom
+
+  reg:
+    maxItems: 1
+
+  zii,eeprom-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Unique EEPROM identifier describing its function in the
+      system. Will be used as created NVMEM deivce's name.
+
+required:
+  - compatible
+
+allOf:
+  - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eeprom@a4 {
+        compatible = "zii,rave-sp-eeprom";
+        reg = <0xa4 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        zii,eeprom-name = "main-eeprom";
+
+        wdt-timeout@81 {
+            reg = <0x81 2>;
+        };
+    };
+

-- 
2.34.1

Re: [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:40 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-eeprom.txt to yaml format.
> Additional changes:
> - Add ref to nvme.yaml.
> - Add reg property.
> - Remove mfd at example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/nvmem/zii,rave-sp-eeprom.txt          | 40 ----------------
>  .../bindings/nvmem/zii,rave-sp-eeprom.yaml         | 54 ++++++++++++++++++++++
>  2 files changed, 54 insertions(+), 40 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml
Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241010-zii_yaml-v2-3-0ab730607422@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:40 -0400, Frank Li wrote:
> Convert device tree binding doc zii,rave-sp-eeprom.txt to yaml format.
> Additional changes:
> - Add ref to nvme.yaml.
> - Add reg property.
> - Remove mfd at example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/nvmem/zii,rave-sp-eeprom.txt          | 40 ----------------
>  .../bindings/nvmem/zii,rave-sp-eeprom.yaml         | 54 ++++++++++++++++++++++
>  2 files changed, 54 insertions(+), 40 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format

[Frank Li]

Convert device binding doc zii,rave-sp-wdt.txt to yaml format.
Additional changes:
- Ref to watchdog.yaml.
- Remove mfd node in example.
- Remove eeprom part in example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/watchdog/zii,rave-sp-wdt.txt          | 39 ------------------
 .../bindings/watchdog/zii,rave-sp-wdt.yaml         | 47 ++++++++++++++++++++++
 2 files changed, 47 insertions(+), 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
deleted file mode 100644
index 3de96186e92e6..0000000000000
--- a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings
-
-RAVE SP watchdog device is a "MFD cell" device corresponding to
-watchdog functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Depending on wire protocol implemented by RAVE SP
-  firmware, should be one of:
-	- "zii,rave-sp-watchdog"
-	- "zii,rave-sp-watchdog-legacy"
-
-Optional properties:
-
-- wdt-timeout:	Two byte nvmem cell specified as per
-		Documentation/devicetree/bindings/nvmem/nvmem.txt
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		eeprom {
-			wdt_timeout: wdt-timeout@8E {
-				reg = <0x8E 2>;
-			};
-		};
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-			nvmem-cells = <&wdt_timeout>;
-			nvmem-cell-names = "wdt-timeout";
-		};
-	}
-
diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml
new file mode 100644
index 0000000000000..de0d56725dd40
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/zii,rave-sp-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE SP watchdog device is a "MFD cell" device corresponding to
+  watchdog functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    enum:
+      - zii,rave-sp-watchdog
+      - zii,rave-sp-watchdog-legacy
+
+  nvmem-cell-names:
+    items:
+      - const: wdt_timeout
+
+  nvmem-cells:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: watchdog.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+        compatible = "zii,rave-sp-watchdog";
+        nvmem-cells = <&wdt_timeout>;
+        nvmem-cell-names = "wdt_timeout";
+    };
+

-- 
2.34.1

Re: [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:41 -0400, Frank Li wrote:
> Convert device binding doc zii,rave-sp-wdt.txt to yaml format.
> Additional changes:
> - Ref to watchdog.yaml.
> - Remove mfd node in example.
> - Remove eeprom part in example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/watchdog/zii,rave-sp-wdt.txt          | 39 ------------------
>  .../bindings/watchdog/zii,rave-sp-wdt.yaml         | 47 ++++++++++++++++++++++
>  2 files changed, 47 insertions(+), 39 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml
Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml: Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241010-zii_yaml-v2-4-0ab730607422@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:41 -0400, Frank Li wrote:
> Convert device binding doc zii,rave-sp-wdt.txt to yaml format.
> Additional changes:
> - Ref to watchdog.yaml.
> - Remove mfd node in example.
> - Remove eeprom part in example.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/watchdog/zii,rave-sp-wdt.txt          | 39 ------------------
>  .../bindings/watchdog/zii,rave-sp-wdt.yaml         | 47 ++++++++++++++++++++++
>  2 files changed, 47 insertions(+), 39 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format

[Frank Li]

Convert device binding doc zii,rave-sp.txt to yaml format.
Additional change:
- ref to other zii yaml files.
- remove rave-sp-hwmon and rave-sp-leds.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../devicetree/bindings/mfd/zii,rave-sp.txt        | 39 --------------
 .../devicetree/bindings/mfd/zii,rave-sp.yaml       | 63 ++++++++++++++++++++++
 2 files changed, 63 insertions(+), 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
deleted file mode 100644
index e0f901edc0635..0000000000000
--- a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor
-
-RAVE Supervisory Processor communicates with SoC over UART. It is
-expected that its Device Tree node is specified as a child of a node
-corresponding to UART controller used for communication.
-
-Required parent device properties:
-
- - compatible: Should be one of:
-	- "zii,rave-sp-niu"
-	- "zii,rave-sp-mezz"
-	- "zii,rave-sp-esb"
-	- "zii,rave-sp-rdu1"
-	- "zii,rave-sp-rdu2"
-
- - current-speed: Should be set to baud rate SP device is using
-
-RAVE SP consists of the following sub-devices:
-
-Device				 Description
-------				 -----------
-rave-sp-wdt			: Watchdog
-rave-sp-nvmem			: Interface to onboard EEPROM
-rave-sp-backlight		: Display backlight
-rave-sp-hwmon			: Interface to onboard hardware sensors
-rave-sp-leds			: Interface to onboard LEDs
-rave-sp-input			: Interface to onboard power button
-
-Example of usage:
-
-	rdu {
-		compatible = "zii,rave-sp-rdu2";
-		current-speed = <1000000>;
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml b/Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml
new file mode 100644
index 0000000000000..1d078c5ef1689
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/zii,rave-sp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE Supervisory Processor communicates with SoC over UART. It is
+  expected that its Device Tree node is specified as a child of a node
+  corresponding to UART controller used for communication.
+
+properties:
+  compatible:
+    enum:
+      - zii,rave-sp-niu
+      - zii,rave-sp-mezz
+      - zii,rave-sp-esb
+      - zii,rave-sp-rdu1
+      - zii,rave-sp-rdu2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  watchdog:
+    $ref: /schemas/watchdog/zii,rave-sp-wdt.yaml
+
+  backlight:
+    $ref: /schemas/leds/backlight/zii,rave-sp-backlight.yaml
+
+  pwrbutton:
+    $ref: /schemas/input/zii,rave-sp-pwrbutton.yaml
+
+patternProperties:
+  '^eeprom@[0-9a-f]+$':
+    $ref: /schemas/nvmem/zii,rave-sp-eeprom.yaml
+
+required:
+  - compatible
+
+allOf:
+  - $ref: /schemas/serial/serial-peripheral-props.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mfd {
+        compatible = "zii,rave-sp-rdu2";
+        current-speed = <1000000>;
+
+        watchdog {
+            compatible = "zii,rave-sp-watchdog";
+        };
+    };
+

-- 
2.34.1

Re: [PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format

[Rob Herring (Arm)]

On Thu, 10 Oct 2024 11:42:42 -0400, Frank Li wrote:
> Convert device binding doc zii,rave-sp.txt to yaml format.
> Additional change:
> - ref to other zii yaml files.
> - remove rave-sp-hwmon and rave-sp-leds.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../devicetree/bindings/mfd/zii,rave-sp.txt        | 39 --------------
>  .../devicetree/bindings/mfd/zii,rave-sp.yaml       | 63 ++++++++++++++++++++++
>  2 files changed, 63 insertions(+), 39 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: (subset) [PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format

[Lee Jones]

On Thu, 10 Oct 2024 11:42:42 -0400, Frank Li wrote:
> Convert device binding doc zii,rave-sp.txt to yaml format.
> Additional change:
> - ref to other zii yaml files.
> - remove rave-sp-hwmon and rave-sp-leds.
> 
> 

Applied, thanks!

[5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format
      commit: f4b00ab2c29960961f9641be8f3e8ba4960fd849

--
Lee Jones [李琼斯]

Re: (subset) [PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format

[Srinivas Kandagatla]

On Thu, 10 Oct 2024 11:42:37 -0400, Frank Li wrote:
> Fixed below warnings:
> 
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu: failed to match any schema with compatible: ['zii,rave-sp-rdu2']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/watchdog: failed to match any schema with compatible: ['zii,rave-sp-watchdog']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/backlight: failed to match any schema with compatible: ['zii,rave-sp-backlight']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/pwrbutton: failed to match any schema with compatible: ['zii,rave-sp-pwrbutton']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a3: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a4: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu: failed to match any schema with compatible: ['zii,rave-sp-rdu2']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/watchdog: failed to match any schema with compatible: ['zii,rave-sp-watchdog']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/backlight: failed to match any schema with compatible: ['zii,rave-sp-backlight']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/pwrbutton: failed to match any schema with compatible: ['zii,rave-sp-pwrbutton']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a3: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a4: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> 
> [...]

Applied, thanks!

[3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
      commit: 17d6f058403d4e3458ec9c7dae607c065cabe089

Best regards,
-- 
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Re: [PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format

[Rob Herring]

On Thu, Oct 10, 2024 at 11:42:37AM -0400, Frank Li wrote:
> Fixed below warnings:
> 
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu: failed to match any schema with compatible: ['zii,rave-sp-rdu2']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/watchdog: failed to match any schema with compatible: ['zii,rave-sp-watchdog']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/backlight: failed to match any schema with compatible: ['zii,rave-sp-backlight']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/pwrbutton: failed to match any schema with compatible: ['zii,rave-sp-pwrbutton']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a3: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a4: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu: failed to match any schema with compatible: ['zii,rave-sp-rdu2']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/watchdog: failed to match any schema with compatible: ['zii,rave-sp-watchdog']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/backlight: failed to match any schema with compatible: ['zii,rave-sp-backlight']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/pwrbutton: failed to match any schema with compatible: ['zii,rave-sp-pwrbutton']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a3: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dtb: /soc@0/bus@30800000/serial@30890000/mcu/eeprom@a4: failed to match any schema with compatible: ['zii,rave-sp-eeprom']
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Changes in v2:
> - change all maintainer to frank li.
> - Link to v1: https://lore.kernel.org/r/20241008-zii_yaml-v1-0-d06ba7e26225@nxp.com
> 
> ---
> Frank Li (5):
>       dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
>       dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
>       dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
>       dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
>       dt-bindings: mfd: convert zii,rave-sp.txt to yaml format

Applied 1 and 4 since they still haven't been picked up and linux-next 
is warning due to the whole series not being applied. Once again, these 
MFD bindings need to go in via 1 tree.

Rob