From: Werner Sembach <wse@tuxedocomputers.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Werner Sembach <wse@tuxedocomputers.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] Input: i8042: Swap old quirk combination with new quirk for more devices
Date: Thu, 13 Feb 2025 16:47:12 +0100 [thread overview]
Message-ID: <20250213160832.74484-4-wse@tuxedocomputers.com> (raw)
In-Reply-To: <20250213160832.74484-1-wse@tuxedocomputers.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: <stable@vger.kernel.org>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
drivers/input/serio/i8042-acpipnpio.h | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index d4ff34d36b42c..78e0d9c20800d 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1175,22 +1175,19 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
@@ -1257,8 +1254,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
@@ -1275,16 +1271,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/*
@@ -1295,8 +1289,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/*
@@ -1307,8 +1300,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/*
@@ -1330,8 +1322,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
--
2.43.0
prev parent reply other threads:[~2025-02-13 16:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 15:47 [PATCH 1/4] Input: i8042: Swap old quirk combination with new quirk for NHxxRZQ Werner Sembach
2025-02-13 15:47 ` [PATCH 2/4] Input: i8042: Add required quirks for missing old boardnames Werner Sembach
2025-02-13 15:47 ` [PATCH 3/4] Input: i8042: Swap old quirk combination with new quirk for severl devices Werner Sembach
2025-02-14 14:07 ` Werner Sembach
2025-02-13 15:47 ` Werner Sembach [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250213160832.74484-4-wse@tuxedocomputers.com \
--to=wse@tuxedocomputers.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).