[PATCH v3 0/4] Add Xiaomi Poco F1 touchscreen support

[PATCH v3 0/4] Add Xiaomi Poco F1 touchscreen support

[Joel Selvaraj via B4 Relay]

In the first patch, I have updated the edt-ft5x06 touchscreen binding 
documentation. In Xiaomi Poco F1(qcom/sdm845-xiaomi-beryllium-ebbg.dts),
the FocalTech FT8719 touchscreen is integrally connected to the display 
panel (EBBG FT8719) and thus should be power sequenced together with 
display panel for proper functioning using the panel property. Since the
edt-ft5x06 touchscreen binding uses almost all the properties present in 
touchscreen.yaml, let's remove additionalProperties: false and use 
unevaluatedProperties to include all the properties, including the needed
panel property.

In the second patch, I have enabled the qupv3_id_1 and gpi_dma1 as they
are required for configuring touchscreen. Also added the pinctrl
configurations. These are common for both the Poco F1 Tianma and EBBG
panel variant.

In the subsequent patches, I have enabled support for the Novatek NT36672a
touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
Tianma and EBBG panel variant respectively.

Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
---
Changes in v3:
- Fix SoB email id mismatch (suggested by Krzysztof Kozlowski)
- Use unevaluatedProperties instead additionalProperties in dt-binding (suggested by Krzysztof Kozlowski)
- Link to v2: https://lore.kernel.org/r/20241208-pocof1-touchscreen-support-v2-0-5a6e7739ef45@joelselvaraj.com

Changes in v2:
- Fixed the missing "panel" property dt-binding error reported by Rob Herring's bot.
- Change the "input-enable" property to "output-disable" in qcom/sdm845-xiaomi-beryllium-common.dtsi
  (Based on a patch suggested by Konrad Dybcio).
- Link to v1: https://lore.kernel.org/r/20241007-pocof1-touchscreen-support-v1-0-db31b21818c5@joelselvaraj.com

---
Joel Selvaraj (4):
      dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties
      arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
      arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
      arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support

 .../bindings/input/touchscreen/edt-ft5x06.yaml     |  9 +----
 .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi   | 39 ++++++++++++++++++++++
 .../boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts | 23 +++++++++++++
 .../dts/qcom/sdm845-xiaomi-beryllium-tianma.dts    | 23 +++++++++++++
 4 files changed, 86 insertions(+), 8 deletions(-)
---
base-commit: c0eb65494e59d9834af7cbad983629e9017b25a1
change-id: 20241007-pocof1-touchscreen-support-c752a162cdc2

Best regards,
-- 
Joel Selvaraj <foss@joelselvaraj.com>

[PATCH v3 1/4] dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties

[Joel Selvaraj via B4 Relay]

From: Joel Selvaraj <foss@joelselvaraj.com>

In Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium-ebbg.dts), the FocalTech
FT8719 touchscreen is integrally connected to the display panel
(EBBG FT8719) and thus should be power sequenced together with display
panel using the panel property. Since the touchscreen controller uses
almost all the properties present in touchscreen.yaml, let's remove
additionalProperties: false and use unevaluatedProperties to include all
the properties including the needed panel property.

Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
---
 .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml        | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 70a922e213f2..ab821490284a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -103,16 +103,9 @@ properties:
     minimum: 0
     maximum: 255
 
-  touchscreen-size-x: true
-  touchscreen-size-y: true
-  touchscreen-fuzz-x: true
-  touchscreen-fuzz-y: true
-  touchscreen-inverted-x: true
-  touchscreen-inverted-y: true
-  touchscreen-swapped-x-y: true
   interrupt-controller: true
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible

-- 
2.48.1

Re: [PATCH v3 1/4] dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties

[Joel Selvaraj]

On Saturday, March 1st, 2025 at 5:43 PM, Joel Selvaraj via B4 Relay <devnull+foss.joelselvaraj.com@kernel.org> wrote:
> ...clipped...
> Since the touchscreen controller uses almost all the properties present in touchscreen.yaml...

Sorry, should have been "Since the edt-ft5x06 touchscreen binding document uses almost all the properties...".
I will wait for further review by others and will fix it v4. Or if it is acceptable with current commit message,
let me know.

Thanks,
Joel Selvaraj

Re: [PATCH v3 1/4] dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties

[Krzysztof Kozlowski]

On Sat, Mar 01, 2025 at 05:43:07PM -0600, Joel Selvaraj wrote:
> In Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium-ebbg.dts), the FocalTech
> FT8719 touchscreen is integrally connected to the display panel
> (EBBG FT8719) and thus should be power sequenced together with display
> panel using the panel property. Since the touchscreen controller uses
> almost all the properties present in touchscreen.yaml, let's remove
> additionalProperties: false and use unevaluatedProperties to include all
> the properties including the needed panel property.
> 
> Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
> ---
>  .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml        | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 2/4] arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes

[Joel Selvaraj via B4 Relay]

From: Joel Selvaraj <foss@joelselvaraj.com>

Enable qupv3_id_1 and gpi_dma1 as they are required for configuring
touchscreen. Also add pinctrl configurations needed for touchscreen.
These are common for both the tianma and ebbg touchscreen variant.
In the subsequent patches, we will enable support for the Novatek NT36672a
touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
Tianma and EBBG panel variant respectively. This is done in preparation
for that.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
---
 .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi   | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 617b17b2d7d9..e93ed6effdd7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -243,6 +243,10 @@ &gmu {
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -408,6 +412,10 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &sdhc_2 {
 	status = "okay";
 
@@ -513,6 +521,37 @@ sdc2_card_det_n: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_sleep: ts-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart6 {

-- 
2.48.1

Re: [PATCH v3 2/4] arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes

[Krzysztof Kozlowski]

On Sat, Mar 01, 2025 at 05:43:08PM -0600, Joel Selvaraj wrote:
> Enable qupv3_id_1 and gpi_dma1 as they are required for configuring
> touchscreen. Also add pinctrl configurations needed for touchscreen.
> These are common for both the tianma and ebbg touchscreen variant.
> In the subsequent patches, we will enable support for the Novatek NT36672a
> touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
> Tianma and EBBG panel variant respectively. This is done in preparation
> for that.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
> ---
>  .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi   | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 3/4] arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support

[Joel Selvaraj via B4 Relay]

From: Joel Selvaraj <foss@joelselvaraj.com>

Enable the Novatek NT36672A touchscreen controller used in the Poco F1
(Tianma) panel variant.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
---
 .../dts/qcom/sdm845-xiaomi-beryllium-tianma.dts    | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
index e9427851ebaa..b58964cde834 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -13,3 +13,26 @@ &display_panel {
 	compatible = "tianma,fhd-video", "novatek,nt36672a";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@1 {
+		compatible = "novatek,nt36672a-ts";
+		reg = <0x01>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};

-- 
2.48.1

Re: [PATCH v3 3/4] arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support

[Krzysztof Kozlowski]

On Sat, Mar 01, 2025 at 05:43:09PM -0600, Joel Selvaraj wrote:
> Enable the Novatek NT36672A touchscreen controller used in the Poco F1
> (Tianma) panel variant.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
> ---
>  .../dts/qcom/sdm845-xiaomi-beryllium-tianma.dts    | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
> index e9427851ebaa..b58964cde834 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
> @@ -13,3 +13,26 @@ &display_panel {
>  	compatible = "tianma,fhd-video", "novatek,nt36672a";
>  	status = "okay";
>  };

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 4/4] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support

[Joel Selvaraj via B4 Relay]

From: Joel Selvaraj <foss@joelselvaraj.com>

Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
(EBBG) panel variant.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
---
 .../boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
index 76931ebad065..2d6f0e382a6c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -13,3 +13,26 @@ &display_panel {
 	compatible = "ebbg,ft8719";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,ft8719";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};

-- 
2.48.1

Re: [PATCH v3 4/4] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support

[Krzysztof Kozlowski]

On Sat, Mar 01, 2025 at 05:43:10PM -0600, Joel Selvaraj wrote:
> Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
> (EBBG) panel variant.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
> ---
>  .../boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof