From: Benjamin Tissoires <bentiss@kernel.org>
To: Jiri Kosina <jikos@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
Benjamin Tissoires <bentiss@kernel.org>,
Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Subject: [PATCH 1/2] HID: bpf: Fix NKRO on Mistel MD770
Date: Thu, 17 Oct 2024 17:35:40 +0200 [thread overview]
Message-ID: <20241017-import_bpf_6-13-v1-1-197d882ade37@kernel.org> (raw)
In-Reply-To: <20241017-import_bpf_6-13-v1-0-197d882ade37@kernel.org>
Mistel MD770 keyboard (using Holtek Semiconductor, Inc. controller) has
a quirk in report descriptor in one of its interfaces (more detail in
the source file). Fix up the descriptor to allow NKRO to work again.
Tested by loading the BPF program and confirming that 8 simultaneous
keypresses work.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218495
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/122
Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
drivers/hid/bpf/progs/Mistel__MD770.bpf.c | 154 ++++++++++++++++++++++++++++++
1 file changed, 154 insertions(+)
diff --git a/drivers/hid/bpf/progs/Mistel__MD770.bpf.c b/drivers/hid/bpf/progs/Mistel__MD770.bpf.c
new file mode 100644
index 0000000000000000000000000000000000000000..fb8b5a6968b125ed88a456aefb427ede0e0bfa9b
--- /dev/null
+++ b/drivers/hid/bpf/progs/Mistel__MD770.bpf.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tatsuyuki Ishi
+ */
+
+#include "vmlinux.h"
+#include "hid_bpf.h"
+#include "hid_bpf_helpers.h"
+#include <bpf/bpf_tracing.h>
+
+#define VID_HOLTEK 0x04D9
+#define PID_MD770 0x0339
+#define RDESC_SIZE 203
+
+HID_BPF_CONFIG(
+ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, VID_HOLTEK, PID_MD770)
+);
+
+/*
+ * The Mistel MD770 keyboard reports the first 6 simultaneous key presses
+ * through the first interface, and anything beyond that through a second
+ * interface. Unfortunately, the second interface's report descriptor has an
+ * error, causing events to be malformed and ignored. This HID-BPF driver
+ * fixes the descriptor to allow NKRO to work again.
+ *
+ * For reference, this is the original report descriptor:
+ *
+ * 0x05, 0x01, // Usage Page (Generic Desktop) 0
+ * 0x09, 0x80, // Usage (System Control) 2
+ * 0xa1, 0x01, // Collection (Application) 4
+ * 0x85, 0x01, // Report ID (1) 6
+ * 0x19, 0x81, // Usage Minimum (129) 8
+ * 0x29, 0x83, // Usage Maximum (131) 10
+ * 0x15, 0x00, // Logical Minimum (0) 12
+ * 0x25, 0x01, // Logical Maximum (1) 14
+ * 0x95, 0x03, // Report Count (3) 16
+ * 0x75, 0x01, // Report Size (1) 18
+ * 0x81, 0x02, // Input (Data,Var,Abs) 20
+ * 0x95, 0x01, // Report Count (1) 22
+ * 0x75, 0x05, // Report Size (5) 24
+ * 0x81, 0x01, // Input (Cnst,Arr,Abs) 26
+ * 0xc0, // End Collection 28
+ * 0x05, 0x0c, // Usage Page (Consumer Devices) 29
+ * 0x09, 0x01, // Usage (Consumer Control) 31
+ * 0xa1, 0x01, // Collection (Application) 33
+ * 0x85, 0x02, // Report ID (2) 35
+ * 0x15, 0x00, // Logical Minimum (0) 37
+ * 0x25, 0x01, // Logical Maximum (1) 39
+ * 0x95, 0x12, // Report Count (18) 41
+ * 0x75, 0x01, // Report Size (1) 43
+ * 0x0a, 0x83, 0x01, // Usage (AL Consumer Control Config) 45
+ * 0x0a, 0x8a, 0x01, // Usage (AL Email Reader) 48
+ * 0x0a, 0x92, 0x01, // Usage (AL Calculator) 51
+ * 0x0a, 0x94, 0x01, // Usage (AL Local Machine Browser) 54
+ * 0x09, 0xcd, // Usage (Play/Pause) 57
+ * 0x09, 0xb7, // Usage (Stop) 59
+ * 0x09, 0xb6, // Usage (Scan Previous Track) 61
+ * 0x09, 0xb5, // Usage (Scan Next Track) 63
+ * 0x09, 0xe2, // Usage (Mute) 65
+ * 0x09, 0xea, // Usage (Volume Down) 67
+ * 0x09, 0xe9, // Usage (Volume Up) 69
+ * 0x0a, 0x21, 0x02, // Usage (AC Search) 71
+ * 0x0a, 0x23, 0x02, // Usage (AC Home) 74
+ * 0x0a, 0x24, 0x02, // Usage (AC Back) 77
+ * 0x0a, 0x25, 0x02, // Usage (AC Forward) 80
+ * 0x0a, 0x26, 0x02, // Usage (AC Stop) 83
+ * 0x0a, 0x27, 0x02, // Usage (AC Refresh) 86
+ * 0x0a, 0x2a, 0x02, // Usage (AC Bookmarks) 89
+ * 0x81, 0x02, // Input (Data,Var,Abs) 92
+ * 0x95, 0x01, // Report Count (1) 94
+ * 0x75, 0x0e, // Report Size (14) 96
+ * 0x81, 0x01, // Input (Cnst,Arr,Abs) 98
+ * 0xc0, // End Collection 100
+ * 0x05, 0x01, // Usage Page (Generic Desktop) 101
+ * 0x09, 0x02, // Usage (Mouse) 103
+ * 0xa1, 0x01, // Collection (Application) 105
+ * 0x09, 0x01, // Usage (Pointer) 107
+ * 0xa1, 0x00, // Collection (Physical) 109
+ * 0x85, 0x03, // Report ID (3) 111
+ * 0x05, 0x09, // Usage Page (Button) 113
+ * 0x19, 0x01, // Usage Minimum (1) 115
+ * 0x29, 0x08, // Usage Maximum (8) 117
+ * 0x15, 0x00, // Logical Minimum (0) 119
+ * 0x25, 0x01, // Logical Maximum (1) 121
+ * 0x75, 0x01, // Report Size (1) 123
+ * 0x95, 0x08, // Report Count (8) 125
+ * 0x81, 0x02, // Input (Data,Var,Abs) 127
+ * 0x05, 0x01, // Usage Page (Generic Desktop) 129
+ * 0x09, 0x30, // Usage (X) 131
+ * 0x09, 0x31, // Usage (Y) 133
+ * 0x16, 0x01, 0x80, // Logical Minimum (-32767) 135
+ * 0x26, 0xff, 0x7f, // Logical Maximum (32767) 138
+ * 0x75, 0x10, // Report Size (16) 141
+ * 0x95, 0x02, // Report Count (2) 143
+ * 0x81, 0x06, // Input (Data,Var,Rel) 145
+ * 0x09, 0x38, // Usage (Wheel) 147
+ * 0x15, 0x81, // Logical Minimum (-127) 149
+ * 0x25, 0x7f, // Logical Maximum (127) 151
+ * 0x75, 0x08, // Report Size (8) 153
+ * 0x95, 0x01, // Report Count (1) 155
+ * 0x81, 0x06, // Input (Data,Var,Rel) 157
+ * 0x05, 0x0c, // Usage Page (Consumer Devices) 159
+ * 0x0a, 0x38, 0x02, // Usage (AC Pan) 161
+ * 0x95, 0x01, // Report Count (1) 164
+ * 0x81, 0x06, // Input (Data,Var,Rel) 166
+ * 0xc0, // End Collection 168
+ * 0xc0, // End Collection 169
+ * 0x05, 0x01, // Usage Page (Generic Desktop) 170
+ * 0x09, 0x06, // Usage (Keyboard) 172
+ * 0xa1, 0x01, // Collection (Application) 174
+ * 0x85, 0x04, // Report ID (4) 176
+ * 0x05, 0x07, // Usage Page (Keyboard) 178
+ * 0x95, 0x01, // Report Count (1) 180
+ * 0x75, 0x08, // Report Size (8) 182
+ * 0x81, 0x03, // Input (Cnst,Var,Abs) 184
+ * 0x95, 0xe8, // Report Count (232) 186
+ * 0x75, 0x01, // Report Size (1) 188
+ * 0x15, 0x00, // Logical Minimum (0) 190
+ * 0x25, 0x01, // Logical Maximum (1) 192
+ * 0x05, 0x07, // Usage Page (Keyboard) 194
+ * 0x19, 0x00, // Usage Minimum (0) 196
+ * 0x29, 0xe7, // Usage Maximum (231) 198
+ * 0x81, 0x00, // Input (Data,Arr,Abs) 200 <- change to 0x81, 0x02 (Data,Var,Abs)
+ * 0xc0, // End Collection 202
+ */
+
+SEC(HID_BPF_RDESC_FIXUP)
+int BPF_PROG(hid_rdesc_fixup_mistel_md770, struct hid_bpf_ctx *hctx)
+{
+ __u8 *data = hid_bpf_get_data(hctx, 0, HID_MAX_DESCRIPTOR_SIZE);
+
+ if (!data)
+ return 0; /* EPERM check */
+
+ if (data[201] == 0x00)
+ data[201] = 0x02;
+
+ return 0;
+}
+
+HID_BPF_OPS(mistel_md770) = {
+ .hid_rdesc_fixup = (void *)hid_rdesc_fixup_mistel_md770,
+};
+
+SEC("syscall")
+int probe(struct hid_bpf_probe_args *ctx)
+{
+ ctx->retval = ctx->rdesc_size != RDESC_SIZE;
+ if (ctx->retval)
+ ctx->retval = -EINVAL;
+
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
--
2.47.0
next prev parent reply other threads:[~2024-10-17 15:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-17 15:35 [PATCH 0/2] HID: bpf: add a couple of HID-BPF device fixes Benjamin Tissoires
2024-10-17 15:35 ` Benjamin Tissoires [this message]
2024-10-17 15:35 ` [PATCH 2/2] HID: bpf: Fix Rapoo M50 Plus Silent side buttons Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241017-import_bpf_6-13-v1-1-197d882ade37@kernel.org \
--to=bentiss@kernel.org \
--cc=ishitatsuyuki@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).