[PATCH AUTOSEL 6.11 15/32] HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad

[PATCH AUTOSEL 6.11 15/32] HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad

[Sasha Levin]

From: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>

[ Upstream commit 293c485cbac2607595fdaae2b1fb390fc7b2d014 ]

Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.

After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)

The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.

In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.

Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.

[jkosina@suse.com: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h              |  1 +
 drivers/hid/i2c-hid/i2c-hid-core.c | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 8a991b30e3c6d..25f96494700d8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -509,6 +509,7 @@
 #define I2C_DEVICE_ID_GOODIX_01E8	0x01e8
 #define I2C_DEVICE_ID_GOODIX_01E9	0x01e9
 #define I2C_DEVICE_ID_GOODIX_01F0	0x01f0
+#define I2C_DEVICE_ID_GOODIX_0D42	0x0d42
 
 #define USB_VENDOR_ID_GOODTOUCH		0x1aad
 #define USB_DEVICE_ID_GOODTOUCH_000f	0x000f
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 2f8a9d3f1e861..8914c7db94718 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -50,6 +50,7 @@
 #define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(3)
 #define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET	BIT(4)
 #define I2C_HID_QUIRK_NO_SLEEP_ON_SUSPEND	BIT(5)
+#define I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME BIT(6)
 
 /* Command opcodes */
 #define I2C_HID_OPCODE_RESET			0x01
@@ -140,6 +141,8 @@ static const struct i2c_hid_quirks {
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
 		 I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET |
 		 I2C_HID_QUIRK_BOGUS_IRQ },
+	{ I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_0D42,
+		 I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME },
 	{ 0, 0 }
 };
 
@@ -981,6 +984,13 @@ static int i2c_hid_core_resume(struct i2c_hid *ihid)
 		return -ENXIO;
 	}
 
+	/* On Goodix 27c6:0d42 wait extra time before device wakeup.
+	 * It's not clear why but if we send wakeup too early, the device will
+	 * never trigger input interrupts.
+	 */
+	if (ihid->quirks & I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME)
+		msleep(1500);
+
 	/* Instead of resetting device, simply powers the device on. This
 	 * solves "incomplete reports" on Raydium devices 2386:3118 and
 	 * 2386:4B33 and fixes various SIS touchscreens no longer sending
-- 
2.43.0

[PATCH AUTOSEL 6.11 16/32] HID: multitouch: Add quirk for Logitech Bolt receiver w/ Casa touchpad

[Sasha Levin]

From: Kenneth Albanowski <kenalba@chromium.org>

[ Upstream commit 526748b925185e95f1415900ee13c2469d4b64cc ]

The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.

Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.

Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.

Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h        | 1 +
 drivers/hid/hid-multitouch.c | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 25f96494700d8..92cff3f2658cf 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -869,6 +869,7 @@
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1	0xc539
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1	0xc53f
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY	0xc53a
+#define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER	0xc548
 #define USB_DEVICE_ID_SPACETRAVELLER	0xc623
 #define USB_DEVICE_ID_SPACENAVIGATOR	0xc626
 #define USB_DEVICE_ID_DINOVO_DESKTOP	0xc704
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 847462650549e..462f2e6789bbc 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2128,6 +2128,10 @@ static const struct hid_device_id mt_devices[] = {
 		HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_LOGITECH,
 			USB_DEVICE_ID_LOGITECH_CASA_TOUCHPAD) },
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
+		HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_LOGITECH,
+			USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER) },
 
 	/* MosArt panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
-- 
2.43.0

[PATCH AUTOSEL 6.11 17/32] HID: lenovo: Add support for Thinkpad X1 Tablet Gen 3 keyboard

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 51268879eb2bfc563a91cdce69362d9dbf707e7e ]

The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks
as the original  Thinkpad X1 Tablet keyboard.

Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo
driver to fix the FnLock, Mute and media buttons not working.

Suggested-by: Izhar Firdaus <izhar@fedoraproject.org>
Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-lenovo.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index e5e72aa5260a9..24654c7ecb04e 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -473,6 +473,7 @@ static int lenovo_input_mapping(struct hid_device *hdev,
 		return lenovo_input_mapping_tp10_ultrabook_kbd(hdev, hi, field,
 							       usage, bit, max);
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		return lenovo_input_mapping_x1_tab_kbd(hdev, hi, field, usage, bit, max);
 	default:
 		return 0;
@@ -583,6 +584,7 @@ static ssize_t attr_fn_lock_store(struct device *dev,
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		ret = lenovo_led_set_tp10ubkbd(hdev, TP10UBKBD_FN_LOCK_LED, value);
 		if (ret)
 			return ret;
@@ -776,6 +778,7 @@ static int lenovo_event(struct hid_device *hdev, struct hid_field *field,
 		return lenovo_event_cptkbd(hdev, field, usage, value);
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		return lenovo_event_tp10ubkbd(hdev, field, usage, value);
 	default:
 		return 0;
@@ -1056,6 +1059,7 @@ static int lenovo_led_brightness_set(struct led_classdev *led_cdev,
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		ret = lenovo_led_set_tp10ubkbd(hdev, tp10ubkbd_led[led_nr], value);
 		break;
 	}
@@ -1286,6 +1290,7 @@ static int lenovo_probe(struct hid_device *hdev,
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		ret = lenovo_probe_tp10ubkbd(hdev);
 		break;
 	default:
@@ -1372,6 +1377,7 @@ static void lenovo_remove(struct hid_device *hdev)
 		break;
 	case USB_DEVICE_ID_LENOVO_TP10UBKBD:
 	case USB_DEVICE_ID_LENOVO_X1_TAB:
+	case USB_DEVICE_ID_LENOVO_X1_TAB3:
 		lenovo_remove_tp10ubkbd(hdev);
 		break;
 	}
@@ -1421,6 +1427,8 @@ static const struct hid_device_id lenovo_devices[] = {
 	 */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_TAB) },
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_TAB3) },
 	{ }
 };
 
-- 
2.43.0