[PATCH 03/18] pwm: adp5585: don't control OSC_EN in the pwm driver

["Nuno Sá via B4 Relay" <devnull+nuno.sa.analog.com@kernel.org>]

From: Nuno Sá <nuno.sa@analog.com>

The adp5585 is a Multi Function Device that can also be a gpio
controller and as it turns out, when OSC_EN is not set, we can't
reliably read the gpio value when it's configured as input. Hence,
OSC_EN will be set during probe by the parent device (and cleared on
unbind).

Moreover, we'll add support for the keymap matrix (input device) which
definitely needs OSC_EN to be set and so, we cannot afford that disabling
the PWM output also breaks the keymap events generation.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
---
 drivers/pwm/pwm-adp5585.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/pwm/pwm-adp5585.c b/drivers/pwm/pwm-adp5585.c
index 40472ac5db6410a33e4f790fe8e6c23b517502be..c8821035b7c1412a55a642e6e8a46b66e693a5af 100644
--- a/drivers/pwm/pwm-adp5585.c
+++ b/drivers/pwm/pwm-adp5585.c
@@ -62,7 +62,6 @@ static int pwm_adp5585_apply(struct pwm_chip *chip,
 	int ret;
 
 	if (!state->enabled) {
-		regmap_clear_bits(regmap, ADP5585_GENERAL_CFG, ADP5585_OSC_EN);
 		regmap_clear_bits(regmap, ADP5585_PWM_CFG, ADP5585_PWM_EN);
 		return 0;
 	}
@@ -100,10 +99,6 @@ static int pwm_adp5585_apply(struct pwm_chip *chip,
 	if (ret)
 		return ret;
 
-	ret = regmap_set_bits(regmap, ADP5585_GENERAL_CFG, ADP5585_OSC_EN);
-	if (ret)
-		return ret;
-
 	return regmap_set_bits(regmap, ADP5585_PWM_CFG, ADP5585_PWM_EN);
 }
 

-- 
2.48.1