Re: [PATCH v3 4/7] dt-bindings: input: matrix_keypad - add missing property

[Rob Herring <robh@kernel.org>]

On Tue, Jan 07, 2025 at 02:56:56PM +0100, Markus Burri wrote:
> The property is implemented in the driver but not described in dt-bindings.
> Add missing property 'gpio-activelow' to DT schema.
> 
> Signed-off-by: Markus Burri <markus.burri@mt.com>
> 
> ---
>  .../devicetree/bindings/input/gpio-matrix-keypad.yaml          | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
> index 75975a1..b10da65 100644
> --- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
> +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
> @@ -38,6 +38,9 @@ properties:
>      type: boolean
>      description: Do not enable autorepeat feature.
>  
> +  gpio-activelow:
> +    type: boolean
> +    description: The GPIOs are low active.

Ideally this should be defined correctly in the gpio properties. The 
problem is that does a 0 flag value mean active high or I forgot to 
define it. There's a similar issue in spi-controller.yaml. I *think* the 
problem is better here since this is an active low boolean rather than 
an active high boolean.

Of the users in the kernel tree, only 
arch/arm/boot/dts/ti/omap/am335x-guardian.dts got this right.

So I think we should mark this deprecated and put a note to use GPIO 
flags instead.

Rob