[PATCH v3 6/7] Input: matrix_keypad - add settle time after enable all columns

[Markus Burri <markus.burri@mt.com>]

Matrix_keypad with high capacity need a longer settle time after enable
all columns and re-enabling interrupts.
This to give time stable the system and not generate interrupts.

Add a new optional device-tree property to configure the time before
enabling interrupts after disable all columns.
The default is no delay.

Signed-off-by: Markus Burri <markus.burri@mt.com>

---
 drivers/input/keyboard/matrix_keypad.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 90148d3..fdb3499 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -26,6 +26,7 @@ struct matrix_keypad {
 	unsigned int row_shift;
 
 	unsigned int col_scan_delay_us;
+	unsigned int all_cols_on_delay_us;
 	/* key debounce interval in milli-second */
 	unsigned int debounce_ms;
 	bool drive_inactive_cols;
@@ -77,6 +78,9 @@ static void activate_all_cols(struct matrix_keypad *keypad, bool on)
 
 	for (col = 0; col < keypad->num_col_gpios; col++)
 		__activate_col(keypad, col, on);
+
+	if (on && keypad->all_cols_on_delay_us)
+		fsleep(keypad->all_cols_on_delay_us);
 }
 
 static bool row_asserted(struct matrix_keypad *keypad, int row)
@@ -400,6 +404,8 @@ static int matrix_keypad_probe(struct platform_device *pdev)
 				 &keypad->debounce_ms);
 	device_property_read_u32(&pdev->dev, "col-scan-delay-us",
 				 &keypad->col_scan_delay_us);
+	device_property_read_u32(&pdev->dev, "all-cols-on-delay-us",
+				 &keypad->all_cols_on_delay_us);
 
 	err = matrix_keypad_init_gpio(pdev, keypad);
 	if (err)
-- 
2.39.5